model = "FRITZ3370 - Fritz!Box WLAN 3370";
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
+ bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
+
+ leds {
+ boot = &power_green;
+ failsafe = &power_red;
+ running = &power_green;
+
+ dsl = &dsl;
+ internet = &info_green;
+ wifi = &wifi;
+ };
};
memory@0 {
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "kernel";
- reg = <0x00000 0x400000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x3000000>;
- };
-
- partition@3400000 {
- label = "vr9_firmware";
- reg = <0x3400000 0x400000>;
- };
- partition@3800000 {
- label = "reserved";
- reg = <0x3800000 0x3000000>;
- };
- partition@6800000 {
- label = "config";
- reg = <0x6800000 0x200000>;
- };
- partition@6a00000 {
- label = "nand-filesystem";
- reg = <0x6a00000 0x1600000>;
- };
- };
- };
-
- spi@E100800 {
- compatible = "lantiq,spi-xway-broken";
- reg = <0xE100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <22 23 24>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl129p0";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <1000000>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "ENV_MAC";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "DPF";
- read-only;
- };
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
- partition@40000 {
- reg = <0x40000 0x10000>;
- label = "NVRAM";
- read-only;
- };
+ partition@400000 {
+ label = "rootfs_ubi";
+ reg = <0x400000 0x3000000>;
+ };
- partition@500000 {
- reg = <0x50000 0x003a0000>;
- label = "kernel";
+ partition@3400000 {
+ label = "vr9_firmware";
+ reg = <0x3400000 0x400000>;
+ };
+ partition@3800000 {
+ label = "reserved";
+ reg = <0x3800000 0x3000000>;
+ };
+ partition@6800000 {
+ label = "config";
+ reg = <0x6800000 0x200000>;
+ };
+ partition@6a00000 {
+ label = "nand-filesystem";
+ reg = <0x6a00000 0x1600000>;
+ };
};
};
};
pinctrl-0 = <&state_default>;
state_default: pinmux {
- spi {
- lantiq,groups = "spi", "spi_cs4";
- lantiq,function = "spi";
- };
- nand_out {
- lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
- lantiq,function = "ebu";
- lantiq,direction = <1>;
- lantiq,pull = <0>;
- };
- nand_in {
- lantiq,groups = "nand rdy";
- lantiq,function = "ebu";
- lantiq,direction = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
+ nand {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd", "nand cs1", "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,pull = <1>;
+ };
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
- };
-
- eth@E108000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
- 0xE10B308 0x30 /* pmac */
- >;
- interrupt-parent = <&icu0>;
- interrupts = <73 72>;
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- gpios = <&gpio 37 0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- gpios = <&gpio 44 0>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ pins_spi_default: pins_spi_default {
+ spi_in {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
};
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ spi_out {
+ lantiq,groups = "spi_do", "spi_clk",
+ "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
};
};
};
};
};
+ ath9k_eep {
+ compatible = "ath9k,eeprom";
+ ath,eep-flash = <&ath9k_cal 0x985>;
+ ath,eep-endian;
+ ath,eep-swap;
+ };
+
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
gpio-leds {
compatible = "gpio-leds";
- power {
- label = "power";
+ power_green: power {
+ label = "fritz3370:green:power";
gpios = <&gpio 32 1>;
+ default-state = "keep";
};
- power2 {
- label = "power2";
+ power_red: power2 {
+ label = "fritz3370:red:power";
gpios = <&gpio 33 1>;
};
info_red {
- label = "info_red";
+ label = "fritz3370:red:info";
gpios = <&gpio 34 1>;
};
- wifi {
- label = "wifi";
+ wifi: wifi {
+ label = "fritz3370:green:wlan";
gpios = <&gpio 35 1>;
};
- dsl {
- label = "dsl";
+ dsl: dsl {
+ label = "fritz3370:green:dsl";
gpios = <&gpio 36 1>;
};
lan {
- label = "lan";
+ label = "fritz3370:green:lan";
gpios = <&gpio 38 1>;
};
- info_green {
- label = "info_green";
+ info_green: info_green {
+ label = "fritz3370:green:info";
gpios = <&gpio 47 1>;
};
};
};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_spi_default>;
+
+ status = "ok";
+
+ m25p80@4 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <4 0>;
+ spi-max-frequency = <1000000>;
+
+ ath9k_cal: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ gpios = <&gpio 37 0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ gpios = <&gpio 44 0>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};