2 files changed, 258 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 38c89ca..745360a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-new file mode 100644
-index 0000000..224c54f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -0,0 +1,257 @@
+@@ -0,0 +1,132 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
-+ aliases {
-+ mdio-gpio0 = &mdio0;
-+ };
-+
+ soc {
+ pinmux@800000 {
-+ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
-+ pinctrl-names = "default";
-+
+ i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ bias-none;
+ };
+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii0_pinmux: rgmii0_pinmux {
-+ mux {
-+ pins = "gpio2", "gpio66";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
+ };
+
+ gsbi2: gsbi@12480000 {
+ usb30@1 {
+ status = "ok";
+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+
-+ phy6: ethernet-phy@6 {
-+ device_type = "ethernet-phy";
-+ reg = <6>;
-+ };
-+
-+ phy7: ethernet-phy@7 {
-+ device_type = "ethernet-phy";
-+ reg = <7>;
-+ };
-+ };
-+
-+ nss-gmac-common {
-+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
-+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
-+ };
-+
-+ gmac0: ethernet@37000000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <0>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,rgmii_delay = <1>;
-+ qcom,emulation = <0>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ qcom,socver = <0>;
-+ local-mac-address = [000000000000];
-+ mdiobus = <&mdio0>;
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <0>;
-+ qcom,poll_required = <0>;
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ qcom,socver = <0>;
-+ local-mac-address = [000000000000];
-+ mdiobus = <&mdio0>;
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <6>;
-+ qcom,poll_required = <1>;
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ qcom,forced_speed = <0>;
-+ qcom,forced_duplex = <0>;
-+ qcom,socver = <0>;
-+ local-mac-address = [000000000000];
-+ mdiobus = <&mdio0>;
-+ };
-+
-+ gmac3: ethernet@37600000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <3>;
-+ qcom,phy_mdio_addr = <7>;
-+ qcom,poll_required = <1>;
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ qcom,forced_speed = <0>;
-+ qcom,forced_duplex = <0>;
-+ qcom,socver = <0>;
-+ local-mac-address = [000000000000];
-+ mdiobus = <&mdio0>;
-+ };
+ };
+};
---
-1.9.1
-