ipq40xx: consolidate DTS files

[oweals/openwrt.git] / target / linux / ipq40xx / files-4.19 / arch / arm / boot / dts / qcom-ipq4018-a42.dts

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
deleted file mode 100644 (file)
index 33c44a8..0000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-       model = "OpenMesh A42";
-       compatible = "openmesh,a42";
-
-       soc {
-               rng@22000 {
-                       status = "okay";
-               };
-
-               mdio@90000 {
-                       status = "okay";
-               };
-
-               ess-psgmii@98000 {
-                       status = "okay";
-               };
-
-               tcsr@194b000 {
-                       /* select hostmode */
-                       compatible = "qcom,tcsr";
-                       reg = <0x194b000 0x100>;
-                       qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-                       status = "okay";
-               };
-
-               tcsr@1949000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1949000 0x100>;
-                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-               };
-
-               ess_tcsr@1953000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1953000 0x1000>;
-                       qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-               };
-
-               tcsr@1957000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1957000 0x100>;
-                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-               };
-
-               usb2: usb2@60f8800 {
-                       status = "okay";
-               };
-
-               crypto@8e3a000 {
-                       status = "okay";
-               };
-
-               watchdog@b017000 {
-                       status = "okay";
-               };
-
-               ess-switch@c000000 {
-                       status = "okay";
-               };
-
-               edma@c080000 {
-                       status = "okay";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               red {
-                       label = "a42:red:status";
-                       gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "default-off";
-               };
-
-               power: green {
-                       label = "a42:green:status";
-                       gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-               };
-
-               blue {
-                       label = "a42:blue:status";
-                       gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "default-off";
-               };
-       };
-
-       watchdog {
-               compatible = "linux,wdt-gpio";
-               gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-               hw_algo = "toggle";
-               /* hw_margin_ms is actually 300s but driver limits it to 60s */
-               hw_margin_ms = <60000>;
-               always-running;
-       };
-};
-
-&tlmm {
-       serial_pins: serial_pinmux {
-               mux {
-                       pins = "gpio60", "gpio61";
-                       function = "blsp_uart0";
-                       bias-disable;
-               };
-       };
-
-       spi_0_pins: spi_0_pinmux {
-               pin {
-                       function = "blsp_spi0";
-                       pins = "gpio55", "gpio56", "gpio57";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-               pin_cs {
-                       function = "gpio";
-                       pins = "gpio54";
-                       drive-strength = <2>;
-                       bias-disable;
-                       output-high;
-               };
-       };
-};
-
-&blsp_dma {
-       status = "okay";
-};
-
-&blsp1_spi1 {
-       pinctrl-0 = <&spi_0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <24000000>;
-               /* partitions are passed via bootloader */
-       };
-};
-
-&blsp1_uart1 {
-       pinctrl-0 = <&serial_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&cryptobam {
-       status = "okay";
-};
-
-&gmac0 {
-       qcom,phy_mdio_addr = <4>;
-       qcom,poll_required = <1>;
-       qcom,forced_speed = <1000>;
-       qcom,forced_duplex = <1>;
-       vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-       qcom,phy_mdio_addr = <3>;
-       qcom,poll_required = <1>;
-       qcom,forced_speed = <1000>;
-       qcom,forced_duplex = <1>;
-       vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-       status = "okay";
-};
-
-&wifi0 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "OM-A42";
-};