help
PCI core hostmode operation (external PCI bus).
+@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
+
+ If unsure, say N
+
++config BCMA_SFLASH
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
++config BCMA_NFLASH
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
++config BCMA_DRIVER_GMAC_CMN
++ bool "BCMA Broadcom GBIT MAC COMMON core driver"
++ depends on BCMA
++ help
++ Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
++ specific Advanced Microcontroller Bus.
++
++ If unsure, say N
++
++config BCMA_DRIVER_GPIO
++ bool "BCMA GPIO driver"
++ depends on BCMA && GPIOLIB
++ help
++ Driver to provide access to the GPIO pins of the bcma bus.
++
++ If unsure, say N
++
+ config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -1,8 +1,12 @@
+ bcma-y += main.o scan.o core.o sprom.o
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
++bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
++bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
+ bcma-y += driver_pci.o
+ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
++bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+ obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -13,7 +13,7 @@
+@@ -10,10 +10,19 @@
+
+ #define BCMA_CORE_SIZE 0x1000
+
++#define bcma_err(bus, fmt, ...) \
++ pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_warn(bus, fmt, ...) \
++ pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_info(bus, fmt, ...) \
++ pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_debug(bus, fmt, ...) \
++ pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++
struct bcma_bus;
- /* main.c */
--int bcma_bus_register(struct bcma_bus *bus);
-+int __devinit bcma_bus_register(struct bcma_bus *bus);
- void bcma_bus_unregister(struct bcma_bus *bus);
- int __init bcma_bus_early_register(struct bcma_bus *bus,
- struct bcma_device *core_cc,
-@@ -48,8 +48,12 @@ extern int __init bcma_host_pci_init(voi
- extern void __exit bcma_host_pci_exit(void);
- #endif /* CONFIG_BCMA_HOST_PCI */
+ /* main.c */
+-int bcma_bus_register(struct bcma_bus *bus);
++int __devinit bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+ struct bcma_device *core_cc,
+@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit);
+
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
+@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+ /* driver_chipcommon_pmu.c */
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
++
++#ifdef CONFIG_BCMA_SFLASH
++/* driver_chipcommon_sflash.c */
++int bcma_sflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_sflash_dev;
++#else
++static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
++{
++ bcma_err(cc->core->bus, "Serial flash not supported\n");
++ return 0;
++}
++#endif /* CONFIG_BCMA_SFLASH */
++
++#ifdef CONFIG_BCMA_NFLASH
++/* driver_chipcommon_nflash.c */
++int bcma_nflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_nflash_dev;
++#else
++static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
++{
++ bcma_err(cc->core->bus, "NAND flash not supported\n");
++ return 0;
++}
++#endif /* CONFIG_BCMA_NFLASH */
+
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
+ extern void __exit bcma_host_pci_exit(void);
+ #endif /* CONFIG_BCMA_HOST_PCI */
+
++/* driver_pci.c */
++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
++
++extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
++
+ #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++/* driver_gpio.c */
++int bcma_gpio_init(struct bcma_drv_cc *cc);
++#else
++static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ return -ENOTSUPP;
++}
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
+ #endif
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
+ udelay(10);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+@@ -64,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
+ switch (clkmode) {
+ case BCMA_CLKMODE_FAST:
+ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+- udelay(64);
++ usleep_range(64, 300);
+ for (i = 0; i < 1500; i++) {
+ if (bcma_read32(core, BCMA_CLKCTLST) &
+ BCMA_CLKCTLST_HAVEHT) {
+@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+ udelay(10);
+ }
+ if (i)
+- pr_err("HT force timeout\n");
++ bcma_err(core->bus, "HT force timeout\n");
+ break;
+ case BCMA_CLKMODE_DYNAMIC:
+- pr_warn("Dynamic clockmode not supported yet!\n");
++ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT);
+ break;
+ }
+ }
+@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+ udelay(10);
+ }
+ if (i)
+- pr_err("PLL enable timeout\n");
++ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- pr_warn("Disabling PLL not supported yet!\n");
++ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+ else
+ return BCMA_DMA_TRANSLATION_DMA32_CMT;
+ default:
+- pr_err("DMA translation unknown for host %d\n",
+- core->bus->hosttype);
++ bcma_err(core->bus, "DMA translation unknown for host %d\n",
++ core->bus->hosttype);
+ }
+ return BCMA_DMA_TRANSLATION_NONE;
+ }
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -4,12 +4,15 @@
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include "bcma_private.h"
++#include <linux/bcm47xx_wdt.h>
+ #include <linux/export.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+
+ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
+ return value;
+ }
+
+-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+- u32 leddc_on = 10;
+- u32 leddc_off = 90;
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ return bcma_pmu_get_alp_clock(cc);
+
+- if (cc->setup_done)
++ return 20000000;
++}
++
++static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 nb;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ nb = 32;
++ else if (cc->core->id.rev < 26)
++ nb = 16;
++ else
++ nb = (cc->core->id.rev >= 37) ? 32 : 24;
++ } else {
++ nb = 28;
++ }
++ if (nb == 32)
++ return 0xffffffff;
++ else
++ return (1 << nb) - 1;
++}
++
++static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
++ u32 ticks)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++
++ return bcma_chipco_watchdog_timer_set(cc, ticks);
++}
++
++static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
++ u32 ms)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++ u32 ticks;
++
++ ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
++ return ticks / cc->ticks_per_ms;
++}
++
++static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
++ return bcma_chipco_get_alp_clock(cc) / 4000;
++ else
++ /* based on 32KHz ILP clock */
++ return 32;
++ } else {
++ return bcma_chipco_get_alp_clock(cc) / 1000;
++ }
++}
++
++int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
++{
++ struct bcm47xx_wdt wdt = {};
++ struct platform_device *pdev;
++
++ wdt.driver_data = cc;
++ wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
++ wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
++ wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
++
++ pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
++ cc->core->bus->num, &wdt,
++ sizeof(wdt));
++ if (IS_ERR(pdev))
++ return PTR_ERR(pdev);
++
++ cc->watchdog = pdev;
++
++ return 0;
++}
++
++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
++{
++ if (cc->early_setup_done)
+ return;
+
++ spin_lock_init(&cc->gpio_lock);
++
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+ if (cc->core->id.rev >= 35)
+ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ bcma_pmu_early_init(cc);
++
++ cc->early_setup_done = true;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++ u32 leddc_on = 10;
++ u32 leddc_off = 90;
++
++ if (cc->setup_done)
++ return;
++
++ bcma_core_chipcommon_early_init(cc);
++
+ if (cc->core->id.rev >= 20) {
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+@@ -44,7 +146,7 @@ void bcma_core_chipcommon_init(struct bc
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+ bcma_pmu_init(cc);
+ if (cc->capabilities & BCMA_CC_CAP_PCTL)
+- pr_err("Power control not implemented!\n");
++ bcma_err(cc->core->bus, "Power control not implemented!\n");
+
+ if (cc->core->id.rev >= 16) {
+ if (cc->core->bus->sprom.leddc_on_time &&
+@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
+ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
+ }
++ cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
+
+ cc->setup_done = true;
+ }
+
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+-void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
++u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+ {
+- /* instant NMI */
+- bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ u32 maxt;
++ enum bcma_clkmode clkmode;
++
++ maxt = bcma_chipco_watchdog_get_max_timer(cc);
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (ticks == 1)
++ ticks = 2;
++ else if (ticks > maxt)
++ ticks = maxt;
++ bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
++ } else {
++ clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
++ bcma_core_set_clockmode(cc->core, clkmode);
++ if (ticks > maxt)
++ ticks = maxt;
++ /* instant NMI */
++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ }
++ return ticks;
+ }
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
++/*
++ * If the bit is set to 0, chipcommon controlls this GPIO,
++ * if the bit is set to 1, it is used by some part of the chip and not our code.
++ */
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
+ struct bcma_serial_port *ports = cc->serial_ports;
+
+ if (ccrev >= 11 && ccrev != 15) {
+- /* Fixed ALP clock */
+- baud_base = bcma_pmu_alp_clock(cc);
++ baud_base = bcma_chipco_get_alp_clock(cc);
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+@@ -137,8 +325,7 @@ void bcma_chipco_serial_init(struct bcma
+ | BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ } else {
+- pr_err("serial not supported on this device ccrev: 0x%x\n",
+- ccrev);
++ bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev);
+ return;
+ }
+
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_nflash.c
+@@ -0,0 +1,44 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon NAND flash interface
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++struct platform_device bcma_nflash_dev = {
++ .name = "bcma_nflash",
++ .num_resources = 0,
++};
++
++/* Initialize NAND flash access */
++int bcma_nflash_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
++ cc->core->id.rev != 0x38) {
++ bcma_err(bus, "NAND flash on unsupported board!\n");
++ return -ENOTSUPP;
++ }
++
++ if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) {
++ bcma_err(bus, "NAND flash not present according to ChipCommon\n");
++ return -ENODEV;
++ }
++
++ cc->nflash.present = true;
++ if (cc->core->id.rev == 38 &&
++ (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
++ cc->nflash.boot = true;
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ bcma_nflash_dev.dev.platform_data = &cc->nflash;
++
++ return 0;
++}
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -3,7 +3,8 @@
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <m@bues.ch>
+- * Copyright 2007, Broadcom Corporation
++ * Copyright 2007, 2011, Broadcom Corporation
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -12,12 +13,13 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
+-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
+-static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+-{
+- struct bcma_bus *bus = cc->core->bus;
+-
+- switch (bus->chipinfo.id) {
+- case 0x4313:
+- case 0x4331:
+- case 43224:
+- case 43225:
+- break;
+- default:
+- pr_err("PLL init unknown for device 0x%04X\n",
+- bus->chipinfo.id);
+- }
+-}
+-
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ u32 min_msk = 0, max_msk = 0;
+
+ switch (bus->chipinfo.id) {
+- case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
+- case 43224:
+- case 43225:
+- break;
+ default:
+- pr_err("PMU resource config unknown for device 0x%04X\n",
+- bus->chipinfo.id);
++ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
++ bus->chipinfo.id);
+ }
+
+ /* Set the resource masks. */
+@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
+ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+ if (max_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+-}
+-
+-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+-{
+- struct bcma_bus *bus = cc->core->bus;
+
+- switch (bus->chipinfo.id) {
+- case 0x4313:
+- case 0x4331:
+- case 43224:
+- case 43225:
+- break;
+- default:
+- pr_err("PMU switch/regulators init unknown for device "
+- "0x%04X\n", bus->chipinfo.id);
+- }
++ /*
++ * Add some delay; allow resources to come up and settle.
++ * Delay is required for SoC (early init).
++ */
++ mdelay(2);
+ }
+
+ /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ val |= BCMA_CHIPCTL_4331_EXTPA_EN;
+ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
+ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
++ else if (bus->chipinfo.rev > 0)
++ val |= BCMA_CHIPCTL_4331_EXTPA_EN2;
+ } else {
+ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2;
+ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+ }
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+ }
+
+-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4313:
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
++ case BCMA_CHIP_ID_BCM4313:
++ /* enable 12 mA drive strenth for 4313 and set chipControl
++ register bit 1 */
++ bcma_chipco_chipctl_maskset(cc, 0,
++ ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
++ BCMA_CCTRL_4313_12MA_LED_DRIVE);
+ break;
+- case 0x4331:
+- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43431:
++ /* Ext PA lines must be enabled for tx on BCM4331 */
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
+ break;
+- case 43224:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43421:
++ /* enable 12 mA drive strenth for 43224 and set chipControl
++ register bit 15 */
+ if (bus->chipinfo.rev == 0) {
+- pr_err("Workarounds for 43224 rev 0 not fully "
+- "implemented\n");
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
++ ~BCMA_CCTRL_43224_GPIO_TOGGLE,
++ BCMA_CCTRL_43224_GPIO_TOGGLE);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
+ } else {
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
+ }
+ break;
+- case 43225:
+- break;
+ default:
+- pr_err("Workarounds unknown for device 0x%04X\n",
+- bus->chipinfo.id);
++ bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n",
++ bus->chipinfo.id);
+ }
+ }
+
+-void bcma_pmu_init(struct bcma_drv_cc *cc)
++void bcma_pmu_early_init(struct bcma_drv_cc *cc)
+ {
+ u32 pmucap;
+
+ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+- pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+- pmucap);
++ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
++}
+
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
+ if (cc->pmu.rev == 1)
+ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+ ~BCMA_CC_PMU_CTL_NOILPONW);
+@@ -174,37 +165,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
+- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+-
+- bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+- bcma_pmu_swreg_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4716:
+- case 0x4748:
+- case 47162:
+- case 0x4313:
+- case 0x5357:
+- case 0x4749:
+- case 53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM53572:
+ /* always 20Mhz */
+ return 20000 * 1000;
+- case 0x5356:
+- case 0x5300:
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM4706:
+ /* always 25Mhz */
+ return 25000 * 1000;
+ default:
+- pr_warn("No ALP clock specified for %04X device, "
+- "pmu rev. %d, using default %d Hz\n",
+- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
++ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+ }
+ return BCMA_CC_PMU_ALP_CLOCK;
+ }
+@@ -212,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ /* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+-static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+ {
+ u32 tmp, div, ndiv, p1, p2, fc;
+ struct bcma_bus *bus = cc->core->bus;
+@@ -221,7 +206,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+
+ BUG_ON(!m || m > 4);
+
+- if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) {
+ /* Detect failure in clock setting */
+ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ if (tmp & 0x40000)
+@@ -240,60 +226,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+ /* Do calculation in Mhz */
+- fc = bcma_pmu_alp_clock(cc) / 1000000;
++ fc = bcma_pmu_get_alp_clock(cc) / 1000000;
+ fc = (p1 * ndiv * fc) / p2;
+
+ /* Return clock in Hertz */
+ return (fc / div) * 1000000;
+ }
+
++static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++{
++ u32 tmp, ndiv, p1div, p2div;
++ u32 clock;
++
++ BUG_ON(!m || m > 4);
++
++ /* Get N, P1 and P2 dividers to determine CPU clock */
++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
++ ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
++ p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
++ p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;
++
++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
++ if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
++ /* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
++ clock = (25000000 / 4) * ndiv * p2div / p1div;
++ else
++ /* Fixed reference clock 25MHz and m = 2 */
++ clock = (25000000 / 2) * ndiv * p2div / p1div;
++
++ if (m == BCMA_CC_PMU5_MAINPLL_SSB)
++ clock = clock / 4;
++
++ return clock;
++}
++
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4716:
+- case 0x4748:
+- case 47162:
+- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5356:
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5357:
+- case 0x4749:
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5300:
+- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
+- case 53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5356:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM4706:
++ return bcma_pmu_pll_clock_bcm4706(cc,
++ BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM53572:
+ return 75000000;
+ default:
+- pr_warn("No backplane clock specified for %04X device, "
+- "pmu rev. %d, using default %d Hz\n",
+- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
++ bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+ }
+ return BCMA_CC_PMU_HT_CLOCK;
+ }
+
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+- if (bus->chipinfo.id == 53572)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
+ return 300000000;
+
++ /* New PMUs can have different clock for bus and CPU */
+ if (cc->pmu.rev >= 5) {
+ u32 pll;
+ switch (bus->chipinfo.id) {
+- case 0x5356:
++ case BCMA_CHIP_ID_BCM4706:
++ return bcma_pmu_pll_clock_bcm4706(cc,
++ BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_CPU);
++ case BCMA_CHIP_ID_BCM5356:
+ pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
+ break;
+- case 0x5357:
+- case 0x4749:
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
+ pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
+ break;
+ default:
+@@ -301,10 +322,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+ break;
+ }
+
+- /* TODO: if (bus->chipinfo.id == 0x5300)
+- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
+- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ }
++
++ /* On old PMUs CPU has the same clock as the bus */
++ return bcma_pmu_get_bus_clock(cc);
++}
++
++static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
++ u32 value)
++{
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
++}
++
++void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
++{
++ u32 tmp = 0;
++ u8 phypll_offset = 0;
++ u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5};
++ u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc};
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM53572:
++ /* 5357[ab]0, 43236[ab]0, and 6362b0 */
++
++ /* BCM5357 needs to touch PLL1_PLLCTL[02],
++ so offset PLL0_PLLCTL[02] by 6 */
++ phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
++
++ /* RMW only the P1 divider */
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++ BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++ tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
++ tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++
++ /* RMW only the int feedback divider */
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++ BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++ tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
++ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43431:
++ if (spuravoid == 2) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0FC00a08);
++ } else if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600a08);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ }
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43421:
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500010);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x000C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x2001E920);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100010);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x000c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500060);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x080C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x2001E924);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100060);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x080c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++
++ tmp = 3 << 9;
++ break;
++
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM43428:
++ /* LCNXN */
++ /* PLL Settings for spur avoidance on/off mode,
++ no on2 support for 43228A0 */
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x01100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x040C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03140A08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00333333);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x202C2820);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x040c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++ tmp = 1 << 10;
++ break;
++ default:
++ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++ bus->chipinfo.id);
++ break;
+ }
+
+- return bcma_pmu_get_clockcontrol(cc);
++ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
++ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
+ }
++EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -0,0 +1,165 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon serial flash interface
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static struct resource bcma_sflash_resource = {
++ .name = "bcma_sflash",
++ .start = BCMA_SOC_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device bcma_sflash_dev = {
++ .name = "bcma_sflash",
++ .resource = &bcma_sflash_resource,
++ .num_resources = 1,
++};
++
++struct bcma_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
++{
++ int i;
++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
++ BCMA_CC_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
++ BCMA_CC_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
++}
++
++/* Initialize serial flash access */
++int bcma_sflash_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ struct bcma_sflash *sflash = &cc->sflash;
++ struct bcma_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
++
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = bcma_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = bcma_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case BCMA_CC_FLASHT_ATSER:
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
++
++ for (e = bcma_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ bcma_err(bus, "Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = BCMA_SOC_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
++ e->name, sflash->size / 1024, sflash->blocksize,
++ sflash->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
++ sflash->size;
++ bcma_sflash_dev.dev.platform_data = sflash;
++
++ return 0;
++}
+--- /dev/null
++++ b/drivers/bcma/driver_gmac_cmn.c
+@@ -0,0 +1,14 @@
++/*
++ * Broadcom specific AMBA
++ * GBIT MAC COMMON Core
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
++{
++ mutex_init(&gc->phy_mutex);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,98 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
++{
++ return container_of(chip, struct bcma_drv_cc, gpio);
++}
++
++static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ return !!bcma_chipco_gpio_in(cc, 1 << gpio);
++}
++
++static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
++ return 0;
++}
++
++static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_control(cc, 1 << gpio, 0);
++ /* clear pulldown */
++ bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
++ /* Set pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
++
++ return 0;
++}
++
++static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ /* clear pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
++}
++
++int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ struct gpio_chip *chip = &cc->gpio;
++
++ chip->label = "bcma_gpio";
++ chip->owner = THIS_MODULE;
++ chip->request = bcma_gpio_request;
++ chip->free = bcma_gpio_free;
++ chip->get = bcma_gpio_get_value;
++ chip->set = bcma_gpio_set_value;
++ chip->direction_input = bcma_gpio_direction_input;
++ chip->direction_output = bcma_gpio_direction_output;
++ chip->ngpio = 16;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -22,15 +22,15 @@
+ /* The 47162a0 hangs when reading MIPS DMP registers registers */
+ static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+ {
+- return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
+- dev->id.id == BCMA_CORE_MIPS_74K;
++ return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 &&
++ dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K;
+ }
+
+ /* The 5357b0 hangs when reading USB20H DMP registers */
+ static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
+ {
+- return (dev->bus->chipinfo.id == 0x5357 ||
+- dev->bus->chipinfo.id == 0x4749) &&
++ return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) &&
+ dev->bus->chipinfo.pkg == 11 &&
+ dev->id.id == BCMA_CORE_USB20_HOST;
+ }
+@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+ return dev->core_index;
+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+- return flag & 0x1F;
++ if (flag)
++ return flag & 0x1F;
++ else
++ return 0x3f;
+ }
+
+ /* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+ */
+ unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ unsigned int irq;
+
+ irqflag = bcma_core_mips_irqflag(dev);
++ if (irqflag == 0x3f)
++ return 6;
-+/* driver_pci.c */
-+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+- for (irq = 1; irq <= 4; irq++)
++ for (irq = 0; irq <= 4; irq++)
+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ (1 << irqflag))
+ return irq;
+
+- return 0;
++ return 5;
+ }
+ EXPORT_SYMBOL(bcma_core_mips_irq);
+
+@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+ ~(1 << irqflag));
+- else
+- bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++ else if (oldirq != 5)
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
+
+ /* assign the new one */
+ if (irq == 0) {
+@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ (1 << irqflag));
+ } else {
+- u32 oldirqflag = bcma_read32(mdev,
+- BCMA_MIPS_MIPS74K_INTMASK(irq));
+- if (oldirqflag) {
++ u32 irqinitmask = bcma_read32(mdev,
++ BCMA_MIPS_MIPS74K_INTMASK(irq));
++ if (irqinitmask) {
+ struct bcma_device *core;
+
+ /* backplane irq line is in use, find out who uses
+ * it and set user to irq 0
+ */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ if ((1 << bcma_core_mips_irqflag(core)) ==
+- oldirqflag) {
++ irqinitmask) {
+ bcma_core_mips_set_irq(core, 0);
+ break;
+ }
+@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
+ 1 << irqflag);
+ }
+
+- pr_info("set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.id, oldirq + 2, irq + 2);
++ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
++}
+
- #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
--void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
-+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
-+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
- #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++ u16 coreid, u8 unit)
++{
++ struct bcma_device *core;
++
++ core = bcma_find_core_unit(bus, coreid, unit);
++ if (!core) {
++ bcma_warn(bus,
++ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++ coreid, unit);
++ return;
++ }
++
++ bcma_core_mips_set_irq(core, irq);
+ }
- #endif
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru
- min_msk = 0x200D;
- max_msk = 0xFFFF;
+ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ for (i = 0; i <= 6; i++)
+ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ printk("\n");
+@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
+ {
+ struct bcma_device *core;
+
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+ }
+ }
+@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ struct bcma_bus *bus = mcore->core->bus;
+
+ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
+- return bcma_pmu_get_clockcpu(&bus->drv_cc);
++ return bcma_pmu_get_cpu_clock(&bus->drv_cc);
+
+- pr_err("No PMU available, need this to get the cpu clock\n");
++ bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
+ return 0;
+ }
+ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus = mcore->core->bus;
++ struct bcma_drv_cc *cc = &bus->drv_cc;
+
+- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ case BCMA_CC_FLASHT_ATSER:
+- pr_err("Serial flash not supported.\n");
++ bcma_debug(bus, "Found serial flash\n");
++ bcma_sflash_init(cc);
break;
-+ case 0x4331:
- case 43224:
- case 43225:
+ case BCMA_CC_FLASHT_PARA:
+- pr_info("found parallel flash.\n");
+- bus->drv_cc.pflash.window = 0x1c000000;
+- bus->drv_cc.pflash.window_size = 0x02000000;
++ bcma_debug(bus, "Found parallel flash\n");
++ cc->pflash.present = true;
++ cc->pflash.window = BCMA_SOC_FLASH2;
++ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
+
+- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
+ BCMA_CC_FLASH_CFG_DS) == 0)
+- bus->drv_cc.pflash.buswidth = 1;
++ cc->pflash.buswidth = 1;
+ else
+- bus->drv_cc.pflash.buswidth = 2;
++ cc->pflash.buswidth = 2;
break;
+ default:
+- pr_err("flash not supported.\n");
++ bcma_err(bus, "Flash type not supported\n");
++ }
++
++ if (cc->core->id.rev == 38 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
++ if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
++ bcma_debug(bus, "Found NAND flash\n");
++ bcma_nflash_init(cc);
++ }
+ }
+ }
+
++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ if (mcore->early_setup_done)
++ return;
++
++ bcma_chipco_serial_init(&bus->drv_cc);
++ bcma_core_mips_flash_detect(mcore);
++
++ mcore->early_setup_done = true;
++}
++
+ void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus;
+ struct bcma_device *core;
+ bus = mcore->core->bus;
+
+- pr_info("Initializing MIPS core...\n");
++ if (mcore->setup_done)
++ return;
++
++ bcma_debug(bus, "Initializing MIPS core...\n");
+
+- if (!mcore->setup_done)
+- mcore->assigned_irqs = 1;
++ bcma_core_mips_early_init(mcore);
+
+- /* Assign IRQs to all cores on the bus */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
+- int mips_irq;
+- if (core->irq)
+- continue;
+-
+- mips_irq = bcma_core_mips_irq(core);
+- if (mips_irq > 4)
+- core->irq = 0;
+- else
+- core->irq = mips_irq + 2;
+- if (core->irq > 5)
+- continue;
+- switch (core->id.id) {
+- case BCMA_CORE_PCI:
+- case BCMA_CORE_PCIE:
+- case BCMA_CORE_ETHERNET:
+- case BCMA_CORE_ETHERNET_GBIT:
+- case BCMA_CORE_MAC_GBIT:
+- case BCMA_CORE_80211:
+- case BCMA_CORE_USB20_HOST:
+- /* These devices get their own IRQ line if available,
+- * the rest goes on IRQ0
+- */
+- if (mcore->assigned_irqs <= 4)
+- bcma_core_mips_set_irq(core,
+- mcore->assigned_irqs++);
+- break;
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM53572:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM4706:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++ 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++ 0);
++ break;
++ default:
++ list_for_each_entry(core, &bus->cores, list) {
++ core->irq = bcma_core_mips_irq(core) + 2;
+ }
++ bcma_err(bus,
++ "Unknown device (0x%x) found, can not configure IRQs\n",
++ bus->chipinfo.id);
+ }
+- pr_info("IRQ reconfiguration done\n");
++ bcma_debug(bus, "IRQ reconfiguration done\n");
+ bcma_core_mips_dump_irq(bus);
+
+- if (mcore->setup_done)
+- return;
+-
+- bcma_chipco_serial_init(&bus->drv_cc);
+- bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+ }
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -2,8 +2,9 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -16,40 +17,41 @@
+@@ -16,120 +17,124 @@
* R/W ops.
**************************************************/
+ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA);
}
- #if 0
+-#if 0
static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
{
- pcicore_write32(pc, 0x130, address);
+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR);
+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
}
- #endif
+-#endif
static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
{
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
-@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc
+ }
static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
{
+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
break;
}
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
}
/**************************************************
-@@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct
+@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
{
+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL,
+ BCMA_CORE_PCI_SERDES_PLL_CTRL,
+ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
++}
++
++static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
++{
++ struct bcma_device *core = pc->core;
++ u16 val16, core_index;
++ uint regoff;
++
++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
++ core_index = (u16)core->core_index;
++
++ val16 = pcicore_read16(pc, regoff);
++ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
++ != core_index) {
++ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
++ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
++ pcicore_write16(pc, regoff, val16);
++ }
++}
++
++/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
++/* Needs to happen when coming out of 'standby'/'hibernate' */
++static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
++{
++ u16 val16;
++ uint regoff;
++
++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG);
++
++ val16 = pcicore_read16(pc, regoff);
++
++ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) {
++ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST;
++ pcicore_write16(pc, regoff, val16);
++ }
}
/**************************************************
-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
{
++ bcma_core_pci_fixcfg(pc);
bcma_pcicore_serdes_workaround(pc);
++ bcma_core_pci_config_fixup(pc);
}
-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
}
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+ bool enable)
+ {
+- struct pci_dev *pdev = pc->core->bus->host_pci;
++ struct pci_dev *pdev;
+ u32 coremask, tmp;
+ int err = 0;
+
+- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
++ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
+
++ pdev = pc->core->bus->host_pci;
++
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+@@ -236,3 +261,17 @@ out:
+ return err;
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
++
++void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
++{
++ u32 w;
++
++ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
++ if (extend)
++ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND;
++ else
++ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND;
++ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
++ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
++}
++EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,588 @@
+@@ -2,13 +2,600 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
+ chipid_top != 0x5300)
+ return false;
+
-+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-+ pr_info("This PCI core is disabled and not working\n");
-+ return false;
-+ }
-+
+ bcma_core_enable(pc->core, 0);
+
+ return !mips_busprobe32(tmp, pc->core->io_addr);
+ if (unlikely(!addr))
+ goto out;
+ err = -ENOMEM;
-+ mmio = ioremap_nocache(addr, len);
++ mmio = ioremap_nocache(addr, sizeof(val));
+ if (!mmio)
+ goto out;
+
+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
+ addr |= (off & 0xfc);
-+ mmio = ioremap_nocache(addr, len);
++ mmio = ioremap_nocache(addr, sizeof(val));
+ if (!mmio)
+ goto out;
+ }
+ if (unlikely(!addr))
+ goto out;
+ err = -ENOMEM;
-+ mmio = ioremap_nocache(addr, len);
++ mmio = ioremap_nocache(addr, sizeof(val));
+ if (!mmio)
+ goto out;
+
+ } else {
+ writel(val, mmio);
+
-+ if (chipid == 0x4716 || chipid == 0x4748)
++ if (chipid == BCMA_CHIP_ID_BCM4716 ||
++ chipid == BCMA_CHIP_ID_BCM4748)
+ readl(mmio);
+ }
+
+ */
+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc)
+{
++ struct bcma_bus *bus = pc->core->bus;
+ u8 cap_ptr, root_ctrl, root_cap, dev;
+ u16 val16;
+ int i;
+ udelay(10);
+ }
+ if (val16 == 0x1)
-+ pr_err("PCI: Broken device in slot %d\n", dev);
++ bcma_err(bus, "PCI: Broken device in slot %d\n",
++ dev);
+ }
+ }
+}
+ u32 pci_membase_1G;
+ unsigned long io_map_base;
+
-+ pr_info("PCIEcore in host mode found\n");
++ bcma_info(bus, "PCIEcore in host mode found\n");
++
++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
++ bcma_info(bus, "This PCIE core is disabled and not working\n");
++ return;
++ }
+
+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+ if (!pc_host) {
-+ pr_err("can not allocate memory");
++ bcma_err(bus, "can not allocate memory");
+ return;
+ }
+
+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+ /* Reset RC */
-+ udelay(3000);
++ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-+ udelay(1000);
++ usleep_range(1000, 2000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
+ * as mips can't generate 64-bit address on the
+ * backplane.
+ */
-+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) {
+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM);
-+ } else if (bus->chipinfo.id == 0x5300) {
++ } else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM;
+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF;
+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST;
+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x100;
++ pc_host->io_resource.end = 0x47F;
+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ tmp | BCMA_SOC_PCI_MEM);
+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x480;
++ pc_host->io_resource.end = 0x7FF;
+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ * before issuing configuration requests to PCI Express
+ * devices.
+ */
-+ udelay(100000);
++ msleep(100);
+
+ bcma_core_pci_enable_crs(pc);
+
+ /* Ok, ready to run, register it to the system.
+ * The following needs change, if we want to port hostmode
+ * to non-MIPS platform. */
-+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM,
-+ 0x04000000);
++ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start,
++ resource_size(&pc_host->mem_resource));
+ pc_host->pci_controller.io_map_base = io_map_base;
+ set_io_port_base(pc_host->pci_controller.io_map_base);
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
-+ mdelay(10);
++ usleep_range(10000, 15000);
+ register_pci_controller(&pc_host->pci_controller);
+ return;
+}
+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
+{
+ struct resource *res;
-+ int pos;
++ int pos, err;
+
+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+ /* This is not a device on the PCI-core bridge. */
+
+ for (pos = 0; pos < 6; pos++) {
+ res = &dev->resource[pos];
-+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM))
-+ pci_assign_resource(dev, pos);
++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
++ err = pci_assign_resource(dev, pos);
++ if (err)
++ pr_err("PCI: Problem fixing up the addresses on %s\n",
++ pci_name(dev));
++ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
-@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci
+@@ -18,7 +18,7 @@ static void bcma_host_pci_switch_core(st
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+ core->wrap);
+ core->bus->mapped_core = core;
+- pr_debug("Switched to core: 0x%X\n", core->id.id);
++ bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id);
+ }
+
+ /* Provides access to the requested core. Returns base offset that has to be
+@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
+ }
+
+ #ifdef CONFIG_BCMA_BLOCKIO
+-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
+ }
+ }
+
+-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_write(struct bcma_device *core,
++ const void *buffer, size_t count,
++ u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
+ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_pci_ops = {
++static const struct bcma_host_ops bcma_host_pci_ops = {
+ .read8 = bcma_host_pci_read8,
+ .read16 = bcma_host_pci_read16,
+ .read32 = bcma_host_pci_read32,
+@@ -154,8 +155,8 @@ const struct bcma_host_ops bcma_host_pci
.awrite32 = bcma_host_pci_awrite32,
};
{
struct bcma_bus *bus;
int err = -ENOMEM;
+@@ -188,7 +189,7 @@ static int bcma_host_pci_probe(struct pc
+
+ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
+ if (!pci_is_pcie(dev))
+- pr_err("PCI card detected, report problems.\n");
++ bcma_err(bus, "PCI card detected, report problems.\n");
+
+ /* Map MMIO */
+ err = -ENOMEM;
+@@ -201,6 +202,9 @@ static int bcma_host_pci_probe(struct pc
+ bus->hosttype = BCMA_HOSTTYPE_PCI;
+ bus->ops = &bcma_host_pci_ops;
+
++ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor;
++ bus->boardinfo.type = bus->host_pci->subsystem_device;
++
+ /* Register */
+ err = bcma_bus_register(bus);
+ if (err)
+@@ -222,7 +226,7 @@ err_kfree_bus:
+ return err;
+ }
+
+-static void bcma_host_pci_remove(struct pci_dev *dev)
++static void __devexit bcma_host_pci_remove(struct pci_dev *dev)
+ {
+ struct bcma_bus *bus = pci_get_drvdata(dev);
+
+@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
+ pci_set_drvdata(dev, NULL);
+ }
+
+-#ifdef CONFIG_PM
++#ifdef CONFIG_PM_SLEEP
+ static int bcma_host_pci_suspend(struct device *dev)
+ {
+ struct pci_dev *pdev = to_pci_dev(dev);
+@@ -257,17 +261,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+ bcma_host_pci_resume);
+ #define BCMA_PM_OPS (&bcma_pm_ops)
+
+-#else /* CONFIG_PM */
++#else /* CONFIG_PM_SLEEP */
+
+ #define BCMA_PM_OPS NULL
+
+-#endif /* CONFIG_PM */
++#endif /* CONFIG_PM_SLEEP */
+
+ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
+@@ -277,7 +284,7 @@ static struct pci_driver bcma_pci_bridge
+ .name = "bcma-pci-bridge",
+ .id_table = bcma_pci_bridge_tbl,
+ .probe = bcma_host_pci_probe,
+- .remove = bcma_host_pci_remove,
++ .remove = __devexit_p(bcma_host_pci_remove),
+ .driver.pm = BCMA_PM_OPS,
+ };
+
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
+ writel(value, core->io_wrap + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_soc_ops = {
++static const struct bcma_host_ops bcma_host_soc_ops = {
+ .read8 = bcma_host_soc_read8,
+ .read16 = bcma_host_soc_read16,
+ .read32 = bcma_host_soc_read32,
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -13,6 +13,12 @@
+@@ -7,12 +7,19 @@
+
+ #include "bcma_private.h"
+ #include <linux/module.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+
MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
MODULE_LICENSE("GPL");
static int bcma_bus_match(struct device *dev, struct device_driver *drv);
static int bcma_device_probe(struct device *dev);
static int bcma_device_remove(struct device *dev);
-@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = {
+@@ -55,7 +62,14 @@ static struct bus_type bcma_bus_type = {
.dev_attrs = bcma_device_attrs,
};
-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
++static u16 bcma_cc_core_id(struct bcma_bus *bus)
++{
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ return BCMA_CORE_4706_CHIPCOMMON;
++ return BCMA_CORE_CHIPCOMMON;
++}
++
+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
{
struct bcma_device *core;
-@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +79,19 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
+EXPORT_SYMBOL_GPL(bcma_find_core);
++
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->id.id == coreid && core->core_unit == unit)
++ return core;
++ }
++ return NULL;
++}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +111,18 @@ static int bcma_register_cores(struct bc
+ list_for_each_entry(core, &bus->cores, list) {
+ /* We support that cores ourself */
+ switch (core->id.id) {
++ case BCMA_CORE_4706_CHIPCOMMON:
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
+ case BCMA_CORE_MIPS_74K:
++ case BCMA_CORE_4706_MAC_GBIT_COMMON:
+ continue;
+ }
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct
+@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
+
+ err = device_register(&core->dev);
+ if (err) {
+- pr_err("Could not register dev for core 0x%03X\n",
+- core->id.id);
++ bcma_err(bus,
++ "Could not register dev for core 0x%03X\n",
++ core->id.id);
+ continue;
+ }
+ core->dev_registered = true;
+ dev_id++;
+ }
+
++#ifdef CONFIG_BCMA_SFLASH
++ if (bus->drv_cc.sflash.present) {
++ err = platform_device_register(&bcma_sflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering serial flash\n");
++ }
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++ if (bus->drv_cc.nflash.present) {
++ err = platform_device_register(&bcma_nflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering NAND flash\n");
++ }
++#endif
++ err = bcma_gpio_init(&bus->drv_cc);
++ if (err == -ENOTSUPP)
++ bcma_debug(bus, "GPIO driver not activated\n");
++ else if (err)
++ bcma_err(bus, "Error registering GPIO driver: %i\n", err);
++
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ err = bcma_chipco_watchdog_register(&bus->drv_cc);
++ if (err)
++ bcma_err(bus, "Error registering watchdog driver\n");
++ }
++
+ return 0;
+ }
+
+ static void bcma_unregister_cores(struct bcma_bus *bus)
+ {
+- struct bcma_device *core;
++ struct bcma_device *core, *tmp;
+
+- list_for_each_entry(core, &bus->cores, list) {
++ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
++ list_del(&core->list);
+ if (core->dev_registered)
+ device_unregister(&core->dev);
}
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
++ platform_device_unregister(bus->drv_cc.watchdog);
}
-int bcma_bus_register(struct bcma_bus *bus)
/* Scan for devices (cores) */
err = bcma_bus_scan(bus);
if (err) {
+- pr_err("Failed to scan: %d\n", err);
++ bcma_err(bus, "Failed to scan: %d\n", err);
+ return -1;
+ }
+
++ /* Early init CC core */
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
++ }
++
++ /* Try to get SPROM */
++ err = bcma_sprom_get(bus);
++ if (err == -ENOENT) {
++ bcma_err(bus, "No SPROM available\n");
++ } else if (err)
++ bcma_err(bus, "Failed to get SPROM: %d\n", err);
++
+ /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
+ }
+
+ /* Init PCIE core */
+- core = bcma_find_core(bus, BCMA_CORE_PCIE);
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
+ if (core) {
+- bus->drv_pci.core = core;
+- bcma_core_pci_init(&bus->drv_pci);
++ bus->drv_pci[0].core = core;
++ bcma_core_pci_init(&bus->drv_pci[0]);
+ }
+
+- /* Try to get SPROM */
+- err = bcma_sprom_get(bus);
+- if (err == -ENOENT) {
+- pr_err("No SPROM available\n");
+- } else if (err)
+- pr_err("Failed to get SPROM: %d\n", err);
++ /* Init PCIE core */
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
++ if (core) {
++ bus->drv_pci[1].core = core;
++ bcma_core_pci_init(&bus->drv_pci[1]);
++ }
++
++ /* Init GBIT MAC COMMON core */
++ core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++ if (core) {
++ bus->drv_gmac_cmn.core = core;
++ bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
++ }
+
+ /* Register found cores */
+ bcma_register_cores(bus);
+
+- pr_info("Bus registered\n");
++ bcma_info(bus, "Bus registered\n");
+
+ return 0;
+ }
+
+ void bcma_bus_unregister(struct bcma_bus *bus)
+ {
++ struct bcma_device *cores[3];
++
++ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
++ cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++
+ bcma_unregister_cores(bus);
++
++ kfree(cores[2]);
++ kfree(cores[1]);
++ kfree(cores[0]);
+ }
+
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
+ bcma_init_bus(bus);
+
+ match.manuf = BCMA_MANUF_BCM;
+- match.id = BCMA_CORE_CHIPCOMMON;
++ match.id = bcma_cc_core_id(bus);
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for chip common core */
+ err = bcma_bus_scan_early(bus, &match, core_cc);
+ if (err) {
+- pr_err("Failed to scan for common core: %d\n", err);
++ bcma_err(bus, "Failed to scan for common core: %d\n", err);
+ return -1;
+ }
+
+@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
+ /* Scan for mips core */
+ err = bcma_bus_scan_early(bus, &match, core_mips);
+ if (err) {
+- pr_err("Failed to scan for mips core: %d\n", err);
++ bcma_err(bus, "Failed to scan for mips core: %d\n", err);
+ return -1;
+ }
+
+- /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ /* Early init CC core */
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ if (core) {
+ bus->drv_cc.core = core;
+- bcma_core_chipcommon_init(&bus->drv_cc);
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
+ }
+
+- /* Init MIPS core */
++ /* Early init MIPS core */
+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ if (core) {
+ bus->drv_mips.core = core;
+- bcma_core_mips_init(&bus->drv_mips);
++ bcma_core_mips_early_init(&bus->drv_mips);
+ }
+
+- pr_info("Early bus registered\n");
++ bcma_info(bus, "Early bus registered\n");
+
+ return 0;
+ }
+@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+ struct bcma_device *core;
+
+ /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+- if (core) {
++ if (bus->drv_cc.core) {
+ bus->drv_cc.setup_done = false;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor
+@@ -19,15 +19,27 @@ struct bcma_device_id_name {
+ u16 id;
+ const char *name;
+ };
+-struct bcma_device_id_name bcma_device_names[] = {
++
++static const struct bcma_device_id_name bcma_arm_device_names[] = {
++ { BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" },
++ { BCMA_CORE_ARM_1176, "ARM 1176" },
++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
++ { BCMA_CORE_ARM_CM3, "ARM CM3" },
++};
++
++static const struct bcma_device_id_name bcma_bcm_device_names[] = {
+ { BCMA_CORE_OOB_ROUTER, "OOB Router" },
++ { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
++ { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
++ { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
++ { BCMA_CORE_AMEMC, "AMEMC (DDR)" },
++ { BCMA_CORE_ALTA, "ALTA (I2S)" },
+ { BCMA_CORE_INVALID, "Invalid" },
+ { BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+ { BCMA_CORE_ILINE20, "ILine 20" },
+ { BCMA_CORE_SRAM, "SRAM" },
+ { BCMA_CORE_SDRAM, "SDRAM" },
+ { BCMA_CORE_PCI, "PCI" },
+- { BCMA_CORE_MIPS, "MIPS" },
+ { BCMA_CORE_ETHERNET, "Fast Ethernet" },
+ { BCMA_CORE_V90, "V90" },
+ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_PHY_A, "PHY A" },
+ { BCMA_CORE_PHY_B, "PHY B" },
+ { BCMA_CORE_PHY_G, "PHY G" },
+- { BCMA_CORE_MIPS_3302, "MIPS 3302" },
+ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_PHY_N, "PHY N" },
+ { BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+- { BCMA_CORE_ARM_1176, "ARM 1176" },
+- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+ { BCMA_CORE_PHY_LP, "PHY LP" },
+ { BCMA_CORE_PMU, "PMU" },
+ { BCMA_CORE_PHY_SSN, "PHY SSN" },
+ { BCMA_CORE_SDIO_DEV, "SDIO Device" },
+- { BCMA_CORE_ARM_CM3, "ARM CM3" },
+ { BCMA_CORE_PHY_HT, "PHY HT" },
+- { BCMA_CORE_MIPS_74K, "MIPS 74K" },
+ { BCMA_CORE_MAC_GBIT, "GBit MAC" },
+ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_SHIM, "SHIM" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+-const char *bcma_device_name(struct bcma_device_id *id)
++
++static const struct bcma_device_id_name bcma_mips_device_names[] = {
++ { BCMA_CORE_MIPS, "MIPS" },
++ { BCMA_CORE_MIPS_3302, "MIPS 3302" },
++ { BCMA_CORE_MIPS_74K, "MIPS 74K" },
++};
++
++static const char *bcma_device_name(const struct bcma_device_id *id)
+ {
+- int i;
++ const struct bcma_device_id_name *names;
++ int size, i;
+
+- if (id->manuf == BCMA_MANUF_BCM) {
+- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+- if (bcma_device_names[i].id == id->id)
+- return bcma_device_names[i].name;
+- }
++ /* search manufacturer specific names */
++ switch (id->manuf) {
++ case BCMA_MANUF_ARM:
++ names = bcma_arm_device_names;
++ size = ARRAY_SIZE(bcma_arm_device_names);
++ break;
++ case BCMA_MANUF_BCM:
++ names = bcma_bcm_device_names;
++ size = ARRAY_SIZE(bcma_bcm_device_names);
++ break;
++ case BCMA_MANUF_MIPS:
++ names = bcma_mips_device_names;
++ size = ARRAY_SIZE(bcma_mips_device_names);
++ break;
++ default:
++ return "UNKNOWN";
+ }
++
++ for (i = 0; i < size; i++) {
++ if (names[i].id == id->id)
++ return names[i].name;
++ }
++
+ return "UNKNOWN";
+ }
+
+@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
+ if (core->id.id == coreid)
+ return core;
+ }
-+ return NULL;
-+}
-+
- static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
- struct bcma_device_id *match, int core_num,
- struct bcma_device *core)
-@@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm
++ return NULL;
++}
++
+ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+ struct bcma_device_id *match, int core_num,
+ struct bcma_device *core)
+@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+- /* we could save addrl of the router
+- if (cid == BCMA_CORE_OOB_ROUTER)
+- */
+- bcma_erom_skip_component(bus, eromptr);
+- return -ENXIO;
++ /* Some specific cores don't need wrappers */
++ switch (core->id.id) {
++ case BCMA_CORE_4706_MAC_GBIT_COMMON:
++ /* Not used yet: case BCMA_CORE_OOB_ROUTER: */
++ break;
++ default:
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENXIO;
++ }
+ }
+
+ if (bcma_erom_is_bridge(bus, eromptr)) {
+@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+ return -EILSEQ;
+ }
+
++ /* First Slave Address Descriptor should be port 0:
++ * the main register space for the core
++ */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
++ if (tmp <= 0) {
++ /* Try again to see if it is a bridge */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_BRIDGE, 0);
++ if (tmp <= 0) {
++ return -EILSEQ;
++ } else {
++ bcma_info(bus, "Bridge found\n");
++ return -ENXIO;
++ }
++ }
++ core->addr = tmp;
++
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+ break;
+ } else {
+ if (i == 0 && j == 0)
+- core->addr = tmp;
++ core->addr1 = tmp;
+ }
+ }
+ }
+@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
if (bus->init_done)
return;
-@@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
-+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
-+ chipinfo->id, chipinfo->rev, chipinfo->pkg);
++ bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ chipinfo->id, chipinfo->rev, chipinfo->pkg);
+
bus->init_done = true;
}
-@@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,9 +460,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
+ struct bcma_device *other_core;
struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
- if (!core)
- return -ENOMEM;
-@@ -414,6 +430,8 @@ int bcma_bus_scan(struct bcma_bus *bus)
+- if (!core)
+- return -ENOMEM;
++ if (!core) {
++ err = -ENOMEM;
++ goto out;
++ }
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+@@ -409,25 +480,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ } else if (err == -ESPIPE) {
+ break;
+ }
+- return err;
++ goto out;
+ }
core->core_index = core_num++;
bus->nr_cores++;
+ other_core = bcma_find_core_reverse(bus, core->id.id);
+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
- pr_info("Core %d found: %s "
- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- pr_info("Core %d found: %s "
+- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- core->core_index, bcma_device_name(&core->id),
+- core->id.manuf, core->id.id, core->id.rev,
+- core->id.class);
++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ core->core_index, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
+
+- list_add(&core->list, &bus->cores);
++ list_add_tail(&core->list, &bus->cores);
+ }
+
++ err = 0;
++out:
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
+- return 0;
++ return err;
+ }
+
+ int __init bcma_bus_scan_early(struct bcma_bus *bus,
+@@ -467,21 +541,21 @@ int __init bcma_bus_scan_early(struct bc
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+- return err;
++ goto out;
+
+ core->core_index = core_num++;
+ bus->nr_cores++;
+- pr_info("Core %d found: %s "
+- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- core->core_index, bcma_device_name(&core->id),
+- core->id.manuf, core->id.id, core->id.rev,
+- core->id.class);
++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ core->core_index, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
+
+- list_add(&core->list, &bus->cores);
++ list_add_tail(&core->list, &bus->cores);
+ err = 0;
+ break;
+ }
+
++out:
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
+--- a/drivers/bcma/scan.h
++++ b/drivers/bcma/scan.h
+@@ -27,7 +27,7 @@
+ #define SCAN_CIB_NMW 0x0007C000
+ #define SCAN_CIB_NMW_SHIFT 14
+ #define SCAN_CIB_NSW 0x00F80000
+-#define SCAN_CIB_NSW_SHIFT 17
++#define SCAN_CIB_NSW_SHIFT 19
+ #define SCAN_CIB_REV 0xFF000000
+ #define SCAN_CIB_REV_SHIFT 24
+
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -2,6 +2,8 @@
+ if (err)
+ goto fail;
+
-+ pr_debug("Using SPROM revision %d provided by"
-+ " platform.\n", bus->sprom.revision);
++ bcma_debug(bus, "Using SPROM revision %d provided by platform.\n",
++ bus->sprom.revision);
+ return 0;
+fail:
-+ pr_warn("Using fallback SPROM failed (err %d)\n", err);
++ bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
+ return err;
+}
/**************************************************
* R/W ops.
-@@ -124,10 +176,21 @@ static int bcma_sprom_valid(const u16 *s
+@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
* SPROM extraction.
**************************************************/
+
+#define SPEX(_field, _offset, _mask, _shift) \
+ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift))
++
++#define SPEX32(_field, _offset, _mask, _shift) \
++ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \
++ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift))
++
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
++ do { \
++ SPEX(_field[0], _offset + 0, _mask, _shift); \
++ SPEX(_field[1], _offset + 2, _mask, _shift); \
++ SPEX(_field[2], _offset + 4, _mask, _shift); \
++ SPEX(_field[3], _offset + 6, _mask, _shift); \
++ SPEX(_field[4], _offset + 8, _mask, _shift); \
++ SPEX(_field[5], _offset + 10, _mask, _shift); \
++ SPEX(_field[6], _offset + 12, _mask, _shift); \
++ SPEX(_field[7], _offset + 14, _mask, _shift); \
++ } while (0)
+
static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
{
bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
SSB_SPROM_REVISION_REV;
-@@ -137,85 +200,229 @@ static void bcma_sprom_extract_r8(struct
+@@ -137,107 +216,390 @@ static void bcma_sprom_extract_r8(struct
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1,
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0);
+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0);
+
-+ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0);
++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
+ SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
+ SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT,
+ SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
++ SSB_SPROM8_ANTAVAIL_A_SHIFT);
++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
++ SSB_SPROM8_ANTAVAIL_BG_SHIFT);
++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
++ SSB_SPROM8_ITSSI_BG_SHIFT);
++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
++ SSB_SPROM8_ITSSI_A_SHIFT);
++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++ SSB_SPROM8_MAXP_AL_SHIFT);
++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
++ SSB_SPROM8_GPIOA_P1_SHIFT);
++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
++ SSB_SPROM8_GPIOB_P3_SHIFT);
++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++ SSB_SPROM8_TRI5G_SHIFT);
++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++ SSB_SPROM8_TRI5GH_SHIFT);
++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G,
++ SSB_SPROM8_RXPO2G_SHIFT);
++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++ SSB_SPROM8_RXPO5G_SHIFT);
++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++ SSB_SPROM8_RSSISMC2G_SHIFT);
++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++ SSB_SPROM8_RSSISAV2G_SHIFT);
++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++ SSB_SPROM8_BXA2G_SHIFT);
++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++ SSB_SPROM8_RSSISMC5G_SHIFT);
++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++ SSB_SPROM8_RSSISAV5G_SHIFT);
++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++ SSB_SPROM8_BXA5G_SHIFT);
++
++ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0);
++ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0);
++ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0);
++ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0);
++ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0);
++ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0);
++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0);
++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0);
++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0);
++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0);
++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0);
++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0);
++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0);
++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0);
++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0);
++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0);
++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0);
++
++ /* Extract the antenna gain values. */
++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
++
++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++ SSB_SPROM8_LEDDC_ON_SHIFT);
++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++ SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++ SSB_SPROM8_THERMAL_TRESH_SHIFT);
++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_PHYCAL,
++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
+}
+
+/*
+ /* older chipcommon revisions use chip status register */
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
-+ case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT;
+ break;
+
-+ case 0x4331:
++ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
+
+
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
-+ case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT;
+ break;
+
-+ case 0x4331:
++ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+
-+ case 43224:
-+ case 43225:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM43428:
++ present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
++ break;
+ default:
+ present = false;
+ break;
- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
- return -ENOENT;
+ if (!bcma_sprom_ext_available(bus)) {
++ bool sprom_onchip;
++
+ /*
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ * is present.
+ */
-+ if (bcma_sprom_onchip_available(bus)) {
++ sprom_onchip = bcma_sprom_onchip_available(bus);
++ if (sprom_onchip) {
+ /* determine offset */
+ offset = bcma_sprom_onchip_offset(bus);
+ }
-+ if (!offset) {
++ if (!offset || !sprom_onchip) {
+ /*
+ * Maybe there is no SPROM on the device?
+ * Now we ask the arch code if there is some sprom
sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
-@@ -225,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
- if (bus->chipinfo.id == 0x4331)
+ if (!sprom)
+ return -ENOMEM;
+
+- if (bus->chipinfo.id == 0x4331)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
-+ pr_debug("SPROM offset 0x%x\n", offset);
++ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
- if (bus->chipinfo.id == 0x4331)
+- if (bus->chipinfo.id == 0x4331)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+ err = bcma_sprom_valid(sprom);
+- if (err)
++ if (err) {
++ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+ goto out;
++ }
+
+ bcma_sprom_extract_r8(bus, sprom);
+
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -136,6 +136,7 @@ struct bcma_device {
+@@ -7,9 +7,10 @@
+ #include <linux/bcma/bcma_driver_chipcommon.h>
+ #include <linux/bcma/bcma_driver_pci.h>
+ #include <linux/bcma/bcma_driver_mips.h>
++#include <linux/bcma/bcma_driver_gmac_cmn.h>
+ #include <linux/ssb/ssb.h> /* SPROM sharing */
+
+-#include "bcma_regs.h"
++#include <linux/bcma/bcma_regs.h>
+
+ struct bcma_device;
+ struct bcma_bus;
+@@ -26,6 +27,11 @@ struct bcma_chipinfo {
+ u8 pkg;
+ };
+
++struct bcma_boardinfo {
++ u16 vendor;
++ u16 type;
++};
++
+ enum bcma_clkmode {
+ BCMA_CLKMODE_FAST,
+ BCMA_CLKMODE_DYNAMIC,
+@@ -65,6 +71,13 @@ struct bcma_host_ops {
+
+ /* Core-ID values. */
+ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
++#define BCMA_CORE_4706_CHIPCOMMON 0x500
++#define BCMA_CORE_4706_SOC_RAM 0x50E
++#define BCMA_CORE_4706_MAC_GBIT 0x52D
++#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */
++#define BCMA_CORE_ALTA 0x534 /* I2S core */
++#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC
++#define BCMA_CORE_DDR23_PHY 0x5DD
+ #define BCMA_CORE_INVALID 0x700
+ #define BCMA_CORE_CHIPCOMMON 0x800
+ #define BCMA_CORE_ILINE20 0x801
+@@ -125,6 +138,41 @@ struct bcma_host_ops {
+
+ #define BCMA_MAX_NR_CORES 16
+
++/* Chip IDs of PCIe devices */
++#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43224 43224
++#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
++#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
++#define BCMA_CHIP_ID_BCM43225 43225
++#define BCMA_CHIP_ID_BCM43227 43227
++#define BCMA_CHIP_ID_BCM43228 43228
++#define BCMA_CHIP_ID_BCM43421 43421
++#define BCMA_CHIP_ID_BCM43428 43428
++#define BCMA_CHIP_ID_BCM43431 43431
++#define BCMA_CHIP_ID_BCM43460 43460
++#define BCMA_CHIP_ID_BCM4331 0x4331
++#define BCMA_CHIP_ID_BCM6362 0x6362
++#define BCMA_CHIP_ID_BCM4360 0x4360
++#define BCMA_CHIP_ID_BCM4352 0x4352
++
++/* Chip IDs of SoCs */
++#define BCMA_CHIP_ID_BCM4706 0x5300
++#define BCMA_PKG_ID_BCM4706L 1
++#define BCMA_CHIP_ID_BCM4716 0x4716
++#define BCMA_PKG_ID_BCM4716 8
++#define BCMA_PKG_ID_BCM4717 9
++#define BCMA_PKG_ID_BCM4718 10
++#define BCMA_CHIP_ID_BCM47162 47162
++#define BCMA_CHIP_ID_BCM4748 0x4748
++#define BCMA_CHIP_ID_BCM4749 0x4749
++#define BCMA_CHIP_ID_BCM5356 0x5356
++#define BCMA_CHIP_ID_BCM5357 0x5357
++#define BCMA_PKG_ID_BCM5358 9
++#define BCMA_PKG_ID_BCM47186 10
++#define BCMA_PKG_ID_BCM5357 11
++#define BCMA_CHIP_ID_BCM53572 53572
++#define BCMA_PKG_ID_BCM47188 9
++
+ struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
+@@ -136,8 +184,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
+ u8 core_unit;
u32 addr;
++ u32 addr1;
u32 wrap;
-@@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d
+
+ void __iomem *io_addr;
+@@ -175,6 +225,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -195,6 +202,7 @@ struct bcma_bus {
+@@ -191,14 +247,18 @@ struct bcma_bus {
+
+ struct bcma_chipinfo chipinfo;
+
++ struct bcma_boardinfo boardinfo;
++
+ struct bcma_device *mapped_core;
struct list_head cores;
u8 nr_cores;
u8 init_done:1;
+ u8 num;
struct bcma_drv_cc drv_cc;
- struct bcma_drv_pci drv_pci;
-@@ -282,6 +290,7 @@ static inline void bcma_maskset16(struct
+- struct bcma_drv_pci drv_pci;
++ struct bcma_drv_pci drv_pci[2];
+ struct bcma_drv_mips drv_mips;
++ struct bcma_drv_gmac_cmn drv_gmac_cmn;
+
+ /* We decided to share SPROM struct with SSB as long as we do not need
+ * any hacks for BCMA. This simplifies drivers code. */
+@@ -282,6 +342,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -289,6 +350,7 @@ extern void bcma_core_set_clockmode(stru
+ enum bcma_clkmode clkmode);
+ extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+ bool on);
++extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
+ #define BCMA_DMA_TRANSLATION_MASK 0xC0000000
+ #define BCMA_DMA_TRANSLATION_NONE 0x00000000
+ #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -56,6 +56,9 @@
+@@ -1,6 +1,9 @@
+ #ifndef LINUX_BCMA_DRIVER_CC_H_
+ #define LINUX_BCMA_DRIVER_CC_H_
+
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
+ /** ChipCommon core registers. **/
+ #define BCMA_CC_ID 0x0000
+ #define BCMA_CC_ID_ID 0x0000FFFF
+@@ -24,7 +27,7 @@
+ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+-#define BCMA_CC_FLASHT_NFLASH 0x00000200
++#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */
+ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+ #define BCMA_PLLTYPE_NONE 0x00000000
+@@ -45,6 +48,7 @@
+ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
++#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */
+ #define BCMA_CC_CORECTL 0x0008
+ #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+@@ -56,6 +60,9 @@
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
#define BCMA_CC_OTPC 0x0014 /* OTP control */
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
-@@ -72,6 +75,8 @@
+@@ -72,6 +79,8 @@
#define BCMA_CC_OTPP_READ 0x40000000
#define BCMA_CC_OTPP_START 0x80000000
#define BCMA_CC_OTPP_BUSY 0x80000000
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +84,10 @@
+@@ -79,6 +88,22 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
++#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001
++#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002
++#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004
++#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008
++#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010
++#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020
++#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
++#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
++#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
++#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
++#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
++#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -181,6 +190,22 @@
+@@ -108,10 +133,58 @@
+ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+ #define BCMA_CC_FLASHCTL 0x0040
++/* Start/busy bit in flashcontrol */
++#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
++#define BCMA_CC_FLASHCTL_ACTION 0x00000700
++#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
+ #define BCMA_CC_FLASHCTL_START 0x80000000
+ #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++/* Flashcontrol action + opcodes for ST flashes */
++#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
++#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
++#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
++#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
++#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
++#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
++#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
++#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
++#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
++#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
++#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
++/* Flashcontrol action + opcodes for Atmel flashes */
++#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
++#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
++#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
++#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
++#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
++#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
++#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
++#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
++#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
++#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
++#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
++#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
++#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
++#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
++#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
+ #define BCMA_CC_FLASHADDR 0x0044
+ #define BCMA_CC_FLASHDATA 0x0048
++/* Status register bits for ST flashes */
++#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
++#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
++#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
++#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
++#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
++/* Status register bits for Atmel flashes */
++#define BCMA_CC_FLASHDATA_AT_READY 0x80
++#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
++#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
++#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
+ #define BCMA_CC_BCAST_ADDR 0x0050
+ #define BCMA_CC_BCAST_DATA 0x0054
+ #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+@@ -181,6 +254,45 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004
+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1
+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001
++/* Block 0x140 - 0x190 registers are chipset specific */
++#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */
++#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff
++#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */
++#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */
++#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */
++#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */
++/* NAND flash registers for BCM4706 (corerev = 31) */
++#define BCMA_CC_NFLASH_CTL 0x01A0
++#define BCMA_CC_NFLASH_CTL_ERR 0x08000000
++#define BCMA_CC_NFLASH_CONF 0x01A4
++#define BCMA_CC_NFLASH_COL_ADDR 0x01A8
++#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC
++#define BCMA_CC_NFLASH_DATA 0x01B0
++#define BCMA_CC_NFLASH_WAITCNT0 0x01B4
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +265,6 @@
+@@ -240,7 +352,60 @@
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
++/* NAND flash MLC controller registers (corerev >= 38) */
++#define BCMA_CC_NAND_REVISION 0x0C00
++#define BCMA_CC_NAND_CMD_START 0x0C04
++#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08
++#define BCMA_CC_NAND_CMD_ADDR 0x0C0C
++#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10
++#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14
++#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18
++#define BCMA_CC_NAND_SPARE_RD0 0x0C20
++#define BCMA_CC_NAND_SPARE_RD4 0x0C24
++#define BCMA_CC_NAND_SPARE_RD8 0x0C28
++#define BCMA_CC_NAND_SPARE_RD12 0x0C2C
++#define BCMA_CC_NAND_SPARE_WR0 0x0C30
++#define BCMA_CC_NAND_SPARE_WR4 0x0C34
++#define BCMA_CC_NAND_SPARE_WR8 0x0C38
++#define BCMA_CC_NAND_SPARE_WR12 0x0C3C
++#define BCMA_CC_NAND_ACC_CONTROL 0x0C40
++#define BCMA_CC_NAND_CONFIG 0x0C48
++#define BCMA_CC_NAND_TIMING_1 0x0C50
++#define BCMA_CC_NAND_TIMING_2 0x0C54
++#define BCMA_CC_NAND_SEMAPHORE 0x0C58
++#define BCMA_CC_NAND_DEVID 0x0C60
++#define BCMA_CC_NAND_DEVID_X 0x0C64
++#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68
++#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C
++#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70
++#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74
++#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78
++#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C
++#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80
++#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84
++#define BCMA_CC_NAND_READ_ADDR_X 0x0C90
++#define BCMA_CC_NAND_READ_ADDR 0x0C94
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C
++#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0
++#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC
++#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0
++#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4
++#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0
++#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0
++#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4
++#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8
++#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC
++#define BCMA_CC_NAND_SPARE_RD16 0x0D30
++#define BCMA_CC_NAND_SPARE_RD20 0x0D34
++#define BCMA_CC_NAND_SPARE_RD24 0x0D38
++#define BCMA_CC_NAND_SPARE_RD28 0x0D3C
++#define BCMA_CC_NAND_CACHE_ADDR 0x0D40
++#define BCMA_CC_NAND_CACHE_DATA 0x0D44
++#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48
++#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
+@@ -256,6 +421,15 @@
+
+ /* 4706 PMU */
+ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0
++#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */
++#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000
++#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16
++#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000
++#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12
++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8
++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+@@ -284,6 +458,19 @@
+ #define BCMA_CC_PPL_PCHI_OFF 5
+ #define BCMA_CC_PPL_PCHI_MASK 0x0000003f
+
++#define BCMA_CC_PMU_PLL_CTL0 0
++#define BCMA_CC_PMU_PLL_CTL1 1
++#define BCMA_CC_PMU_PLL_CTL2 2
++#define BCMA_CC_PMU_PLL_CTL3 3
++#define BCMA_CC_PMU_PLL_CTL4 4
++#define BCMA_CC_PMU_PLL_CTL5 5
++
++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20
++
++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
++
+ /* BCM4331 ChipControl numbers. */
+ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
+ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
+@@ -297,9 +484,25 @@
+ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
+ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
+ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
++#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */
+ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
+ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+
++/* 43224 chip-specific ChipControl register bits */
++#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */
++#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
++#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
++
++/* 4313 Chip specific ChipControl register bits */
++#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
++
++/* BCM5357 ChipControl register bits */
++#define BCMA_CHIPCTL_5357_EXTPA BIT(14)
++#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15)
++#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
++#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
++#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -310,11 +513,35 @@ struct bcma_chipcommon_pmu {
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash {
++ bool present;
+ u8 buswidth;
+ u32 window;
+ u32 window_size;
+ };
+
++#ifdef CONFIG_BCMA_SFLASH
++struct bcma_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ struct mtd_info *mtd;
++};
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++struct mtd_info;
++
++struct bcma_nflash {
++ bool present;
++ bool boot; /* This is the flash the SoC boots from */
++
++ struct mtd_info *mtd;
++};
++#endif
++
+ struct bcma_serial_port {
+ void *regs;
+ unsigned long clockspeed;
+@@ -330,15 +557,30 @@ struct bcma_drv_cc {
+ u32 capabilities;
+ u32 capabilities_ext;
+ u8 setup_done:1;
++ u8 early_setup_done:1;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash pflash;
++#ifdef CONFIG_BCMA_SFLASH
++ struct bcma_sflash sflash;
++#endif
++#ifdef CONFIG_BCMA_NFLASH
++ struct bcma_nflash nflash;
++#endif
+
+ int nr_serial_ports;
+ struct bcma_serial_port serial_ports[4];
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
++ u32 ticks_per_ms;
++ struct platform_device *watchdog;
++
++ /* Lock for GPIO register access. */
++ spinlock_t gpio_lock;
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ struct gpio_chip gpio;
++#endif
+ };
+
+ /* Register access */
+@@ -355,14 +597,14 @@ struct bcma_drv_cc {
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+ extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
+-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+- u32 ticks);
++extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+@@ -375,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+ /* PMU support */
+ extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ u32 value);
+@@ -387,5 +632,6 @@ extern void bcma_chipco_chipctl_maskset(
+ u32 offset, u32 mask, u32 set);
+ extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set);
++extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
+@@ -0,0 +1,100 @@
++#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_
++#define LINUX_BCMA_DRIVER_GMAC_CMN_H_
++
++#include <linux/types.h>
++
++#define BCMA_GMAC_CMN_STAG0 0x000
++#define BCMA_GMAC_CMN_STAG1 0x004
++#define BCMA_GMAC_CMN_STAG2 0x008
++#define BCMA_GMAC_CMN_STAG3 0x00C
++#define BCMA_GMAC_CMN_PARSER_CTL 0x020
++#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024
++#define BCMA_GMAC_CMN_PHY_ACCESS 0x100
++#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff
++#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000
++#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16
++#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000
++#define BCMA_GMAC_CMN_PA_REG_SHIFT 24
++#define BCMA_GMAC_CMN_PA_WRITE 0x20000000
++#define BCMA_GMAC_CMN_PA_START 0x40000000
++#define BCMA_GMAC_CMN_PHY_CTL 0x104
++#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f
++#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000
++#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16
++#define BCMA_GMAC_CMN_PC_MTE 0x00800000
++#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110
++#define BCMA_GMAC_CMN_CFP_ACCESS 0x200
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C
++#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250
++#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0
++#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4
++#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8
++#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC
++#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0
++#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300
++#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304
++#define BCMA_GMAC_CMN_UDF_0_A8 0x308
++#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310
++#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314
++#define BCMA_GMAC_CMN_UDF_1_A8 0x318
++#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320
++#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324
++#define BCMA_GMAC_CMN_UDF_2_A8 0x328
++#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330
++#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334
++#define BCMA_GMAC_CMN_UDF_0_B8 0x338
++#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340
++#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344
++#define BCMA_GMAC_CMN_UDF_1_B8 0x348
++#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350
++#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354
++#define BCMA_GMAC_CMN_UDF_2_B8 0x358
++#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360
++#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364
++#define BCMA_GMAC_CMN_UDF_0_C8 0x368
++#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370
++#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374
++#define BCMA_GMAC_CMN_UDF_1_C8 0x378
++#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380
++#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384
++#define BCMA_GMAC_CMN_UDF_2_C8 0x388
++#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390
++#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394
++#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394
++
++struct bcma_drv_gmac_cmn {
++ struct bcma_device *core;
++
++ /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and
++ * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */
++ struct mutex phy_mutex;
++};
++
++/* Register access */
++#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset)
++#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset)
++#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val)
++#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val)
++
++#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
++extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
++#else
++static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
++#endif
++
++#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -35,13 +35,15 @@ struct bcma_device;
+ struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+- unsigned int assigned_irqs;
++ u8 early_setup_done:1;
+ };
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+ #endif
+
+ extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -53,6 +53,35 @@ struct pci_dev;
+@@ -53,11 +53,47 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
-@@ -72,20 +101,114 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
+ #define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
++#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */
++#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */
++#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */
++#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */
++#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */
++#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */
++#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */
+
+ /* SBtoPCIx */
+ #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
+@@ -72,20 +108,118 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */
+#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
++#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */
+#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
};
/* Register access */
++#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset)
#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
++#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
struct bcma_device *core, bool enable);
-
++extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
++
+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
-+
+
#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
-@@ -56,4 +56,31 @@
+@@ -11,11 +11,13 @@
+ #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+ #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
++#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8
+ #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+ #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+ #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */
+ #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */
+ #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */
++#define BCMA_CLKCTLST_EXTRESST_SHIFT 24
+ /* Is there any BCM4328 on BCMA bus? */
+ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+@@ -56,4 +58,36 @@
#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2
+ * (2 ZettaBytes), high 32 bits
+ */
++
++#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
++#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
++#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
++#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
+
#endif /* LINUX_BCMA_REGS_H_ */
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -4618,7 +4618,7 @@ static int b43_wireless_core_init(struct
+ switch (dev->dev->bus_type) {
+ #ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
++ bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ dev->dev->bdev, true);
+ break;
+ #endif
+--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+@@ -533,7 +533,7 @@ ai_buscore_setup(struct si_info *sii, st
+
+ /* fixup necessary chip/core configurations */
+ if (!sii->pch) {
+- sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
++ sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci[0].core);
+ if (sii->pch == NULL)
+ return false;
+ }