+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
+@@ -26,16 +26,23 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
help
PCI core hostmode operation (external PCI bus).
-@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
+ config BCMA_HOST_SOC
+- bool
+- depends on BCMA_DRIVER_MIPS
++ bool "Support for BCMA in a SoC"
++ depends on BCMA
++ help
++ Host interface for a Broadcom AIX bus directly mapped into
++ the memory. This only works with the Broadcom SoCs from the
++ BCM47XX line.
++
++ If unsure, say N
+
+ config BCMA_DRIVER_MIPS
+ bool "BCMA Broadcom MIPS core driver"
+@@ -46,6 +53,33 @@ config BCMA_DRIVER_MIPS
If unsure, say N
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -10,10 +10,19 @@
+@@ -10,10 +10,21 @@
#define BCMA_CORE_SIZE 0x1000
/* main.c */
-int bcma_bus_register(struct bcma_bus *bus);
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+int __devinit bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
+@@ -36,11 +49,36 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
-@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
+@@ -48,8 +86,29 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+/* driver_gpio.c */
+int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
+#else
+static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ return -ENOTSUPP;
+}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
- udelay(10);
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,12 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -64,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
+
+@@ -42,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -64,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma
switch (clkmode) {
case BCMA_CLKMODE_FAST:
bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
for (i = 0; i < 1500; i++) {
if (bcma_read32(core, BCMA_CLKCTLST) &
BCMA_CLKCTLST_HAVEHT) {
-@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+@@ -74,10 +97,10 @@ void bcma_core_set_clockmode(struct bcma
udelay(10);
}
if (i)
break;
}
}
-@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -101,9 +124,15 @@ void bcma_core_pll_ctl(struct bcma_devic
udelay(10);
}
if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
} else {
- pr_warn("Disabling PLL not supported yet!\n");
-+ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
}
}
EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
-@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+@@ -119,8 +148,8 @@ u32 bcma_core_dma_translation(struct bcm
else
return BCMA_DMA_TRANSLATION_DMA32_CMT;
default:
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,29 +25,136 @@ static inline u32 bcma_cc_write32_masked
return value;
}
-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
{
- u32 leddc_on = 10;
- u32 leddc_off = 90;
- if (cc->setup_done)
+ return 20000000;
+}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+
+static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+{
+ bcma_core_chipcommon_early_init(cc);
+
if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -44,7 +146,7 @@ void bcma_core_chipcommon_init(struct bc
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
-@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
+
+ return res;
}
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
+
+ return res;
}
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+/*
+ * If the bit is set to 0, chipcommon controlls this GPIO,
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
-@@ -137,8 +325,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -137,12 +335,11 @@ void bcma_chipco_serial_init(struct bcma
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
return;
}
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -0,0 +1,44 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
-+#include "bcma_private.h"
-+
+struct platform_device bcma_nflash_dev = {
+ .name = "bcma_nflash",
+ .num_resources = 0,
+ struct bcma_bus *bus = cc->core->bus;
+
+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
-+ cc->core->id.rev != 0x38) {
++ cc->core->id.rev != 38) {
+ bcma_err(bus, "NAND flash on unsupported board!\n");
+ return -ENOTSUPP;
+ }
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
{
-@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -54,19 +56,106 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
--static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
--{
-- struct bcma_bus *bus = cc->core->bus;
--
-- switch (bus->chipinfo.id) {
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
+ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
+
+ switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
+ break;
- default:
- pr_err("PLL init unknown for device 0x%04X\n",
- bus->chipinfo.id);
-- }
--}
--
- static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
- {
- struct bcma_bus *bus = cc->core->bus;
+ }
+ }
+
+@@ -76,16 +165,32 @@ static void bcma_pmu_resources_init(stru
u32 min_msk = 0, max_msk = 0;
switch (bus->chipinfo.id) {
break;
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
+ break;
default:
- pr_err("PMU resource config unknown for device 0x%04X\n",
- bus->chipinfo.id);
}
/* Set the resource masks. */
-@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +198,12 @@ static void bcma_pmu_resources_init(stru
bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-}
--
+
-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
-{
- struct bcma_bus *bus = cc->core->bus;
-
+-
- switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
}
/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +217,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
val |= BCMA_CHIPCTL_4331_EXTPA_EN;
if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -174,37 +165,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -174,37 +287,48 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
-
-- bcma_pmu_pll_init(cc);
+ bcma_pmu_pll_init(cc);
bcma_pmu_resources_init(cc);
- bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
- case 0x5357:
- case 0x4749:
- case 53572:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
/* always 20Mhz */
return 20000 * 1000;
- case 0x5356:
- case 0x5300:
-+ case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
/* always 25Mhz */
return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
default:
- pr_warn("No ALP clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
}
return BCMA_CC_PMU_ALP_CLOCK;
}
-@@ -212,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -212,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
/* Find the output of the "m" pll divider given pll controls that start with
* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
*/
{
u32 tmp, div, ndiv, p1, p2, fc;
struct bcma_bus *bus = cc->core->bus;
-@@ -221,7 +206,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -221,7 +345,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
BUG_ON(!m || m > 4);
/* Detect failure in clock setting */
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & 0x40000)
-@@ -240,60 +226,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +365,96 @@ static u32 bcma_pmu_clock(struct bcma_dr
ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
/* Do calculation in Mhz */
+
/* query bus clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
-+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
}
return BCMA_CC_PMU_HT_CLOCK;
}
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
/* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
break;
default:
-@@ -301,10 +322,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +462,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
+ 0x88888815);
+ }
+
-+ tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
-+#include "bcma_private.h"
-+
+static struct resource bcma_sflash_resource = {
+ .name = "bcma_sflash",
+ .start = BCMA_SOC_FLASH2,
+ u16 numblocks;
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+{
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
-+ struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+}
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
-@@ -0,0 +1,98 @@
+@@ -0,0 +1,114 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver
+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+}
+
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
++
+int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ chip->set = bcma_gpio_set_value;
+ chip->direction_input = bcma_gpio_direction_input;
+ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return gpiochip_add(chip);
+}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -22,15 +22,15 @@
+@@ -14,23 +14,45 @@
+
+ #include <linux/bcma/bcma.h>
+
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+ #include <linux/time.h>
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data bcma_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource bcma_pflash_resource = {
++ .name = "bcma_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device bcma_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &bcma_pflash_data,
++ },
++ .resource = &bcma_pflash_resource,
++ .num_resources = 1,
++};
++
/* The 47162a0 hangs when reading MIPS DMP registers registers */
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
{
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
-@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct
return dev->core_index;
flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
- unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
-@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
unsigned int irq;
irqflag = bcma_core_mips_irqflag(dev);
- return 0;
+ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
}
- EXPORT_SYMBOL(bcma_core_mips_irq);
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
-@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
/* assign the new one */
if (irq == 0) {
-@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,17 +158,17 @@ static void bcma_core_mips_set_irq(struc
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
(1 << irqflag));
} else {
bcma_core_mips_set_irq(core, 0);
break;
}
-@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
+@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
for (i = 0; i <= 6; i++)
printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
printk("\n");
-@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
+@@ -161,7 +212,7 @@ static void bcma_core_mips_dump_irq(stru
{
struct bcma_device *core;
bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
}
}
-@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,9 +222,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,25 +232,81 @@ EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
+ struct bcma_drv_cc *cc = &bus->drv_cc;
++ struct bcma_pflash *pflash = &cc->pflash;
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
+ bcma_debug(bus, "Found parallel flash\n");
-+ cc->pflash.present = true;
-+ cc->pflash.window = BCMA_SOC_FLASH2;
-+ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = BCMA_SOC_FLASH2;
++ pflash->window_size = BCMA_SOC_FLASH2_SZ;
- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
BCMA_CC_FLASH_CFG_DS) == 0)
- bus->drv_cc.pflash.buswidth = 1;
-+ cc->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- bus->drv_cc.pflash.buswidth = 2;
-+ cc->pflash.buswidth = 2;
++ pflash->buswidth = 2;
++
++ bcma_pflash_data.width = pflash->buswidth;
++ bcma_pflash_resource.start = pflash->window;
++ bcma_pflash_resource.end = pflash->window + pflash->window_size;
++
break;
default:
- pr_err("flash not supported.\n");
+ bcma_debug(bus, "Found NAND flash\n");
+ bcma_nflash_init(cc);
+ }
- }
- }
-
++ }
++}
++
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus = mcore->core->bus;
+ mcore->early_setup_done = true;
+}
+
- void bcma_core_mips_init(struct bcma_drv_mips *mcore)
- {
- struct bcma_bus *bus;
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
+ }
+ }
+
+@@ -209,48 +316,59 @@ void bcma_core_mips_init(struct bcma_drv
struct bcma_device *core;
bus = mcore->core->bus;
- pr_info("Initializing MIPS core...\n");
+ if (mcore->setup_done)
+ return;
-+
-+ bcma_debug(bus, "Initializing MIPS core...\n");
- if (!mcore->setup_done)
- mcore->assigned_irqs = 1;
-+ bcma_core_mips_early_init(mcore);
++ bcma_debug(bus, "Initializing MIPS core...\n");
- /* Assign IRQs to all cores on the bus */
- list_for_each_entry_reverse(core, &bus->cores, list) {
- bcma_core_mips_set_irq(core,
- mcore->assigned_irqs++);
- break;
++ bcma_core_mips_early_init(mcore);
++
++ bcma_fix_i2s_irqflag(bus);
++
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM4748:
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
-+ core->irq = bcma_core_mips_irq(core) + 2;
++ core->irq = bcma_core_irq(core);
}
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -16,120 +17,124 @@
+@@ -16,120 +17,131 @@
* R/W ops.
**************************************************/
}
-#endif
- static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy)
{
- const u16 mdio_control = 0x128;
- const u16 mdio_data = 0x12C;
}
}
- static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
{
- const u16 mdio_control = 0x128;
- const u16 mdio_data = 0x12C;
return ret;
}
- static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device,
u8 address, u16 data)
{
- const u16 mdio_control = 0x128;
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
++}
++
++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device,
++ u8 address, u16 data)
++{
++ bcma_pcie_mdio_write(pc, device, address, data);
++ return bcma_pcie_mdio_read(pc, device, address);
}
/**************************************************
-@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
+@@ -138,88 +150,134 @@ static void bcma_pcie_mdio_write(struct
static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
{
- pr_err("Driver compiled without support for hostmode PCI\n");
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
- } else {
-- bcma_core_pci_clientmode_init(pc);
++
++ if (!pc->hostmode)
+ bcma_core_pci_clientmode_init(pc);
- }
++}
++
++void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
++{
++ struct bcma_drv_pci *pc;
++ u16 data;
- pc->setup_done = true;
-+ if (!pc->hostmode)
-+ bcma_core_pci_clientmode_init(pc);
++ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
++ return;
++
++ pc = &bus->drv_pci[0];
++
++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
++ data = up ? 0x74 : 0x7C;
++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
++ data = up ? 0x75 : 0x7D;
++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
++ }
}
++EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
-@@ -236,3 +261,17 @@ out:
+@@ -236,3 +294,42 @@ out:
return err;
}
EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+
-+void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
+{
+ u32 w;
+
+ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
+ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
+}
-+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
++
++void bcma_core_pci_up(struct bcma_bus *bus)
++{
++ struct bcma_drv_pci *pc;
++
++ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
++ return;
++
++ pc = &bus->drv_pci[0];
++
++ bcma_core_pci_extend_L1timer(pc, true);
++}
++EXPORT_SYMBOL_GPL(bcma_core_pci_up);
++
++void bcma_core_pci_down(struct bcma_bus *bus)
++{
++ struct bcma_drv_pci *pc;
++
++ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
++ return;
++
++ pc = &bus->drv_pci[0];
++
++ bcma_core_pci_extend_L1timer(pc, false);
++}
++EXPORT_SYMBOL_GPL(bcma_core_pci_down);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,600 @@
+@@ -2,13 +2,622 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
+out:
+ return addr;
+}
-
--void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++
+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ void *buf, int len)
- {
-- pr_err("No support for PCI core in hostmode yet\n");
++{
+ int err = -EINVAL;
+ u32 addr, val;
+ void __iomem *mmio = 0;
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
-+ return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
-+
-+ val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
+out:
+ return err;
+}
-+
+
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ const void *buf, int len)
-+{
+ {
+- pr_err("No support for PCI core in hostmode yet\n");
+ int err = -EINVAL;
-+ u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ if (off < PCI_CONFIG_SPACE_SIZE) {
-+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
-+ mmio = ioremap_nocache(addr, sizeof(val));
-+ if (!mmio)
-+ goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
-+ val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
-+ val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+ val = *((const u32 *)buf);
+ break;
+ }
-+ if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
-+ bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
-+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+ /* Reset RC */
+ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-+ usleep_range(1000, 2000);
++ msleep(50);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
+
+ bcma_core_pci_enable_crs(pc);
+
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
+{
+ struct bcma_drv_pci_host *pc_host;
++ int readrq;
+
+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+ /* This is not a device on the PCI-core bridge. */
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
-+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
++ readrq = pcie_get_readrq(dev);
++ if (readrq > 128) {
++ pr_info("change PCIe max read request size from %i to 128\n", readrq);
++ pcie_set_readrq(dev, 128);
++ }
+ return 0;
+}
+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
-+ return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
}
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
static int bcma_host_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
-@@ -257,17 +261,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -257,17 +261,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
bcma_host_pci_resume);
#define BCMA_PM_OPS (&bcma_pm_ops)
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ 0, },
};
-@@ -277,7 +284,7 @@ static struct pci_driver bcma_pci_bridge
+@@ -277,7 +285,7 @@ static struct pci_driver bcma_pci_bridge
.name = "bcma-pci-bridge",
.id_table = bcma_pci_bridge_tbl,
.probe = bcma_host_pci_probe,
{
struct bcma_device *core;
-@@ -65,6 +79,19 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +79,38 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
+ return core;
+ }
+ return NULL;
++}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
+}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -84,16 +111,18 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +130,23 @@ static int bcma_register_cores(struct bc
list_for_each_entry(core, &bus->cores, list) {
/* We support that cores ourself */
switch (core->id.id) {
continue;
}
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +164,98 @@ static int bcma_register_cores(struct bc
err = device_register(&core->dev);
if (err) {
dev_id++;
}
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ if (bus->drv_cc.pflash.present) {
++ err = platform_device_register(&bcma_pflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering parallel flash\n");
++ }
++#endif
++
+#ifdef CONFIG_BCMA_SFLASH
+ if (bus->drv_cc.sflash.present) {
+ err = platform_device_register(&bcma_sflash_dev);
err = bcma_bus_scan(bus);
if (err) {
- pr_err("Failed to scan: %d\n", err);
+- return -1;
+ bcma_err(bus, "Failed to scan: %d\n", err);
- return -1;
++ return err;
}
+ /* Early init CC core */
if (core) {
bus->drv_cc.core = core;
bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -159,30 +269,54 @@ int bcma_bus_register(struct bcma_bus *b
}
/* Init PCIE core */
void bcma_bus_unregister(struct bcma_bus *bus)
{
+ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
+
+ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
}
int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
+@@ -196,14 +330,14 @@ int __init bcma_bus_early_register(struc
bcma_init_bus(bus);
match.manuf = BCMA_MANUF_BCM;
return -1;
}
-@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +349,25 @@ int __init bcma_bus_early_register(struc
/* Scan for mips core */
err = bcma_bus_scan_early(bus, &match, core_mips);
if (err) {
return 0;
}
-@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +393,7 @@ int bcma_bus_resume(struct bcma_bus *bus
struct bcma_device *core;
/* Init CC core */
}
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -19,15 +19,27 @@ struct bcma_device_id_name {
+@@ -19,15 +19,39 @@ struct bcma_device_id_name {
u16 id;
const char *name;
};
+ { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
+ { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
+ { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" },
++ { BCMA_CORE_DMA, "DMA" },
++ { BCMA_CORE_SDIO3, "SDIO3" },
++ { BCMA_CORE_USB20, "USB 2.0" },
++ { BCMA_CORE_USB30, "USB 3.0" },
++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" },
++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" },
++ { BCMA_CORE_ROM, "ROM" },
++ { BCMA_CORE_NAND, "NAND flash controller" },
++ { BCMA_CORE_QSPI, "SPI flash controller" },
++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" },
++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" },
+ { BCMA_CORE_AMEMC, "AMEMC (DDR)" },
+ { BCMA_CORE_ALTA, "ALTA (I2S)" },
{ BCMA_CORE_INVALID, "Invalid" },
{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
{ BCMA_CORE_V90, "V90" },
{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
-@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n
+@@ -44,7 +68,6 @@ struct bcma_device_id_name bcma_device_n
{ BCMA_CORE_PHY_A, "PHY A" },
{ BCMA_CORE_PHY_B, "PHY B" },
{ BCMA_CORE_PHY_G, "PHY G" },
{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
-@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n
+@@ -58,15 +81,11 @@ struct bcma_device_id_name bcma_device_n
{ BCMA_CORE_PHY_N, "PHY N" },
{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
-@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
+@@ -77,18 +96,45 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
{ BCMA_CORE_DEFAULT, "Default" },
};
-const char *bcma_device_name(struct bcma_device_id *id)
+ break;
+ default:
+ return "UNKNOWN";
- }
++ }
+
+ for (i = 0; i < size; i++) {
+ if (names[i].id == id->id)
+ return names[i].name;
-+ }
+ }
+
return "UNKNOWN";
}
-@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
+@@ -105,19 +151,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -127,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -143,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -157,7 +203,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -167,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+@@ -179,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc
+ ((ent & SCAN_ADDR_TYPE) != type) ||
+ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+ bcma_erom_push_ent(eromptr);
+- return -EINVAL;
++ return (u32)-EINVAL;
+ }
+
+ addrl = ent & SCAN_ADDR_ADDR;
+@@ -212,11 +258,24 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
+ }
+ return NULL;
+}
++
++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO)
+
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
-@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+ {
+- s32 tmp;
++ u32 tmp;
+ u8 i, j;
+ s32 cia, cib;
+ u8 ports[2], wrappers[2];
+@@ -252,11 +311,15 @@ static int bcma_get_next_core(struct bcm
/* check if component is a core at all */
if (wrappers[0] + wrappers[1] == 0) {
}
if (bcma_erom_is_bridge(bus, eromptr)) {
-@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+@@ -286,19 +349,36 @@ static int bcma_get_next_core(struct bcm
return -EILSEQ;
}
+ * the main register space for the core
+ */
+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
-+ if (tmp <= 0) {
++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
+ /* Try again to see if it is a bridge */
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_BRIDGE, 0);
-+ if (tmp <= 0) {
++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
+ return -EILSEQ;
+ } else {
+ bcma_info(bus, "Bridge found\n");
/* get & parse slave ports */
for (i = 0; i < ports[1]; i++) {
for (j = 0; ; j++) {
-@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SLAVE, i);
+- if (tmp < 0) {
++ if (IS_ERR_VALUE_U32(tmp)) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: slave port %d "
+ * "has %d descriptors\n", i, j); */
break;
} else {
if (i == 0 && j == 0)
}
}
}
-@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
+@@ -308,7 +388,7 @@ static int bcma_get_next_core(struct bcm
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_MWRAP, i);
+- if (tmp < 0) {
++ if (IS_ERR_VALUE_U32(tmp)) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * "has %d descriptors\n", i, j); */
+@@ -326,7 +406,7 @@ static int bcma_get_next_core(struct bcm
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, eromptr,
+ SCAN_ADDR_TYPE_SWRAP, i + hack);
+- if (tmp < 0) {
++ if (IS_ERR_VALUE_U32(tmp)) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * has %d descriptors\n", i, j); */
+@@ -353,6 +433,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
if (bus->init_done)
return;
-@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +444,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
bus->init_done = true;
}
-@@ -392,9 +460,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,9 +476,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
INIT_LIST_HEAD(&core->list);
core->bus = bus;
-@@ -409,25 +480,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -409,25 +496,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
} else if (err == -ESPIPE) {
break;
}
}
int __init bcma_bus_scan_early(struct bcma_bus *bus,
-@@ -467,21 +541,21 @@ int __init bcma_bus_scan_early(struct bc
+@@ -467,21 +557,21 @@ int __init bcma_bus_scan_early(struct bc
else if (err == -ESPIPE)
break;
else if (err < 0)
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -14,7 +16,57 @@
+@@ -14,18 +16,68 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
/**************************************************
* R/W ops.
-@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -72,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -102,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -124,124 +180,439 @@ static int bcma_sprom_valid(const u16 *s
* SPROM extraction.
**************************************************/
- u16 v;
+ u16 v, o;
int i;
+-
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
- SSB_SPROM_REVISION_REV;
-@@ -137,107 +216,390 @@ static void bcma_sprom_extract_r8(struct
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
+ SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
+ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ default:
+ return true;
+ }
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
- int err = 0;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
- return -ENOENT;
+ if (!bcma_sprom_ext_available(bus)) {
+ bool sprom_onchip;
-+
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+ /*
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ }
+ }
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
- if (!sprom)
- return -ENOMEM;
-
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
+- bcma_sprom_read(bus, offset, sprom);
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
- if (bus->chipinfo.id == 0x4331)
+- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ kfree(sprom);
++ }
+
+- err = bcma_sprom_valid(sprom);
+- if (err)
+- goto out;
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
- err = bcma_sprom_valid(sprom);
-- if (err)
+- bcma_sprom_extract_r8(bus, sprom);
+ if (err) {
-+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
- bcma_sprom_extract_r8(bus, sprom);
-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -7,9 +7,10 @@
enum bcma_clkmode {
BCMA_CLKMODE_FAST,
BCMA_CLKMODE_DYNAMIC,
-@@ -65,6 +71,13 @@ struct bcma_host_ops {
+@@ -65,6 +71,25 @@ struct bcma_host_ops {
/* Core-ID values. */
#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
+#define BCMA_CORE_4706_CHIPCOMMON 0x500
++#define BCMA_CORE_PCIEG2 0x501
++#define BCMA_CORE_DMA 0x502
++#define BCMA_CORE_SDIO3 0x503
++#define BCMA_CORE_USB20 0x504
++#define BCMA_CORE_USB30 0x505
++#define BCMA_CORE_A9JTAG 0x506
++#define BCMA_CORE_DDR23 0x507
++#define BCMA_CORE_ROM 0x508
++#define BCMA_CORE_NAND 0x509
++#define BCMA_CORE_QSPI 0x50A
++#define BCMA_CORE_CHIPCOMMON_B 0x50B
+#define BCMA_CORE_4706_SOC_RAM 0x50E
++#define BCMA_CORE_ARMCA9 0x510
+#define BCMA_CORE_4706_MAC_GBIT 0x52D
+#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */
+#define BCMA_CORE_ALTA 0x534 /* I2S core */
#define BCMA_CORE_INVALID 0x700
#define BCMA_CORE_CHIPCOMMON 0x800
#define BCMA_CORE_ILINE20 0x801
-@@ -125,6 +138,41 @@ struct bcma_host_ops {
+@@ -121,10 +146,109 @@ struct bcma_host_ops {
+ #define BCMA_CORE_I2S 0x834
+ #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
+ #define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+#define BCMA_CHIP_ID_BCM43224 43224
+#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+#define BCMA_PKG_ID_BCM5357 11
+#define BCMA_CHIP_ID_BCM53572 53572
+#define BCMA_PKG_ID_BCM47188 9
++#define BCMA_CHIP_ID_BCM4707 53010
++#define BCMA_PKG_ID_BCM4707 1
++#define BCMA_PKG_ID_BCM4708 2
++#define BCMA_PKG_ID_BCM4709 0
++#define BCMA_CHIP_ID_BCM53018 53018
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
+
struct bcma_device {
struct bcma_bus *bus;
struct bcma_device_id id;
-@@ -136,8 +184,10 @@ struct bcma_device {
+@@ -136,8 +260,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
u32 wrap;
void __iomem *io_addr;
-@@ -175,6 +225,12 @@ int __bcma_driver_register(struct bcma_d
+@@ -175,6 +301,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -191,14 +247,18 @@ struct bcma_bus {
+@@ -191,14 +323,18 @@ struct bcma_bus {
struct bcma_chipinfo chipinfo;
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
-@@ -282,6 +342,7 @@ static inline void bcma_maskset16(struct
+@@ -282,6 +418,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
-@@ -289,6 +350,7 @@ extern void bcma_core_set_clockmode(stru
+@@ -289,6 +426,7 @@ extern void bcma_core_set_clockmode(stru
enum bcma_clkmode clkmode);
extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
bool on);
#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
-#define BCMA_CC_FLASHT_NFLASH 0x00000200
-+#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
#define BCMA_PLLTYPE_NONE 0x00000000
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +88,22 @@
+@@ -79,6 +88,23 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
+#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
+#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -108,10 +133,58 @@
+@@ -108,10 +134,58 @@
#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
#define BCMA_CC_FLASHCTL 0x0040
#define BCMA_CC_BCAST_ADDR 0x0050
#define BCMA_CC_BCAST_DATA 0x0054
#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
-@@ -181,6 +254,45 @@
+@@ -181,6 +255,45 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +352,60 @@
+@@ -203,6 +316,9 @@
+ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */
++#define BCMA_CC_PMU_CTL_RES_SHIFT 13
++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */
+ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
+ #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+@@ -214,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -239,8 +357,66 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
+/* NAND flash MLC controller registers (corerev >= 38) */
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -256,6 +421,15 @@
+@@ -256,6 +432,32 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
++
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
-@@ -284,6 +458,19 @@
+@@ -284,6 +486,19 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +484,25 @@
+@@ -297,9 +512,56 @@
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -310,11 +513,35 @@ struct bcma_chipcommon_pmu {
+@@ -310,11 +572,36 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash {
+ u32 size;
+
+ struct mtd_info *mtd;
++ void *priv;
+};
+#endif
+
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -330,15 +557,30 @@ struct bcma_drv_cc {
+@@ -330,15 +617,30 @@ struct bcma_drv_cc {
u32 capabilities;
u32 capabilities_ext;
u8 setup_done:1;
};
/* Register access */
-@@ -355,14 +597,14 @@ struct bcma_drv_cc {
+@@ -355,14 +657,16 @@ struct bcma_drv_cc {
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
- u32 ticks);
+extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-@@ -375,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -375,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
-@@ -387,5 +632,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -387,5 +694,8 @@ extern void bcma_chipco_chipctl_maskset(
u32 offset, u32 mask, u32 set);
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
++
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,15 @@ struct bcma_device;
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
struct bcma_drv_mips {
struct bcma_device *core;
u8 setup_done:1;
#ifdef CONFIG_BCMA_DRIVER_MIPS
extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
#else
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
#endif
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;
/* SBtoPCIx */
#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
-@@ -72,20 +108,118 @@ struct pci_dev;
+@@ -72,20 +108,143 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
++#define BCMA_CORE_PCI_
++
++/* MDIO devices (SERDES modules) */
++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000
++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001
++#define BCMA_CORE_PCI_MDIO_BLK0 0x800
++#define BCMA_CORE_PCI_MDIO_BLK1 0x801
++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16
++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17
++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18
++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19
++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A
++#define BCMA_CORE_PCI_MDIO_BLK2 0x802
++#define BCMA_CORE_PCI_MDIO_BLK3 0x803
++#define BCMA_CORE_PCI_MDIO_BLK4 0x804
++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */
++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820
++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831
++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840
++
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
+struct bcma_drv_pci;
++struct bcma_bus;
+
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+struct bcma_drv_pci_host {
+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
struct bcma_device *core, bool enable);
-+extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
++extern void bcma_core_pci_up(struct bcma_bus *bus);
++extern void bcma_core_pci_down(struct bcma_bus *bus);
++extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
+
+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
/* Is there any BCM4328 on BCMA bus? */
#define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
-@@ -56,4 +58,36 @@
+@@ -35,6 +37,7 @@
+ #define BCMA_IOST_BIST_DONE 0x8000
+ #define BCMA_RESET_CTL 0x0800
+ #define BCMA_RESET_CTL_RESET 0x0001
++#define BCMA_RESET_ST 0x0804
+
+ /* BCMA PCI config space registers. */
+ #define BCMA_PCI_PMCSR 0x44
+@@ -56,4 +59,36 @@
#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */