help
PCI core hostmode operation (external PCI bus).
+@@ -46,6 +46,15 @@ config BCMA_DRIVER_MIPS
+
+ If unsure, say N
+
++config BCMA_DRIVER_GMAC_CMN
++ bool "BCMA Broadcom GBIT MAC COMMON core driver"
++ depends on BCMA
++ help
++ Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
++ specific Advanced Microcontroller Bus.
++
++ If unsure, say N
++
+ config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+--- a/drivers/bcma/Makefile
++++ b/drivers/bcma/Makefile
+@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver
+ bcma-y += driver_pci.o
+ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
+ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
++bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
+ bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+ bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+ obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -13,7 +13,7 @@
+@@ -10,10 +10,19 @@
+
+ #define BCMA_CORE_SIZE 0x1000
+
++#define bcma_err(bus, fmt, ...) \
++ pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_warn(bus, fmt, ...) \
++ pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_info(bus, fmt, ...) \
++ pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++#define bcma_debug(bus, fmt, ...) \
++ pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++
struct bcma_bus;
/* main.c */
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -48,8 +48,12 @@ extern int __init bcma_host_pci_init(voi
+@@ -48,8 +57,12 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
udelay(1);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -77,7 +78,7 @@ void bcma_core_set_clockmode(struct bcma
- pr_err("HT force timeout\n");
+@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+ udelay(10);
+ }
+ if (i)
+- pr_err("HT force timeout\n");
++ bcma_err(core->bus, "HT force timeout\n");
break;
case BCMA_CLKMODE_DYNAMIC:
- pr_warn("Dynamic clockmode not supported yet!\n");
break;
}
}
+@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+ udelay(10);
+ }
+ if (i)
+- pr_err("PLL enable timeout\n");
++ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- pr_warn("Disabling PLL not supported yet!\n");
++ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+ else
+ return BCMA_DMA_TRANSLATION_DMA32_CMT;
+ default:
+- pr_err("DMA translation unknown for host %d\n",
+- core->bus->hosttype);
++ bcma_err(core->bus, "DMA translation unknown for host %d\n",
++ core->bus->hosttype);
+ }
+ return BCMA_DMA_TRANSLATION_NONE;
+ }
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -44,7 +44,7 @@ void bcma_core_chipcommon_init(struct bc
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+ bcma_pmu_init(cc);
+ if (cc->capabilities & BCMA_CC_CAP_PCTL)
+- pr_err("Power control not implemented!\n");
++ bcma_err(cc->core->bus, "Power control not implemented!\n");
+
+ if (cc->core->id.rev >= 16) {
+ if (cc->core->bus->sprom.leddc_on_time &&
+@@ -137,8 +137,7 @@ void bcma_chipco_serial_init(struct bcma
+ | BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ } else {
+- pr_err("serial not supported on this device ccrev: 0x%x\n",
+- ccrev);
++ bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev);
+ return;
+ }
+
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru
+@@ -3,7 +3,8 @@
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <m@bues.ch>
+- * Copyright 2007, Broadcom Corporation
++ * Copyright 2007, 2011, Broadcom Corporation
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
+-static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+-{
+- struct bcma_bus *bus = cc->core->bus;
+-
+- switch (bus->chipinfo.id) {
+- case 0x4313:
+- case 0x4331:
+- case 43224:
+- case 43225:
+- break;
+- default:
+- pr_err("PLL init unknown for device 0x%04X\n",
+- bus->chipinfo.id);
+- }
+-}
+-
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ u32 min_msk = 0, max_msk = 0;
+
+ switch (bus->chipinfo.id) {
+- case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
min_msk = 0x200D;
max_msk = 0xFFFF;
break;
-+ case 0x4331:
- case 43224:
- case 43225:
+- case 43224:
+- case 43225:
+- break;
+ default:
+- pr_err("PMU resource config unknown for device 0x%04X\n",
+- bus->chipinfo.id);
++ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
++ bus->chipinfo.id);
+ }
+
+ /* Set the resource masks. */
+@@ -93,22 +75,9 @@ static void bcma_pmu_resources_init(stru
+ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+ if (max_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+-}
+-
+-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+-{
+- struct bcma_bus *bus = cc->core->bus;
+
+- switch (bus->chipinfo.id) {
+- case 0x4313:
+- case 0x4331:
+- case 43224:
+- case 43225:
+- break;
+- default:
+- pr_err("PMU switch/regulators init unknown for device "
+- "0x%04X\n", bus->chipinfo.id);
+- }
++ /* Add some delay; allow resources to come up and settle. */
++ mdelay(2);
+ }
+
+ /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+@@ -122,8 +91,11 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ val |= BCMA_CHIPCTL_4331_EXTPA_EN;
+ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
+ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
++ else if (bus->chipinfo.rev > 0)
++ val |= BCMA_CHIPCTL_4331_EXTPA_EN2;
+ } else {
+ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2;
+ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+ }
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+@@ -134,26 +106,38 @@ void bcma_pmu_workarounds(struct bcma_dr
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4313:
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
++ case BCMA_CHIP_ID_BCM4313:
++ /* enable 12 mA drive strenth for 4313 and set chipControl
++ register bit 1 */
++ bcma_chipco_chipctl_maskset(cc, 0,
++ BCMA_CCTRL_4313_12MA_LED_DRIVE,
++ BCMA_CCTRL_4313_12MA_LED_DRIVE);
+ break;
+- case 0x4331:
+- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43431:
++ /* Ext PA lines must be enabled for tx on BCM4331 */
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
break;
+- case 43224:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43421:
++ /* enable 12 mA drive strenth for 43224 and set chipControl
++ register bit 15 */
+ if (bus->chipinfo.rev == 0) {
+- pr_err("Workarounds for 43224 rev 0 not fully "
+- "implemented\n");
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
++ BCMA_CCTRL_43224_GPIO_TOGGLE,
++ BCMA_CCTRL_43224_GPIO_TOGGLE);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
+ } else {
+- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
++ bcma_chipco_chipctl_maskset(cc, 0,
++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
++ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
+ }
+ break;
+- case 43225:
+- break;
+ default:
+- pr_err("Workarounds unknown for device 0x%04X\n",
+- bus->chipinfo.id);
++ bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n",
++ bus->chipinfo.id);
+ }
+ }
+
+@@ -164,8 +148,8 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+- pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+- pmucap);
++ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+@@ -174,12 +158,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
+- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+-
+- bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+- bcma_pmu_swreg_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+
+@@ -188,23 +167,22 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4716:
+- case 0x4748:
+- case 47162:
+- case 0x4313:
+- case 0x5357:
+- case 0x4749:
+- case 53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM53572:
+ /* always 20Mhz */
+ return 20000 * 1000;
+- case 0x5356:
+- case 0x5300:
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM4706:
+ /* always 25Mhz */
+ return 25000 * 1000;
+ default:
+- pr_warn("No ALP clock specified for %04X device, "
+- "pmu rev. %d, using default %d Hz\n",
+- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
++ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+ }
+ return BCMA_CC_PMU_ALP_CLOCK;
+ }
+@@ -221,7 +199,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+
+ BUG_ON(!m || m > 4);
+
+- if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) {
+ /* Detect failure in clock setting */
+ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ if (tmp & 0x40000)
+@@ -247,33 +226,62 @@ static u32 bcma_pmu_clock(struct bcma_dr
+ return (fc / div) * 1000000;
+ }
+
++static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++{
++ u32 tmp, ndiv, p1div, p2div;
++ u32 clock;
++
++ BUG_ON(!m || m > 4);
++
++ /* Get N, P1 and P2 dividers to determine CPU clock */
++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
++ ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
++ p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
++ p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
++ >> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;
++
++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
++ if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
++ /* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
++ clock = (25000000 / 4) * ndiv * p2div / p1div;
++ else
++ /* Fixed reference clock 25MHz and m = 2 */
++ clock = (25000000 / 2) * ndiv * p2div / p1div;
++
++ if (m == BCMA_CC_PMU5_MAINPLL_SSB)
++ clock = clock / 4;
++
++ return clock;
++}
++
+ /* query bus clock frequency for PMU-enabled chipcommon */
+ u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+- case 0x4716:
+- case 0x4748:
+- case 47162:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5356:
++ case BCMA_CHIP_ID_BCM5356:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5357:
+- case 0x4749:
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
+ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_SSB);
+- case 0x5300:
+- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
+- case 53572:
++ case BCMA_CHIP_ID_BCM4706:
++ return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM53572:
+ return 75000000;
+ default:
+- pr_warn("No backplane clock specified for %04X device, "
+- "pmu rev. %d, using default %d Hz\n",
+- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
++ bcma_warn(bus, "No backplane clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+ }
+ return BCMA_CC_PMU_HT_CLOCK;
+ }
+@@ -283,17 +291,21 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+- if (bus->chipinfo.id == 53572)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
+ return 300000000;
+
+ if (cc->pmu.rev >= 5) {
+ u32 pll;
+ switch (bus->chipinfo.id) {
+- case 0x5356:
++ case BCMA_CHIP_ID_BCM4706:
++ return bcma_pmu_clock_bcm4706(cc,
++ BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_CPU);
++ case BCMA_CHIP_ID_BCM5356:
+ pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
+ break;
+- case 0x5357:
+- case 0x4749:
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
+ pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
+ break;
+ default:
+@@ -301,10 +313,188 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+ break;
+ }
+
+- /* TODO: if (bus->chipinfo.id == 0x5300)
+- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
+ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+ }
+
+ return bcma_pmu_get_clockcontrol(cc);
+ }
++
++static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
++ u32 value)
++{
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
++}
++
++void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
++{
++ u32 tmp = 0;
++ u8 phypll_offset = 0;
++ u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5};
++ u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc};
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM53572:
++ /* 5357[ab]0, 43236[ab]0, and 6362b0 */
++
++ /* BCM5357 needs to touch PLL1_PLLCTL[02],
++ so offset PLL0_PLLCTL[02] by 6 */
++ phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
++
++ /* RMW only the P1 divider */
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++ BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++ tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
++ tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++
++ /* RMW only the int feedback divider */
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
++ BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
++ tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++ tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
++ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
++
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43431:
++ if (spuravoid == 2) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0FC00a08);
++ } else if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600a08);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ }
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43421:
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500010);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x000C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x2001E920);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100010);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x000c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++ tmp = 1 << 10;
++ break;
++
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11500060);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x080C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x0F600000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x2001E924);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100060);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x080c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++
++ tmp = 3 << 9;
++ break;
++
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM43428:
++ /* LCNXN */
++ /* PLL Settings for spur avoidance on/off mode,
++ no on2 support for 43228A0 */
++ if (spuravoid == 1) {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x01100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x040C0C06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03140A08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00333333);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x202C2820);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ } else {
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
++ 0x11100014);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
++ 0x040c0c06);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
++ 0x03000a08);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
++ 0x00000000);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
++ 0x200005c0);
++ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
++ 0x88888815);
++ }
++ tmp = 1 << 10;
++ break;
++ default:
++ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++ bus->chipinfo.id);
++ break;
++ }
++
++ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
++ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
++}
++EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
+--- /dev/null
++++ b/drivers/bcma/driver_gmac_cmn.c
+@@ -0,0 +1,14 @@
++/*
++ * Broadcom specific AMBA
++ * GBIT MAC COMMON Core
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
++{
++ mutex_init(&gc->phy_mutex);
++}
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -22,15 +22,15 @@
+ /* The 47162a0 hangs when reading MIPS DMP registers registers */
+ static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+ {
+- return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
+- dev->id.id == BCMA_CORE_MIPS_74K;
++ return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 &&
++ dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K;
+ }
+
+ /* The 5357b0 hangs when reading USB20H DMP registers */
+ static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
+ {
+- return (dev->bus->chipinfo.id == 0x5357 ||
+- dev->bus->chipinfo.id == 0x4749) &&
++ return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
++ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) &&
+ dev->bus->chipinfo.pkg == 11 &&
+ dev->id.id == BCMA_CORE_USB20_HOST;
+ }
+@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc
+ 1 << irqflag);
+ }
+
+- pr_info("set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.id, oldirq + 2, irq + 2);
++ bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq + 2, irq + 2);
+ }
+
+ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+@@ -173,7 +173,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
+ return bcma_pmu_get_clockcpu(&bus->drv_cc);
+
+- pr_err("No PMU available, need this to get the cpu clock\n");
++ bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
+ return 0;
+ }
+ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -185,10 +185,10 @@ static void bcma_core_mips_flash_detect(
+ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ case BCMA_CC_FLASHT_ATSER:
+- pr_err("Serial flash not supported.\n");
++ bcma_err(bus, "Serial flash not supported.\n");
+ break;
+ case BCMA_CC_FLASHT_PARA:
+- pr_info("found parallel flash.\n");
++ bcma_info(bus, "found parallel flash.\n");
+ bus->drv_cc.pflash.window = 0x1c000000;
+ bus->drv_cc.pflash.window_size = 0x02000000;
+
+@@ -199,7 +199,7 @@ static void bcma_core_mips_flash_detect(
+ bus->drv_cc.pflash.buswidth = 2;
+ break;
+ default:
+- pr_err("flash not supported.\n");
++ bcma_err(bus, "flash not supported.\n");
+ }
+ }
+
+@@ -209,7 +209,7 @@ void bcma_core_mips_init(struct bcma_drv
+ struct bcma_device *core;
+ bus = mcore->core->bus;
+
+- pr_info("Initializing MIPS core...\n");
++ bcma_info(bus, "Initializing MIPS core...\n");
+
+ if (!mcore->setup_done)
+ mcore->assigned_irqs = 1;
+@@ -244,7 +244,7 @@ void bcma_core_mips_init(struct bcma_drv
+ break;
+ }
+ }
+- pr_info("IRQ reconfiguration done\n");
++ bcma_info(bus, "IRQ reconfiguration done\n");
+ bcma_core_mips_dump_irq(bus);
+
+ if (mcore->setup_done)
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -2,8 +2,9 @@
}
/**************************************************
-@@ -138,72 +143,90 @@ static void bcma_pcie_mdio_write(struct
+@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
{
}
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
-@@ -236,3 +259,17 @@ out:
+ bool enable)
+ {
+- struct pci_dev *pdev = pc->core->bus->host_pci;
++ struct pci_dev *pdev;
+ u32 coremask, tmp;
+ int err = 0;
+
+- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
++ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
+ * not routed through the PCI core.
+ * So we must not enable routing through the PCI core. */
+ goto out;
+ }
+
++ pdev = pc->core->bus->host_pci;
++
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+ if (err)
+ goto out;
+@@ -236,3 +261,17 @@ out:
return err;
}
EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,588 @@
+@@ -2,13 +2,592 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
+ return false;
+
+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-+ pr_info("This PCI core is disabled and not working\n");
++ bcma_info(bus, "This PCI core is disabled and not working\n");
+ return false;
+ }
+
+ } else {
+ writel(val, mmio);
+
-+ if (chipid == 0x4716 || chipid == 0x4748)
++ if (chipid == BCMA_CHIP_ID_BCM4716 ||
++ chipid == BCMA_CHIP_ID_BCM4748)
+ readl(mmio);
+ }
+
+ */
+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc)
+{
++ struct bcma_bus *bus = pc->core->bus;
+ u8 cap_ptr, root_ctrl, root_cap, dev;
+ u16 val16;
+ int i;
+ udelay(10);
+ }
+ if (val16 == 0x1)
-+ pr_err("PCI: Broken device in slot %d\n", dev);
++ bcma_err(bus, "PCI: Broken device in slot %d\n",
++ dev);
+ }
+ }
+}
+ u32 pci_membase_1G;
+ unsigned long io_map_base;
+
-+ pr_info("PCIEcore in host mode found\n");
++ bcma_info(bus, "PCIEcore in host mode found\n");
+
+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+ if (!pc_host) {
-+ pr_err("can not allocate memory");
++ bcma_err(bus, "can not allocate memory");
+ return;
+ }
+
+ * as mips can't generate 64-bit address on the
+ * backplane.
+ */
-+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) {
+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM);
-+ } else if (bus->chipinfo.id == 0x5300) {
++ } else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM;
+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF;
+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST;
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
+@@ -18,7 +18,7 @@ static void bcma_host_pci_switch_core(st
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+ core->wrap);
+ core->bus->mapped_core = core;
+- pr_debug("Switched to core: 0x%X\n", core->id.id);
++ bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id);
+ }
+
+ /* Provides access to the requested core. Returns base offset that has to be
@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci
.awrite32 = bcma_host_pci_awrite32,
};
{
struct bcma_bus *bus;
int err = -ENOMEM;
+@@ -188,7 +188,7 @@ static int bcma_host_pci_probe(struct pc
+
+ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
+ if (!pci_is_pcie(dev))
+- pr_err("PCI card detected, report problems.\n");
++ bcma_err(bus, "PCI card detected, report problems.\n");
+
+ /* Map MMIO */
+ err = -ENOMEM;
@@ -201,6 +201,9 @@ static int bcma_host_pci_probe(struct pc
bus->hosttype = BCMA_HOSTTYPE_PCI;
bus->ops = &bcma_host_pci_ops;
{
struct bcma_bus *bus = pci_get_drvdata(dev);
-@@ -277,7 +280,7 @@ static struct pci_driver bcma_pci_bridge
+@@ -265,6 +268,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+
+ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+@@ -277,7 +281,7 @@ static struct pci_driver bcma_pci_bridge
.name = "bcma-pci-bridge",
.id_table = bcma_pci_bridge_tbl,
.probe = bcma_host_pci_probe,
static int bcma_bus_match(struct device *dev, struct device_driver *drv);
static int bcma_device_probe(struct device *dev);
static int bcma_device_remove(struct device *dev);
-@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = {
+@@ -55,7 +61,14 @@ static struct bus_type bcma_bus_type = {
.dev_attrs = bcma_device_attrs,
};
-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
++static u16 bcma_cc_core_id(struct bcma_bus *bus)
++{
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ return BCMA_CORE_4706_CHIPCOMMON;
++ return BCMA_CORE_CHIPCOMMON;
++}
++
+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
{
struct bcma_device *core;
-@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +78,7 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +98,18 @@ static int bcma_register_cores(struct bc
+ list_for_each_entry(core, &bus->cores, list) {
+ /* We support that cores ourself */
+ switch (core->id.id) {
++ case BCMA_CORE_4706_CHIPCOMMON:
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
+ case BCMA_CORE_MIPS_74K:
++ case BCMA_CORE_4706_MAC_GBIT_COMMON:
+ continue;
+ }
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct
+@@ -111,8 +127,9 @@ static int bcma_register_cores(struct bc
+
+ err = device_register(&core->dev);
+ if (err) {
+- pr_err("Could not register dev for core 0x%03X\n",
+- core->id.id);
++ bcma_err(bus,
++ "Could not register dev for core 0x%03X\n",
++ core->id.id);
+ continue;
+ }
+ core->dev_registered = true;
+@@ -132,20 +149,24 @@ static void bcma_unregister_cores(struct
}
}
/* Scan for devices (cores) */
err = bcma_bus_scan(bus);
if (err) {
+- pr_err("Failed to scan: %d\n", err);
++ bcma_err(bus, "Failed to scan: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+@@ -165,17 +186,24 @@ int bcma_bus_register(struct bcma_bus *b
+ bcma_core_pci_init(&bus->drv_pci);
+ }
+
++ /* Init GBIT MAC COMMON core */
++ core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++ if (core) {
++ bus->drv_gmac_cmn.core = core;
++ bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
++ }
++
+ /* Try to get SPROM */
+ err = bcma_sprom_get(bus);
+ if (err == -ENOENT) {
+- pr_err("No SPROM available\n");
++ bcma_err(bus, "No SPROM available\n");
+ } else if (err)
+- pr_err("Failed to get SPROM: %d\n", err);
++ bcma_err(bus, "Failed to get SPROM: %d\n", err);
+
+ /* Register found cores */
+ bcma_register_cores(bus);
+
+- pr_info("Bus registered\n");
++ bcma_info(bus, "Bus registered\n");
+
+ return 0;
+ }
+@@ -196,14 +224,14 @@ int __init bcma_bus_early_register(struc
+ bcma_init_bus(bus);
+
+ match.manuf = BCMA_MANUF_BCM;
+- match.id = BCMA_CORE_CHIPCOMMON;
++ match.id = bcma_cc_core_id(bus);
+ match.class = BCMA_CL_SIM;
+ match.rev = BCMA_ANY_REV;
+
+ /* Scan for chip common core */
+ err = bcma_bus_scan_early(bus, &match, core_cc);
+ if (err) {
+- pr_err("Failed to scan for common core: %d\n", err);
++ bcma_err(bus, "Failed to scan for common core: %d\n", err);
+ return -1;
+ }
+
+@@ -215,12 +243,12 @@ int __init bcma_bus_early_register(struc
+ /* Scan for mips core */
+ err = bcma_bus_scan_early(bus, &match, core_mips);
+ if (err) {
+- pr_err("Failed to scan for mips core: %d\n", err);
++ bcma_err(bus, "Failed to scan for mips core: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+@@ -233,7 +261,7 @@ int __init bcma_bus_early_register(struc
+ bcma_core_mips_init(&bus->drv_mips);
+ }
+
+- pr_info("Early bus registered\n");
++ bcma_info(bus, "Early bus registered\n");
+
+ return 0;
+ }
+@@ -259,8 +287,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+ struct bcma_device *core;
+
+ /* Init CC core */
+- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+- if (core) {
++ if (bus->drv_cc.core) {
+ bus->drv_cc.setup_done = false;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -19,7 +19,14 @@ struct bcma_device_id_name {
+@@ -19,15 +19,27 @@ struct bcma_device_id_name {
u16 id;
const char *name;
};
-struct bcma_device_id_name bcma_device_names[] = {
+
+static const struct bcma_device_id_name bcma_arm_device_names[] = {
++ { BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" },
+ { BCMA_CORE_ARM_1176, "ARM 1176" },
+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+ { BCMA_CORE_ARM_CM3, "ARM CM3" },
+
+static const struct bcma_device_id_name bcma_bcm_device_names[] = {
{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
++ { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
++ { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
++ { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
++ { BCMA_CORE_AMEMC, "AMEMC (DDR)" },
++ { BCMA_CORE_ALTA, "ALTA (I2S)" },
{ BCMA_CORE_INVALID, "Invalid" },
{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
-@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_ILINE20, "ILine 20" },
{ BCMA_CORE_SRAM, "SRAM" },
{ BCMA_CORE_SDRAM, "SDRAM" },
{ BCMA_CORE_PCI, "PCI" },
{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
{ BCMA_CORE_V90, "V90" },
{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
-@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n
+@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n
{ BCMA_CORE_PHY_A, "PHY A" },
{ BCMA_CORE_PHY_B, "PHY B" },
{ BCMA_CORE_PHY_G, "PHY G" },
{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
-@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n
+@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n
{ BCMA_CORE_PHY_N, "PHY N" },
{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
-@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n
+@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
{ BCMA_CORE_SHIM, "SHIM" },
{ BCMA_CORE_DEFAULT, "Default" },
};
return "UNKNOWN";
}
-@@ -212,6 +238,17 @@ static struct bcma_device *bcma_find_cor
+@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
-@@ -353,6 +390,7 @@ static int bcma_get_next_core(struct bcm
+@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+- /* we could save addrl of the router
+- if (cid == BCMA_CORE_OOB_ROUTER)
+- */
+- bcma_erom_skip_component(bus, eromptr);
+- return -ENXIO;
++ /* Some specific cores don't need wrappers */
++ switch (core->id.id) {
++ case BCMA_CORE_4706_MAC_GBIT_COMMON:
++ /* Not used yet: case BCMA_CORE_OOB_ROUTER: */
++ break;
++ default:
++ bcma_erom_skip_component(bus, eromptr);
++ return -ENXIO;
++ }
+ }
+
+ if (bcma_erom_is_bridge(bus, eromptr)) {
+@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+ return -EILSEQ;
+ }
+
++ /* First Slave Address Descriptor should be port 0:
++ * the main register space for the core
++ */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
++ if (tmp <= 0) {
++ /* Try again to see if it is a bridge */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_BRIDGE, 0);
++ if (tmp <= 0) {
++ return -EILSEQ;
++ } else {
++ bcma_info(bus, "Bridge found\n");
++ return -ENXIO;
++ }
++ }
++ core->addr = tmp;
++
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+ break;
+ } else {
+ if (i == 0 && j == 0)
+- core->addr = tmp;
++ core->addr1 = tmp;
+ }
+ }
+ }
+@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
if (bus->init_done)
return;
-@@ -363,9 +401,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
-+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
-+ chipinfo->id, chipinfo->rev, chipinfo->pkg);
++ bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ chipinfo->id, chipinfo->rev, chipinfo->pkg);
+
bus->init_done = true;
}
-@@ -392,6 +433,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,6 +460,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
if (!core)
return -ENOMEM;
-@@ -414,6 +456,8 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -414,14 +483,15 @@ int bcma_bus_scan(struct bcma_bus *bus)
core->core_index = core_num++;
bus->nr_cores++;
+ other_core = bcma_find_core_reverse(bus, core->id.id);
+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
- pr_info("Core %d found: %s "
- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- pr_info("Core %d found: %s "
+- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- core->core_index, bcma_device_name(&core->id),
+- core->id.manuf, core->id.id, core->id.rev,
+- core->id.class);
++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ core->core_index, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
+
+- list_add(&core->list, &bus->cores);
++ list_add_tail(&core->list, &bus->cores);
+ }
+
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+@@ -471,13 +541,12 @@ int __init bcma_bus_scan_early(struct bc
+
+ core->core_index = core_num++;
+ bus->nr_cores++;
+- pr_info("Core %d found: %s "
+- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+- core->core_index, bcma_device_name(&core->id),
+- core->id.manuf, core->id.id, core->id.rev,
+- core->id.class);
++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ core->core_index, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
+
+- list_add(&core->list, &bus->cores);
++ list_add_tail(&core->list, &bus->cores);
+ err = 0;
+ break;
+ }
+--- a/drivers/bcma/scan.h
++++ b/drivers/bcma/scan.h
+@@ -27,7 +27,7 @@
+ #define SCAN_CIB_NMW 0x0007C000
+ #define SCAN_CIB_NMW_SHIFT 14
+ #define SCAN_CIB_NSW 0x00F80000
+-#define SCAN_CIB_NSW_SHIFT 17
++#define SCAN_CIB_NSW_SHIFT 19
+ #define SCAN_CIB_REV 0xFF000000
+ #define SCAN_CIB_REV_SHIFT 24
+
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -2,6 +2,8 @@
+ if (err)
+ goto fail;
+
-+ pr_debug("Using SPROM revision %d provided by"
-+ " platform.\n", bus->sprom.revision);
++ bcma_debug(bus, "Using SPROM revision %d provided by platform.\n",
++ bus->sprom.revision);
+ return 0;
+fail:
-+ pr_warn("Using fallback SPROM failed (err %d)\n", err);
++ bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
+ return err;
+}
bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
SSB_SPROM_REVISION_REV;
-@@ -137,85 +216,363 @@ static void bcma_sprom_extract_r8(struct
+@@ -137,102 +216,378 @@ static void bcma_sprom_extract_r8(struct
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
+ /* older chipcommon revisions use chip status register */
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
-+ case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT;
+ break;
+
-+ case 0x4331:
++ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
+
+
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
-+ case 0x4313:
++ case BCMA_CHIP_ID_BCM4313:
+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT;
+ break;
+
-+ case 0x4331:
++ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+
-+ case 43224:
-+ case 43225:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
-@@ -225,11 +582,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
- if (bus->chipinfo.id == 0x4331)
+ if (!sprom)
+ return -ENOMEM;
+
+- if (bus->chipinfo.id == 0x4331)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
-+ pr_debug("SPROM offset 0x%x\n", offset);
++ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
- if (bus->chipinfo.id == 0x4331)
+- if (bus->chipinfo.id == 0x4331)
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+ err = bcma_sprom_valid(sprom);
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -26,6 +26,11 @@ struct bcma_chipinfo {
+@@ -7,6 +7,7 @@
+ #include <linux/bcma/bcma_driver_chipcommon.h>
+ #include <linux/bcma/bcma_driver_pci.h>
+ #include <linux/bcma/bcma_driver_mips.h>
++#include <linux/bcma/bcma_driver_gmac_cmn.h>
+ #include <linux/ssb/ssb.h> /* SPROM sharing */
+
+ #include "bcma_regs.h"
+@@ -26,6 +27,11 @@ struct bcma_chipinfo {
u8 pkg;
};
enum bcma_clkmode {
BCMA_CLKMODE_FAST,
BCMA_CLKMODE_DYNAMIC,
-@@ -136,6 +141,7 @@ struct bcma_device {
+@@ -65,6 +71,13 @@ struct bcma_host_ops {
+
+ /* Core-ID values. */
+ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
++#define BCMA_CORE_4706_CHIPCOMMON 0x500
++#define BCMA_CORE_4706_SOC_RAM 0x50E
++#define BCMA_CORE_4706_MAC_GBIT 0x52D
++#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */
++#define BCMA_CORE_ALTA 0x534 /* I2S core */
++#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC
++#define BCMA_CORE_DDR23_PHY 0x5DD
+ #define BCMA_CORE_INVALID 0x700
+ #define BCMA_CORE_CHIPCOMMON 0x800
+ #define BCMA_CORE_ILINE20 0x801
+@@ -125,6 +138,36 @@ struct bcma_host_ops {
+
+ #define BCMA_MAX_NR_CORES 16
+
++/* Chip IDs of PCIe devices */
++#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43224 43224
++#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
++#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
++#define BCMA_CHIP_ID_BCM43225 43225
++#define BCMA_CHIP_ID_BCM43227 43227
++#define BCMA_CHIP_ID_BCM43228 43228
++#define BCMA_CHIP_ID_BCM43421 43421
++#define BCMA_CHIP_ID_BCM43428 43428
++#define BCMA_CHIP_ID_BCM43431 43431
++#define BCMA_CHIP_ID_BCM43460 43460
++#define BCMA_CHIP_ID_BCM4331 0x4331
++#define BCMA_CHIP_ID_BCM6362 0x6362
++#define BCMA_CHIP_ID_BCM4360 0x4360
++#define BCMA_CHIP_ID_BCM4352 0x4352
++
++/* Chip IDs of SoCs */
++#define BCMA_CHIP_ID_BCM4706 0x5300
++#define BCMA_CHIP_ID_BCM4716 0x4716
++#define BCMA_PKG_ID_BCM4716 8
++#define BCMA_PKG_ID_BCM4717 9
++#define BCMA_PKG_ID_BCM4718 10
++#define BCMA_CHIP_ID_BCM47162 47162
++#define BCMA_CHIP_ID_BCM4748 0x4748
++#define BCMA_CHIP_ID_BCM4749 0x4749
++#define BCMA_CHIP_ID_BCM5356 0x5356
++#define BCMA_CHIP_ID_BCM5357 0x5357
++#define BCMA_CHIP_ID_BCM53572 53572
++
+ struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
+@@ -136,8 +179,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
+ u8 core_unit;
u32 addr;
++ u32 addr1;
u32 wrap;
-@@ -175,6 +181,12 @@ int __bcma_driver_register(struct bcma_d
+
+ void __iomem *io_addr;
+@@ -175,6 +220,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -191,10 +203,13 @@ struct bcma_bus {
+@@ -191,14 +242,18 @@ struct bcma_bus {
struct bcma_chipinfo chipinfo;
struct bcma_drv_cc drv_cc;
struct bcma_drv_pci drv_pci;
-@@ -282,6 +297,7 @@ static inline void bcma_maskset16(struct
+ struct bcma_drv_mips drv_mips;
++ struct bcma_drv_gmac_cmn drv_gmac_cmn;
+
+ /* We decided to share SPROM struct with SSB as long as we do not need
+ * any hacks for BCMA. This simplifies drivers code. */
+@@ -282,6 +337,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +84,10 @@
+@@ -79,6 +84,15 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
++#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
++#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
++#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
++#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
++#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -181,6 +190,22 @@
+@@ -181,6 +195,22 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +265,6 @@
+@@ -240,7 +270,6 @@
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
+@@ -256,6 +285,15 @@
+
+ /* 4706 PMU */
+ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0
++#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */
++#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000
++#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16
++#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000
++#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12
++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8
++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+@@ -284,6 +322,19 @@
+ #define BCMA_CC_PPL_PCHI_OFF 5
+ #define BCMA_CC_PPL_PCHI_MASK 0x0000003f
+
++#define BCMA_CC_PMU_PLL_CTL0 0
++#define BCMA_CC_PMU_PLL_CTL1 1
++#define BCMA_CC_PMU_PLL_CTL2 2
++#define BCMA_CC_PMU_PLL_CTL3 3
++#define BCMA_CC_PMU_PLL_CTL4 4
++#define BCMA_CC_PMU_PLL_CTL5 5
++
++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
++#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20
++
++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
++#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
++
+ /* BCM4331 ChipControl numbers. */
+ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
+ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
+@@ -297,9 +348,18 @@
+ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
+ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
+ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
++#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */
+ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
+ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+
++/* 43224 chip-specific ChipControl register bits */
++#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */
++#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */
++#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */
++
++/* 4313 Chip specific ChipControl register bits */
++#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -387,5 +447,6 @@ extern void bcma_chipco_chipctl_maskset(
+ u32 offset, u32 mask, u32 set);
+ extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set);
++extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
+@@ -0,0 +1,100 @@
++#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_
++#define LINUX_BCMA_DRIVER_GMAC_CMN_H_
++
++#include <linux/types.h>
++
++#define BCMA_GMAC_CMN_STAG0 0x000
++#define BCMA_GMAC_CMN_STAG1 0x004
++#define BCMA_GMAC_CMN_STAG2 0x008
++#define BCMA_GMAC_CMN_STAG3 0x00C
++#define BCMA_GMAC_CMN_PARSER_CTL 0x020
++#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024
++#define BCMA_GMAC_CMN_PHY_ACCESS 0x100
++#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff
++#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000
++#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16
++#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000
++#define BCMA_GMAC_CMN_PA_REG_SHIFT 24
++#define BCMA_GMAC_CMN_PA_WRITE 0x20000000
++#define BCMA_GMAC_CMN_PA_START 0x40000000
++#define BCMA_GMAC_CMN_PHY_CTL 0x104
++#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f
++#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000
++#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16
++#define BCMA_GMAC_CMN_PC_MTE 0x00800000
++#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110
++#define BCMA_GMAC_CMN_CFP_ACCESS 0x200
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228
++#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248
++#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C
++#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250
++#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0
++#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4
++#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8
++#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC
++#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0
++#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300
++#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304
++#define BCMA_GMAC_CMN_UDF_0_A8 0x308
++#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310
++#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314
++#define BCMA_GMAC_CMN_UDF_1_A8 0x318
++#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320
++#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324
++#define BCMA_GMAC_CMN_UDF_2_A8 0x328
++#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330
++#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334
++#define BCMA_GMAC_CMN_UDF_0_B8 0x338
++#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340
++#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344
++#define BCMA_GMAC_CMN_UDF_1_B8 0x348
++#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350
++#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354
++#define BCMA_GMAC_CMN_UDF_2_B8 0x358
++#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360
++#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364
++#define BCMA_GMAC_CMN_UDF_0_C8 0x368
++#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370
++#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374
++#define BCMA_GMAC_CMN_UDF_1_C8 0x378
++#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380
++#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384
++#define BCMA_GMAC_CMN_UDF_2_C8 0x388
++#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390
++#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394
++#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394
++
++struct bcma_drv_gmac_cmn {
++ struct bcma_device *core;
++
++ /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and
++ * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */
++ struct mutex phy_mutex;
++};
++
++/* Register access */
++#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset)
++#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset)
++#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val)
++#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val)
++
++#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
++extern void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
++#else
++static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
++#endif
++
++#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;