+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -29,11 +29,14 @@ static const struct pci_device_id b43_pc
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
+ { 0, },
+ };
+ MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -13,6 +13,9 @@
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+@@ -190,16 +190,32 @@ static void ssb_mips_flash_detect(struct
+ {
+ struct ssb_bus *bus = mcore->dev->bus;
+
+- mcore->flash_buswidth = 2;
+- if (bus->chipco.dev) {
+- mcore->flash_window = 0x1c000000;
+- mcore->flash_window_size = 0x02000000;
++ /* When there is no chipcommon on the bus there is 4MB flash */
++ if (!bus->chipco.dev) {
++ mcore->pflash.present = true;
++ mcore->pflash.buswidth = 2;
++ mcore->pflash.window = SSB_FLASH1;
++ mcore->pflash.window_size = SSB_FLASH1_SZ;
++ return;
++ }
++
++ /* There is ChipCommon, so use it to read info about flash */
++ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ case SSB_CHIPCO_FLASHT_ATSER:
++ pr_err("Serial flash not supported\n");
++ break;
++ case SSB_CHIPCO_FLASHT_PARA:
++ pr_debug("Found parallel flash\n");
++ mcore->pflash.present = true;
++ mcore->pflash.window = SSB_FLASH2;
++ mcore->pflash.window_size = SSB_FLASH2_SZ;
+ if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+ & SSB_CHIPCO_CFG_DS16) == 0)
+- mcore->flash_buswidth = 1;
+- } else {
+- mcore->flash_window = 0x1fc00000;
+- mcore->flash_window_size = 0x00400000;
++ mcore->pflash.buswidth = 1;
++ else
++ mcore->pflash.buswidth = 2;
++ break;
+ }
+ }
+
+@@ -208,6 +224,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
struct ssb_bus *bus = mcore->dev->bus;
u32 pll_type, n, m, rate = 0;
&clkctl_n, &clkctl_m);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss
+@@ -178,6 +178,18 @@ err_pci:
+ #define SPEX(_outvar, _offset, _mask, _shift) \
+ SPEX16(_outvar, _offset, _mask, _shift)
+
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
++ do { \
++ SPEX(_field[0], _offset + 0, _mask, _shift); \
++ SPEX(_field[1], _offset + 2, _mask, _shift); \
++ SPEX(_field[2], _offset + 4, _mask, _shift); \
++ SPEX(_field[3], _offset + 6, _mask, _shift); \
++ SPEX(_field[4], _offset + 8, _mask, _shift); \
++ SPEX(_field[5], _offset + 10, _mask, _shift); \
++ SPEX(_field[6], _offset + 12, _mask, _shift); \
++ SPEX(_field[7], _offset + 14, _mask, _shift); \
++ } while (0)
++
+
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
{
int i;
u16 v;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
-@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss
+@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
+- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+- SSB_SPROM1_BINF_CCODE_SHIFT);
++ if (out->revision == 1)
++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
++ SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
+ SSB_SPROM1_BINF_ANTA_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
+@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+ if (out->revision >= 2)
SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
/* Extract the antenna gain values. */
- gain = r123_extract_antgain(out->revision, in,
}
/* Revs 4 5 and 8 have partially shared layout */
-@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb
+@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
+ if (out->revision == 4) {
+- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
+ } else {
+- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
sprom_extract_r458(out, in);
-@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb
+@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
/* extract the MAC address */
for (i = 0; i < 3; i++) {
-@@ -596,16 +591,46 @@ static void sprom_extract_r8(struct ssb_
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+@@ -596,16 +611,46 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
/* Extract FEM info */
SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+@@ -630,6 +675,63 @@ static void sprom_extract_r8(struct ssb_
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++ SSB_SPROM8_LEDDC_ON_SHIFT);
++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++ SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++ SSB_SPROM8_THERMAL_TRESH_SHIFT);
++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_PHYCAL,
++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
+ sprom_extract_r458(out, in);
+
+ /* TODO - get remaining rev 8 stuff needed */
+@@ -759,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct
+ {
+ bi->vendor = bus->host_pci->subsystem_vendor;
+ bi->type = bus->host_pci->subsystem_device;
+- bi->rev = bus->host_pci->revision;
+ }
+
+ int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
-@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid)
+ return "ARM 1176";
+ case SSB_DEV_ARM_7TDMI:
+ return "ARM 7TDMI";
++ case SSB_DEV_ARM_CM3:
++ return "ARM Cortex M3";
+ }
+ return "UNKNOWN";
+ }
+@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
} antenna_gain;
struct {
-@@ -103,7 +109,79 @@ struct ssb_sprom {
+@@ -103,14 +109,85 @@ struct ssb_sprom {
} ghz5;
} fem;
};
/* Information about the PCB the circuitry is soldered on. */
+ struct ssb_boardinfo {
+ u16 vendor;
+ u16 type;
+- u8 rev;
+ };
+
+
+@@ -166,6 +243,7 @@ struct ssb_bus_ops {
+ #define SSB_DEV_MINI_MACPHY 0x823
+ #define SSB_DEV_ARM_1176 0x824
+ #define SSB_DEV_ARM_7TDMI 0x825
++#define SSB_DEV_ARM_CM3 0x82A
+
+ /* Vendor-ID values */
+ #define SSB_VENDOR_BROADCOM 0x4243
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -504,7 +504,9 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
+
+ /* Status register bits for ST flashes */
+ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -2,6 +2,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -13,6 +13,12 @@ struct ssb_serial_port {
+ unsigned int reg_shift;
+ };
+
++struct ssb_pflash {
++ bool present;
++ u8 buswidth;
++ u32 window;
++ u32 window_size;
++};
+
+ struct ssb_mipscore {
+ struct ssb_device *dev;
+@@ -20,9 +26,7 @@ struct ssb_mipscore {
+ int nr_serial_ports;
+ struct ssb_serial_port serial_ports[4];
+
+- u8 flash_buswidth;
+- u32 flash_window;
+- u32 flash_window_size;
++ struct ssb_pflash pflash;
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -449,6 +449,39 @@
- #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
- #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
- #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
+@@ -228,6 +228,7 @@
+ #define SSB_SPROM1_AGAIN_BG_SHIFT 0
+ #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_AGAIN_A_SHIFT 8
++#define SSB_SPROM1_CCODE 0x0076
+
+ /* SPROM Revision 2 (inherits from rev 1) */
+ #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+@@ -267,6 +268,7 @@
+ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+ /* SPROM Revision 4 */
++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */
+ #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+ #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+ #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
+@@ -389,6 +391,11 @@
+ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM8_GPIOB_P3_SHIFT 8
++#define SSB_SPROM8_LEDDC 0x009A
++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */
++#define SSB_SPROM8_LEDDC_ON_SHIFT 8
++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */
++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
+ #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+ #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+ #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+@@ -404,6 +411,13 @@
+ #define SSB_SPROM8_AGAIN2_SHIFT 0
+ #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM8_AGAIN3_SHIFT 8
++#define SSB_SPROM8_TXRXC 0x00A2
++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
++#define SSB_SPROM8_TXRXC_SWITCH 0xff00
++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
+ #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
+ #define SSB_SPROM8_RSSISMF2G 0x000F
+ #define SSB_SPROM8_RSSISMC2G 0x00F0
+@@ -430,6 +444,7 @@
+ #define SSB_SPROM8_TRI5GH_SHIFT 8
+ #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
+ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
++#define SSB_SPROM8_RXPO2G_SHIFT 0
+ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+ #define SSB_SPROM8_RXPO5G_SHIFT 8
+ #define SSB_SPROM8_FEM2G 0x00AE
+@@ -445,10 +460,71 @@
+ #define SSB_SROM8_FEM_ANTSWLUT 0xF800
+ #define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
+ #define SSB_SPROM8_THERMAL 0x00B2
+-#define SSB_SPROM8_MPWR_RAWTS 0x00B4
+-#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+-#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+-#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
++#define SSB_SPROM8_THERMAL_TRESH 0xff00
++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
++/* Temp sense related entries */
++#define SSB_SPROM8_RAWTS 0x00B4
++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
++#define SSB_SPROM8_OPT_CORRX 0x00B6
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
++#define SSB_SPROM8_TEMPDELTA 0x00BA
++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -473,6 +506,7 @@
+@@ -473,12 +549,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+
++#define SSB_SPROM8_2G_MCSPO 0x0152
++#define SSB_SPROM8_5G_MCSPO 0x0162
++#define SSB_SPROM8_5GL_MCSPO 0x0172
++#define SSB_SPROM8_5GH_MCSPO 0x0182
++
++#define SSB_SPROM8_CDDPO 0x0192
++#define SSB_SPROM8_STBCPO 0x0194
++#define SSB_SPROM8_BW40PO 0x0196
++#define SSB_SPROM8_BWDUPPO 0x0198
++
+ /* Values for boardflags_lo read from SPROM */
+ #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+ #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */