+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -29,11 +29,14 @@ static const struct pci_device_id b43_pc
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
+ { 0, },
+ };
+ MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -13,6 +13,9 @@
+ #include <linux/ssb/ssb_driver_chipcommon.h>
+ #include <linux/delay.h>
+ #include <linux/export.h>
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
++#endif
+
+ #include "ssb_private.h"
+
+@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s
+ u32 pmuctl, tmp, pllctl;
+ unsigned int i;
+
+- if ((bus->chip_id == 0x5354) && !crystalfreq) {
+- /* The 5354 crystal freq is 25MHz */
+- crystalfreq = 25000;
+- }
+ if (crystalfreq)
+ e = pmu0_plltab_find_entry(crystalfreq);
+ if (!e)
+@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+- /* TODO: The user may override the crystal frequency. */
++#ifdef CONFIG_BCM47XX
++ char buf[20];
++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
++ crystalfreq = simple_strtoul(buf, NULL, 0);
++#endif
+ }
+
+ switch (bus->chip_id) {
+@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
+ break;
+ case 0x4328:
++ ssb_pmu0_pllinit_r0(cc, crystalfreq);
++ break;
+ case 0x5354:
++ if (crystalfreq == 0)
++ crystalfreq = 25000;
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
+ case 0x4322:
+@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
++
++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x5354:
++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
++ return 240000000;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
++ return 0;
++ }
++}
++
++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x5354:
++ return 120000000;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
++ return 0;
++ }
++}
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -190,16 +190,32 @@ static void ssb_mips_flash_detect(struct
+ {
+ struct ssb_bus *bus = mcore->dev->bus;
+
+- mcore->flash_buswidth = 2;
+- if (bus->chipco.dev) {
+- mcore->flash_window = 0x1c000000;
+- mcore->flash_window_size = 0x02000000;
++ /* When there is no chipcommon on the bus there is 4MB flash */
++ if (!bus->chipco.dev) {
++ mcore->pflash.present = true;
++ mcore->pflash.buswidth = 2;
++ mcore->pflash.window = SSB_FLASH1;
++ mcore->pflash.window_size = SSB_FLASH1_SZ;
++ return;
++ }
++
++ /* There is ChipCommon, so use it to read info about flash */
++ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ case SSB_CHIPCO_FLASHT_ATSER:
++ pr_err("Serial flash not supported\n");
++ break;
++ case SSB_CHIPCO_FLASHT_PARA:
++ pr_debug("Found parallel flash\n");
++ mcore->pflash.present = true;
++ mcore->pflash.window = SSB_FLASH2;
++ mcore->pflash.window_size = SSB_FLASH2_SZ;
+ if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+ & SSB_CHIPCO_CFG_DS16) == 0)
+- mcore->flash_buswidth = 1;
+- } else {
+- mcore->flash_window = 0x1fc00000;
+- mcore->flash_window_size = 0x00400000;
++ mcore->pflash.buswidth = 1;
++ else
++ mcore->pflash.buswidth = 2;
++ break;
+ }
+ }
+
+@@ -208,6 +224,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ struct ssb_bus *bus = mcore->dev->bus;
+ u32 pll_type, n, m, rate = 0;
+
++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_cpu_clock(&bus->chipco);
++
+ if (bus->extif.dev) {
+ ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+ } else if (bus->chipco.dev) {
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de
+ put_device(dev->dev);
+ }
+
+-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+-{
+- if (drv)
+- get_driver(&drv->drv);
+- return drv;
+-}
+-
+-static inline void ssb_driver_put(struct ssb_driver *drv)
+-{
+- if (drv)
+- put_driver(&drv->drv);
+-}
+-
+ static int ssb_device_resume(struct device *dev)
+ {
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b
+ ssb_device_put(sdev);
+ continue;
+ }
+- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+- ssb_device_put(sdev);
++ sdrv = drv_to_ssb_drv(sdev->dev->driver);
++ if (SSB_WARN_ON(!sdrv->remove))
+ continue;
+- }
+ sdrv->remove(sdev);
+ ctx->device_frozen[i] = 1;
+ }
+@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c
+ dev_name(sdev->dev));
+ result = err;
+ }
+- ssb_driver_put(sdrv);
+ ssb_device_put(sdev);
+ }
+
+@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+ u32 plltype;
+ u32 clkctl_n, clkctl_m;
+
++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_controlclock(&bus->chipco);
++
+ if (ssb_extif_available(&bus->extif))
+ ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+ &clkctl_n, &clkctl_m);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb
+@@ -178,6 +178,18 @@ err_pci:
+ #define SPEX(_outvar, _offset, _mask, _shift) \
+ SPEX16(_outvar, _offset, _mask, _shift)
+
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
++ do { \
++ SPEX(_field[0], _offset + 0, _mask, _shift); \
++ SPEX(_field[1], _offset + 2, _mask, _shift); \
++ SPEX(_field[2], _offset + 4, _mask, _shift); \
++ SPEX(_field[3], _offset + 6, _mask, _shift); \
++ SPEX(_field[4], _offset + 8, _mask, _shift); \
++ SPEX(_field[5], _offset + 10, _mask, _shift); \
++ SPEX(_field[6], _offset + 12, _mask, _shift); \
++ SPEX(_field[7], _offset + 14, _mask, _shift); \
++ } while (0)
++
+
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
+ {
+ int i;
+ u16 v;
+- s8 gain;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
+- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+- SSB_SPROM1_BINF_CCODE_SHIFT);
++ if (out->revision == 1)
++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
++ SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
+ SSB_SPROM1_BINF_ANTA_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
+@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+ if (out->revision >= 2)
+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+ /* Extract the antenna gain values. */
+- gain = r123_extract_antgain(out->revision, in,
+- SSB_SPROM1_AGAIN_BG,
+- SSB_SPROM1_AGAIN_BG_SHIFT);
+- out->antenna_gain.ghz24.a0 = gain;
+- out->antenna_gain.ghz24.a1 = gain;
+- out->antenna_gain.ghz24.a2 = gain;
+- out->antenna_gain.ghz24.a3 = gain;
+- gain = r123_extract_antgain(out->revision, in,
+- SSB_SPROM1_AGAIN_A,
+- SSB_SPROM1_AGAIN_A_SHIFT);
+- out->antenna_gain.ghz5.a0 = gain;
+- out->antenna_gain.ghz5.a1 = gain;
+- out->antenna_gain.ghz5.a2 = gain;
+- out->antenna_gain.ghz5.a3 = gain;
++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++ SSB_SPROM1_AGAIN_BG,
++ SSB_SPROM1_AGAIN_BG_SHIFT);
++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++ SSB_SPROM1_AGAIN_A,
++ SSB_SPROM1_AGAIN_A_SHIFT);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
+ if (out->revision == 4) {
+- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
+ } else {
+- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
+ }
+
+ /* Extract the antenna gain values. */
+- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
+- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
+- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
+- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
+- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+- sizeof(out->antenna_gain.ghz5));
+
+ sprom_extract_r458(out, in);
+
+@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
/* extract the MAC address */
for (i = 0; i < 3; i++) {
-@@ -607,6 +613,38 @@ static void sprom_extract_r8(struct ssb_
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+@@ -596,16 +611,46 @@ static void sprom_extract_r8(struct ssb_
+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+ /* Extract the antenna gain values. */
+- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+- sizeof(out->antenna_gain.ghz5));
++
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
-+
+
/* Extract FEM info */
SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
- SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+@@ -630,6 +675,63 @@ static void sprom_extract_r8(struct ssb_
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++ SSB_SPROM8_LEDDC_ON_SHIFT);
++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++ SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++ SSB_SPROM8_THERMAL_TRESH_SHIFT);
++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_PHYCAL,
++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
+ sprom_extract_r458(out, in);
+
+ /* TODO - get remaining rev 8 stuff needed */
+@@ -759,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct
+ {
+ bi->vendor = bus->host_pci->subsystem_vendor;
+ bi->type = bus->host_pci->subsystem_device;
+- bi->rev = bus->host_pci->revision;
+ }
+
+ int ssb_pci_get_invariants(struct ssb_bus *bus,
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++ sprom->antenna_gain.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.a3 = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid)
+ return "ARM 1176";
+ case SSB_DEV_ARM_7TDMI:
+ return "ARM 7TDMI";
++ case SSB_DEV_ARM_CM3:
++ return "ARM Cortex M3";
+ }
+ return "UNKNOWN";
+ }
+@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
++ "package 0x%02X\n", bus->chip_id, bus->chip_rev,
++ bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+--- a/drivers/ssb/sdio.c
++++ b/drivers/ssb/sdio.c
+@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
+ case SSB_SDIO_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++ sprom->antenna_gain.a0 = tuple->data[1];
++ sprom->antenna_gain.a1 = tuple->data[1];
++ sprom->antenna_gain.a2 = tuple->data[1];
++ sprom->antenna_gain.a3 = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->size != 3) &&
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex
+ }
+ #endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+
++/* driver_chipcommon_pmu.c */
++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
++
+ #endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -16,6 +16,12 @@ struct pcmcia_device;
+struct ssb_sprom_core_pwr_info {
+ u8 itssi_2g, itssi_5g;
+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
-+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
+};
+
struct ssb_sprom {
u8 revision;
u8 il0mac[6]; /* MAC address for 802.11b/g */
-@@ -82,6 +88,8 @@ struct ssb_sprom {
+@@ -26,9 +32,12 @@ struct ssb_sprom {
+ u8 et0mdcport; /* MDIO for enet0 */
+ u8 et1mdcport; /* MDIO for enet1 */
+ u16 board_rev; /* Board revision number from SPROM. */
++ u16 board_num; /* Board number from SPROM. */
++ u16 board_type; /* Board type from SPROM. */
+ u8 country_code; /* Country Code */
+- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
+- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
++ char alpha2[2]; /* Country Code as two chars like EU or US */
++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
+ u16 pa0b0;
+@@ -47,10 +56,10 @@ struct ssb_sprom {
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+ u8 tri2g; /* 2.4GHz TX isolation */
+@@ -61,8 +70,8 @@ struct ssb_sprom {
+ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
+ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
+ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
+- u8 rxpo2g; /* 2GHz RX power offset */
+- u8 rxpo5g; /* 5GHz RX power offset */
++ s8 rxpo2g; /* 2GHz RX power offset */
++ s8 rxpo5g; /* 5GHz RX power offset */
+ u8 rssisav2g; /* 2GHz RSSI params */
+ u8 rssismc2g;
+ u8 rssismf2g;
+@@ -82,16 +91,13 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
+ struct {
+- struct {
+- s8 a0, a1, a2, a3;
+- } ghz24; /* 2.4GHz band */
+- struct {
+- s8 a0, a1, a2, a3;
+- } ghz5; /* 5GHz band */
++ s8 a0, a1, a2, a3;
+ } antenna_gain;
+
+ struct {
+@@ -103,14 +109,85 @@ struct ssb_sprom {
+ } ghz5;
+ } fem;
+
+- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
++ u16 mcs2gpo[8];
++ u16 mcs5gpo[8];
++ u16 mcs5glpo[8];
++ u16 mcs5ghpo[8];
++ u8 opo;
++
++ u8 rxgainerr2ga[3];
++ u8 rxgainerr5gla[3];
++ u8 rxgainerr5gma[3];
++ u8 rxgainerr5gha[3];
++ u8 rxgainerr5gua[3];
++
++ u8 noiselvl2ga[3];
++ u8 noiselvl5gla[3];
++ u8 noiselvl5gma[3];
++ u8 noiselvl5gha[3];
++ u8 noiselvl5gua[3];
++
++ u8 regrev;
++ u8 txchain;
++ u8 rxchain;
++ u8 antswitch;
++ u16 cddpo;
++ u16 stbcpo;
++ u16 bw40po;
++ u16 bwduppo;
++
++ u8 tempthresh;
++ u8 tempoffset;
++ u16 rawtempsense;
++ u8 measpower;
++ u8 tempsense_slope;
++ u8 tempcorrx;
++ u8 tempsense_option;
++ u8 freqoffset_corr;
++ u8 iqcal_swp_dis;
++ u8 hw_iqcal_en;
++ u8 elna2g;
++ u8 elna5g;
++ u8 phycal_tempdelta;
++ u8 temps_period;
++ u8 temps_hysteresis;
++ u8 measpower1;
++ u8 measpower2;
++ u8 pcieingress_war;
++
++ /* power per rate from sromrev 9 */
++ u16 cckbw202gpo;
++ u16 cckbw20ul2gpo;
++ u32 legofdmbw202gpo;
++ u32 legofdmbw20ul2gpo;
++ u32 legofdmbw205glpo;
++ u32 legofdmbw20ul5glpo;
++ u32 legofdmbw205gmpo;
++ u32 legofdmbw20ul5gmpo;
++ u32 legofdmbw205ghpo;
++ u32 legofdmbw20ul5ghpo;
++ u32 mcsbw202gpo;
++ u32 mcsbw20ul2gpo;
++ u32 mcsbw402gpo;
++ u32 mcsbw205glpo;
++ u32 mcsbw20ul5glpo;
++ u32 mcsbw405glpo;
++ u32 mcsbw205gmpo;
++ u32 mcsbw20ul5gmpo;
++ u32 mcsbw405gmpo;
++ u32 mcsbw205ghpo;
++ u32 mcsbw20ul5ghpo;
++ u32 mcsbw405ghpo;
++ u16 mcs32po;
++ u16 legofdm40duppo;
++ u8 sar2g;
++ u8 sar5g;
+ };
+
+ /* Information about the PCB the circuitry is soldered on. */
+ struct ssb_boardinfo {
+ u16 vendor;
+ u16 type;
+- u8 rev;
+ };
+
+
+@@ -166,6 +243,7 @@ struct ssb_bus_ops {
+ #define SSB_DEV_MINI_MACPHY 0x823
+ #define SSB_DEV_ARM_1176 0x824
+ #define SSB_DEV_ARM_7TDMI 0x825
++#define SSB_DEV_ARM_CM3 0x82A
+
+ /* Vendor-ID values */
+ #define SSB_VENDOR_BROADCOM 0x4243
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -504,7 +504,9 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
+
+ /* Status register bits for ST flashes */
+ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -2,6 +2,7 @@
+ #define LINUX_SSB_DRIVER_GIGE_H_
+
+ #include <linux/ssb/ssb.h>
++#include <linux/bug.h>
+ #include <linux/pci.h>
+ #include <linux/spinlock.h>
+
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -13,6 +13,12 @@ struct ssb_serial_port {
+ unsigned int reg_shift;
+ };
+
++struct ssb_pflash {
++ bool present;
++ u8 buswidth;
++ u32 window;
++ u32 window_size;
++};
+
+ struct ssb_mipscore {
+ struct ssb_device *dev;
+@@ -20,9 +26,7 @@ struct ssb_mipscore {
+ int nr_serial_ports;
+ struct ssb_serial_port serial_ports[4];
+
+- u8 flash_buswidth;
+- u32 flash_window;
+- u32 flash_window_size;
++ struct ssb_pflash pflash;
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -449,6 +449,39 @@
- #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
- #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
- #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
+@@ -228,6 +228,7 @@
+ #define SSB_SPROM1_AGAIN_BG_SHIFT 0
+ #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_AGAIN_A_SHIFT 8
++#define SSB_SPROM1_CCODE 0x0076
+
+ /* SPROM Revision 2 (inherits from rev 1) */
+ #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+@@ -267,6 +268,7 @@
+ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+ /* SPROM Revision 4 */
++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */
+ #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+ #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+ #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
+@@ -389,6 +391,11 @@
+ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM8_GPIOB_P3_SHIFT 8
++#define SSB_SPROM8_LEDDC 0x009A
++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */
++#define SSB_SPROM8_LEDDC_ON_SHIFT 8
++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */
++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
+ #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+ #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+ #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+@@ -404,6 +411,13 @@
+ #define SSB_SPROM8_AGAIN2_SHIFT 0
+ #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM8_AGAIN3_SHIFT 8
++#define SSB_SPROM8_TXRXC 0x00A2
++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
++#define SSB_SPROM8_TXRXC_SWITCH 0xff00
++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
+ #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
+ #define SSB_SPROM8_RSSISMF2G 0x000F
+ #define SSB_SPROM8_RSSISMC2G 0x00F0
+@@ -430,6 +444,7 @@
+ #define SSB_SPROM8_TRI5GH_SHIFT 8
+ #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
+ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
++#define SSB_SPROM8_RXPO2G_SHIFT 0
+ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+ #define SSB_SPROM8_RXPO5G_SHIFT 8
+ #define SSB_SPROM8_FEM2G 0x00AE
+@@ -445,10 +460,71 @@
+ #define SSB_SROM8_FEM_ANTSWLUT 0xF800
+ #define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
+ #define SSB_SPROM8_THERMAL 0x00B2
+-#define SSB_SPROM8_MPWR_RAWTS 0x00B4
+-#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+-#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+-#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
++#define SSB_SPROM8_THERMAL_TRESH 0xff00
++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
++/* Temp sense related entries */
++#define SSB_SPROM8_RAWTS 0x00B4
++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
++#define SSB_SPROM8_OPT_CORRX 0x00B6
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
++#define SSB_SPROM8_TEMPDELTA 0x00BA
++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -473,6 +506,7 @@
+@@ -473,12 +549,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+
++#define SSB_SPROM8_2G_MCSPO 0x0152
++#define SSB_SPROM8_5G_MCSPO 0x0162
++#define SSB_SPROM8_5GL_MCSPO 0x0172
++#define SSB_SPROM8_5GH_MCSPO 0x0182
++
++#define SSB_SPROM8_CDDPO 0x0192
++#define SSB_SPROM8_STBCPO 0x0194
++#define SSB_SPROM8_BW40PO 0x0196
++#define SSB_SPROM8_BWDUPPO 0x0198
++
+ /* Values for boardflags_lo read from SPROM */
+ #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+ #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */