# Cook a "WRGG" image, this board is apparently one in the D-Link
# WRGG family and uses the exact same firmware format as other
# D-Link devices.
-define Build/dir685-images
- mkwrggimg -i $(IMAGE_KERNEL) \
- -o $(BIN_DIR)/$(IMG_PREFIX)-dir685-fwupdate.bin \
+define Build/dir685-image
+ mkwrggimg -i $@ \
+ -o $@.new \
-d /dev/mtdblock/1 \
-s wrgns01_dlwbr_dir685RBWW \
-v 'N/A' \
-m dir685 \
-B 96bb
+
+ mv $@.new $@
+endef
+
+# Padding added after the rootfs to an even 128k boundary
+# as this is 128k eraseblocks flash.
+define Build/dir685-pad-rootfs
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 128 >>$@
endef
# Build D-Link DNS-313 images using the special header tool.
# to satisfy the boot loader on the device. The zImage is
# the only real content.
define Build/dns313-images
- if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
- mkdir -p $(BIN_DIR)/.boot
- echo "dummy" > $(BIN_DIR)/.boot/dummyfile
- dns313-header $(BIN_DIR)/.boot/dummyfile \
- $(BIN_DIR)/.boot/rootfs.tgz
- dns313-header $(BIN_DIR)/.boot/dummyfile \
- $(BIN_DIR)/.boot/rd.gz
+ mkdir -p $@.tmp/.boot
+ chmod 755 $@.tmp/.boot
+
+ echo "dummy" > $@.tmp/dummyfile
+
+ dns313-header $@.tmp/dummyfile \
+ $@.tmp/.boot/rootfs.tgz
+ dns313-header $@.tmp/dummyfile \
+ $@.tmp/.boot/rd.gz
dns313-header $(IMAGE_KERNEL) \
- $(BIN_DIR)/.boot/zImage
- rm -f $(BIN_DIR)/.boot/dummyfile
- (cd $(BIN_DIR); tar -czf $(IMG_PREFIX)-dns313-bootpart.tar.gz .boot)
- if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
+ $@.tmp/.boot/zImage
+
+ rm $@.tmp/dummyfile
+
+ genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
+ --size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
+ --squash-uids \
+ --root $@.tmp $@.tmp-boot
+
+ # The device firmware needs revision 1 of EXT2
+ tune2fs -O filetype $@.tmp-boot
+ e2fsck -pDf $@.tmp-boot > /dev/null
+
+ ./dns313_gen_hdd_img.sh $@ $@.tmp-boot $(IMAGE_ROOTFS) \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE)
+
+ rm -rf $@.tmp
endef
-# Create the special NAS4220B image format with the squashfs
-# split across two "partitions" named rd.gz and hddapp.tgz but
-# essentially just being used by OpenWRT as one big partition
-define Build/nas4220b-images
- dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/rd.gz bs=6144k conv=sync
- dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/hddapp.tgz bs=6144k count=1 seek=1
- cp $(IMAGE_KERNEL) $(BIN_DIR)/zImage
- cp ./ImageInfo-ib4220 $(BIN_DIR)/ImageInfo
- (cd $(BIN_DIR); tar -czf $(IMG_PREFIX)-sysupgrade-ib4220b.tar.gz ImageInfo zImage rd.gz hddapp.tgz)
- mv $(BIN_DIR)/rd.gz $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-rd.gz
- mv $(BIN_DIR)/hddapp.tgz $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-hddapp.tgz
- mv $(BIN_DIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-nas4220b-zImage
- rm -f $(BIN_DIR)/ImageInfo
+define Build/wiligear-image
+ $(STAGING_DIR_HOST)/bin/mkfwimage2 \
+ -m GEOS -f 0x30000000 -z \
+ -v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
+ -p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
+ -p Ramdisk:0x120000:0x500000:0:0:$@ \
+ -o $@.new
+
+ mv $@.new $@
+endef
+
+# Create the default image format used by the StorLink reference design
+# SL93512r, Raidsonic NAS4220B and Itian Square One SQ201
+# with the squashfs and overlay inside the "rd.gz" file.
+# We pad it out to 6144K which is the size of the initramfs partition.
+#
+# The "application" partition is just blank. You can put anything
+# there when using OpenWRT. We just use that to create the
+# "sysupgrade" firmware image.
+define Build/storlink-default-images
+ mkdir -p $@.tmp
+
+ mv $@ $@.tmp/rd.gz
+ dd if=/dev/zero of=$@.tmp/hddapp.tgz bs=6144k count=1
+ cp $(IMAGE_KERNEL) $@.tmp/zImage
+ cp ./ImageInfo-$(1) $@.tmp/ImageInfo
+
+ sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
+
+ (cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
+
+ rm -rf $@.tmp
endef
# WBD-111 and WBD-222:
# All DTB files are prefixed with "gemini-"
define Device/Default
- DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+ PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb
- FILESYSTEMS := squashfs
- IMAGE_NAME := $$(IMAGE_PREFIX)-$$(1).$$(2)
BLOCKSIZE := 128k
- PAGESIZE := 2048
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
endef
# A reasonable set of default packages handling the NAS type
kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
kmod-nls-utf8 kmod-usb-storage-extras \
- samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
+ samba36-server mdadm cfdisk fdisk e2fsprogs badblocks \
+ partx-utils
-define Device/dlink-dir-685
+# The DIR-685 flash layout is kernel in WRGG format, padded and followed
+# by the appended rootfs followed by some reasonable JFFS padding, the
+# remainder will be used by JFFS2 through overlayfs.
+#
+# - For the factory image, the WRGG image includes the rootfs so that the
+# default firmware will flash it properly as all it knows is WRGG format.
+# - For the sysupgrade, we do not include the rootfs in the kernel image
+# so it is not needelessly tossed into the RAM by the boot loader.
+# This will be flashed from OpenWrt userland anyways so we only need
+# the minimum to make the boot loader happy.
+define Device/dlink_dir-685
DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
+ DEVICE_DTS := gemini-dlink-dir-685
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
- kmod-switch-rtl8366rb swconfig \
- rt2800-pci
- IMAGES += dir685-image
- IMAGE/dir685-image := dir685-images
+ kmod-rt2800-pci
+ IMAGES := factory.bin sysupgrade.bin
+ # Pad to 128k erase blocks with 160 bytes WRGG header
+ IMAGE/factory.bin := append-kernel | pad-offset 128k 160 | append-rootfs | dir685-pad-rootfs | dir685-image
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset 128k 160 | dir685-image | append-rootfs | dir685-pad-rootfs | append-metadata
endef
-TARGET_DEVICES += dlink-dir-685
+TARGET_DEVICES += dlink_dir-685
-define Device/dlink-dns-313
+define Device/dlink_dns-313
DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
+ DEVICE_DTS := gemini-dlink-dns-313
+ DEVICE_TYPE := nas
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
- IMAGES += dns313-image
- IMAGE/dns313-image := dns313-images
+ BLOCKSIZE := 1k
+ FILESYSTEMS := ext4
+ IMAGES := factory.bin.gz
+ IMAGE/factory.bin.gz := dns313-images | gzip
endef
-TARGET_DEVICES += dlink-dns-313
+TARGET_DEVICES += dlink_dns-313
-define Device/nas4220b
- DEVICE_TITLE := Raidsonic NAS IB-4220-B
- IMAGES += nas4220b-image
- IMAGE/nas4220b-image := nas4220b-images
+# Default images setup used by the StorLink reference designs
+define Device/storlink-reference
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
+ storlink-default-images $(1)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
endef
-TARGET_DEVICES += nas4220b
-define Device/rut1xx
- DEVICE_TITLE := Teltonika RUT1xx
- DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
+define Device/itian_sq201
+ $(Device/storlink-reference)
+ DEVICE_TITLE := ITian Square One SQ201
+ DEVICE_DTS := gemini-sq201
+ DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
endef
-TARGET_DEVICES += rut1xx
+TARGET_DEVICES += itian_sq201
-define Device/sq201
- DEVICE_TITLE := ITian Square One SQ201
- DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) rt61-pci
+define Device/raidsonic_ib-4220-b
+ $(Device/storlink-reference)
+ DEVICE_TITLE := Raidsonic NAS IB-4220-B
+ DEVICE_DTS := gemini-nas4220b
+ DEVICE_TYPE := nas
+endef
+TARGET_DEVICES += raidsonic_ib-4220-b
+
+define Device/storlink_sl93512r
+ $(Device/storlink-reference)
+ DEVICE_TITLE := StorLink SL93512r
+ DEVICE_DTS := gemini-sl93512r
endef
-TARGET_DEVICES += sq201
+TARGET_DEVICES += storlink_sl93512r
-define Device/wbd111
+
+# The wiliboard images need some changes to be functional and buildable.
+#
+# The dts would need to use the ecoscentric,redboot-fis-partitions partition
+# parser to get the correct partition offsets and size.
+#
+# The mkfwimage2 call need to be adjusted to reflect the real size of kernel
+# and rootfs. It is expected that the OEM firmware adjusts the on flash
+# partition table with the values defined in the image header.
+define Device/wiliboard_wbd111
DEVICE_TITLE := Wiliboard WBD-111
+ DEVICE_DTS := gemini-wbd111
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
endef
-TARGET_DEVICES += wbd111
-define Device/wbd222
+define Device/wiliboard_wbd222
DEVICE_TITLE := Wiliboard WBD-222
+ DEVICE_DTS := gemini-wbd222
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
endef
-TARGET_DEVICES += wbd222
$(eval $(call BuildImage))