-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
+
+# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
+# VERSION_DIST being on the place of major(?) version number, so we need to
+# use some number.
+UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
-o $@
endef
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
+# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@; \
rm $@.old1 $@.old2 )
endef
-define Build/mkubntimage2
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
define Device/ubnt
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
UBNT_BOARD := XM
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+ UBNT_VERSION := 6.0.0
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
endef
define Device/ubnt-xm
$(Device/ubnt)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci
+ DEVICE_PACKAGES += kmod-usb-ohci rssileds
UBNT_TYPE := XM
UBNT_CHIP := ar7240
ATH_SOC := ar7241
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
-define Device/ubnt-xw
- $(Device/ubnt)
- UBNT_TYPE := XW
- UBNT_CHIP := ar934x
-endef
-
define Device/ubnt-bz
$(Device/ubnt)
UBNT_TYPE := BZ
UBNT_CHIP := ar7240
+ ATH_SOC := ar7241
endef
-define Device/rw2458n
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti RW2458N
- BOARDNAME := RW2458N
+define Device/ubnt-wa
+ $(Device/ubnt)
+ UBNT_TYPE := WA
+ UBNT_CHIP := ar934x
+ UBNT_BOARD := WA
+ UBNT_VERSION := 8.5.0
+ ATH_SOC := ar9342
+endef
+
+define Device/ubnt-xw
+ $(Device/ubnt)
+ UBNT_TYPE := XW
+ UBNT_CHIP := ar934x
+ UBNT_BOARD := XM
+ UBNT_VERSION := 6.0.4
+ UBNT_REVISION := 42.$(UBNT_REVISION)
+ ATH_SOC := ar9342
endef
-#TARGET_DEVICES += rw2458n
-define Device/ubnt-airrouter
+define Device/ubnt_airrouter
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti AirRouter
- BOARDNAME := UBNT-AR
+ SUPPORTED_DEVICES += airrouter
endef
-#TARGET_DEVICES += ubnt-airrouter
+TARGET_DEVICES += ubnt_airrouter
-define Device/ubnt-bullet-m
+define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
- BOARDNAME := UBNT-BM
+ SUPPORTED_DEVICES += bullet-m
endef
-TARGET_DEVICES += ubnt-bullet-m
+TARGET_DEVICES += ubnt_bullet-m
-define Device/ubnt-rocket-m
+define Device/ubnt_bullet-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_TITLE := Ubiquiti Bullet-M (XW)
+ SUPPORTED_DEVICES += bullet-m-xw
+endef
+TARGET_DEVICES += ubnt_bullet-m-xw
+
+define Device/ubnt_rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
- BOARDNAME := UBNT-RM
+ SUPPORTED_DEVICES += rocket-m
endef
-TARGET_DEVICES += ubnt-rocket-m
+TARGET_DEVICES += ubnt_rocket-m
-define Device/ubnt-nano-m
+define Device/ubnt_nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
- BOARDNAME := UBNT-NM
-endef
-TARGET_DEVICES += ubnt-nano-m
-
-define Device/ubnt-unifi
- $(Device/ubnt-bz)
- ATH_SOC := ar7241
- DEVICE_TITLE := Ubiquiti UniFi
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE += UBNTUNIFI
+ SUPPORTED_DEVICES += nano-m
endef
-TARGET_DEVICES += ubnt-unifi
+TARGET_DEVICES += ubnt_nano-m
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
+define Device/ubnt_lap-120
+ $(Device/ubnt-wa)
+ DEVICE_TITLE := Ubiquiti LiteAP ac (LAP-120)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15744k
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
endef
-#TARGET_DEVICES += ubnt-unifiac-lite
+TARGET_DEVICES += ubnt_lap-120
-define Device/ubnt-unifiac-mesh
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+define Device/ubnt_nanostation-ac
+ $(Device/ubnt-wa)
+ DEVICE_TITLE := Ubiquiti Nanostation AC
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15744k
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
endef
-#TARGET_DEVICES += ubnt-unifiac-mesh
+TARGET_DEVICES += ubnt_nanostation-ac
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
+define Device/ubnt_nanostation-ac-loco
+ $(Device/ubnt-wa)
+ DEVICE_TITLE := Ubiquiti Nanostation AC loco
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15744k
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
endef
-#TARGET_DEVICES += ubnt-unifiac-pro
+TARGET_DEVICES += ubnt_nanostation-ac-loco
-define Device/ubnt-unifi-outdoor
+define Device/ubnt_unifi
$(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE += UBNTUNIFIOUTDOOR
-endef
-#TARGET_DEVICES += ubnt-unifi-outdoor
-
-define Device/ubnt-nano-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Nano M XW
- BOARDNAME := UBNT-NM-XW
+ DEVICE_TITLE := Ubiquiti UniFi
+ SUPPORTED_DEVICES += unifi
endef
-#TARGET_DEVICES += ubnt-nano-m-xw
+TARGET_DEVICES += ubnt_unifi
-define Device/ubnt-loco-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Loco XW
- BOARDNAME := UBNT-LOCO-XW
+define Device/ubnt_unifiac
+ ATH_SOC := qca9563
+ IMAGE_SIZE := 7744k
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
-#TARGET_DEVICES += ubnt-loco-m-xw
-define Device/ubnt-rocket-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M XW
- BOARDNAME := UBNT-RM-XW
-endef
-#TARGET_DEVICES += ubnt-rocket-m-xw
-define Device/ubnt-rocket-m-ti
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M TI
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
+define Device/ubnt_unifiac-lite
+ $(Device/ubnt_unifiac)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Lite
+ SUPPORTED_DEVICES += ubnt-unifiac-lite
endef
-#TARGET_DEVICES += ubnt-rocket-m-ti
+TARGET_DEVICES += ubnt_unifiac-lite
-define Device/ubnt-air-gateway
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway
- BOARDNAME := UBNT-AGW
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE := ttyATH0,115200
+define Device/ubnt_unifiac-mesh
+ $(Device/ubnt_unifiac)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+ SUPPORTED_DEVICES += ubnt-unifiac-mesh
endef
-#TARGET_DEVICES += ubnt-air-gateway
+TARGET_DEVICES += ubnt_unifiac-mesh
-define Device/ubnt-air-gateway-pro
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway Pro
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
+define Device/ubnt_unifiac-mesh-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Mesh Pro
+ SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
endef
-#TARGET_DEVICES += ubnt-air-gateway-pro
+TARGET_DEVICES += ubnt_unifiac-mesh-pro
-define Device/ubdev01
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti ubDEV01
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
+define Device/ubnt_unifiac-pro
+ $(Device/ubnt_unifiac)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Pro
+ DEVICE_PACKAGES += kmod-usb-core kmod-usb2
+ SUPPORTED_DEVICES += ubnt-unifiac-pro
endef
-#TARGET_DEVICES += ubdev01
+TARGET_DEVICES += ubnt_unifiac-pro
-define Device/ubnt-routerstation
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
+define Device/ubnt_routerstation_common
+ DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci kmod-usb2 fconfig
+ ATH_SOC := ar7161
IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) | append-metadata
+ KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb
endef
-define Device/ubnt-rs
- $(Device/ubnt-routerstation)
+define Device/ubnt_routerstation
+ $(Device/ubnt_routerstation_common)
DEVICE_TITLE := Ubiquiti RouterStation
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE += UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
+ DEVICE_PACKAGES += -swconfig
endef
-#TARGET_DEVICES += ubnt-rs
+TARGET_DEVICES += ubnt_routerstation
-define Device/ubnt-rspro
- $(Device/ubnt-routerstation)
+define Device/ubnt_routerstation-pro
+ $(Device/ubnt_routerstation_common)
DEVICE_TITLE := Ubiquiti RouterStation Pro
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE += UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
-#TARGET_DEVICES += ubnt-rspro
-
-define Device/ubnt-ls-sr71
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti LS-SR71
- BOARDNAME := UBNT-LS-SR71
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
-endef
-#TARGET_DEVICES += ubnt-ls-sr71
-
-define Device/ubnt-uap-pro
- DEVICE_TITLE := Ubiquiti UAP Pro
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-
-define Device/ubnt-unifi-outdoor-plus
- $(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
-endef
+TARGET_DEVICES += ubnt_routerstation-pro