generic: ar8216: fix unknown packet flooding for ar8229/ar8236

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9561_avm_fritz4020.dts

diff --git a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
index 6b2a35c35a63669bf1d4a5d95c972535e08d86a7..75cc5761ba7b1cfa0944f11b8fb9e7177dc41a88 100644 (file)
--- a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
+++ b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
@@ -11,10 +11,10 @@
        model = "AVM FRITZ!Box 4020";
 
        aliases {
-               led-boot = &power;
-               led-failsafe = &info_red;
-               led-running = &power;
-               led-upgrade = &info_red;
+               led-boot = &led_power;
+               led-failsafe = &led_info_red;
+               led-running = &led_power;
+               led-upgrade = &led_info_red;
        };
 
        chosen {
@@ -26,8 +26,8 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               gpio-sck = <&gpio 20 GPIO_ACTIVE_HIGH>;
-               gpio-mosi = <&gpio 19 GPIO_ACTIVE_HIGH>;
+               sck-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+               mosi-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
                num-chipselects = <0>;
 
                led_gpio: led_gpio@0 {
@@ -36,7 +36,6 @@
                        gpio-controller;
                        #gpio-cells = <2>;
                        registers-number = <1>;
-                       lines-initial-states = /bits/ 8 <0xff>;
                        spi-max-frequency = <10000000>;
 
                        gpio_latch_bit {
@@ -45,14 +44,13 @@
                                output-high;
                                line-name = "gpio-latch-bit";
                        };
-
                };
        };
 
        leds {
                compatible = "gpio-leds";
 
-               power: power {
+               led_power: power {
                        label = "fritz4020:green:power";
                        gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
                        default-state = "on";
@@ -62,48 +60,42 @@
                        label = "fritz4020:green:wlan";
                        gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
-                       default-state = "off";
                };
 
                lan {
                        label = "fritz4020:green:lan";
                        gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                wan {
                        label = "fritz4020:green:wan";
                        gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                info {
                        label = "fritz4020:green:info";
                        gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
-               info_red: info_red {
+               led_info_red: info_red {
                        label = "fritz4020:red:info";
                        gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
+               compatible = "gpio-keys";
 
-               wps_button {
+               wps {
                        label = "WPS button";
                        linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
 
-               wlan_button {
+               wlan {
                        label = "WLAN button";
                        linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };
        };
 };
@@ -118,6 +110,7 @@
 
 &spi {
        status = "okay";
+
        num-cs = <1>;
 
        flash@0 {
@@ -137,6 +130,7 @@
                        };
 
                        partition@1 {
+                               compatible = "avm,eva-firmware";
                                label = "firmware";
                                reg = <0x020000 0xee0000>;
                        };
@@ -159,7 +153,6 @@
 &eth0 {
        status = "okay";
 
-       phy-mode = "mii";
        phy-handle = <&swphy0>;
 
        gmac-config {
@@ -176,5 +169,6 @@
 
 &wmac {
        status = "okay";
+
        qca,no-eeprom;
 };