generic: ar8216: fix unknown packet flooding for ar8229/ar8236

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9561_avm_fritz4020.dts

diff --git a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
index 1e4e088b5d1ab37a831b839ba370a6b15c06fa13..75cc5761ba7b1cfa0944f11b8fb9e7177dc41a88 100644 (file)
--- a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
+++ b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
@@ -11,10 +11,10 @@
        model = "AVM FRITZ!Box 4020";
 
        aliases {
-               led-boot = &power;
-               led-failsafe = &info_red;
-               led-running = &power;
-               led-upgrade = &info_red;
+               led-boot = &led_power;
+               led-failsafe = &led_info_red;
+               led-running = &led_power;
+               led-upgrade = &led_info_red;
        };
 
        chosen {
@@ -36,7 +36,6 @@
                        gpio-controller;
                        #gpio-cells = <2>;
                        registers-number = <1>;
-                       lines-initial-states = /bits/ 8 <0xff>;
                        spi-max-frequency = <10000000>;
 
                        gpio_latch_bit {
@@ -51,7 +50,7 @@
        leds {
                compatible = "gpio-leds";
 
-               power: power {
+               led_power: power {
                        label = "fritz4020:green:power";
                        gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
                        default-state = "on";
@@ -78,23 +77,22 @@
                        gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
                };
 
-               info_red: info_red {
+               led_info_red: info_red {
                        label = "fritz4020:red:info";
                        gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
+               compatible = "gpio-keys";
 
-               wps_button {
+               wps {
                        label = "WPS button";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
 
-               wlan_button {
+               wlan {
                        label = "WLAN button";
                        linux,code = <KEY_RFKILL>;
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
@@ -112,6 +110,7 @@
 
 &spi {
        status = "okay";
+
        num-cs = <1>;
 
        flash@0 {
@@ -154,7 +153,6 @@
 &eth0 {
        status = "okay";
 
-       phy-mode = "mii";
        phy-handle = <&swphy0>;
 
        gmac-config {
@@ -171,5 +169,6 @@
 
 &wmac {
        status = "okay";
+
        qca,no-eeprom;
 };