treewide: dts: Remove default-state=off property from all gpio LED nodes

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9558_tplink_tl-wr1043nd.dtsi

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
index 52041b8d01c878c0e85161a026e3b06d4556b9a7..61d4aec6243a15ff3cad94cdb8d7da15fd07f91b 100644 (file)
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -12,7 +12,10 @@
        };
 
        aliases {
-               led-status = &system;
+               led-boot = &system;
+               led-failsafe = &system;
+               led-running = &system;
+               led-upgrade = &system;
        };
 
        leds {
@@ -27,7 +30,6 @@
                usb {
                        label = "tp-link:green:usb";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        trigger-sources = <&hub_port0>;
                        linux,default-trigger = "usbport";
                };
@@ -35,14 +37,12 @@
                wifi_green {
                        label = "tp-link:green:wlan";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
 
                wifi_wps {
                        label = "tp-link:green:wps";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
        };
 
@@ -120,6 +120,7 @@
                        };
 
                        partition@20000 {
+                               compatible = "tplink,firmware";
                                label = "firmware";
                                reg = <0x020000 0x7d0000>;
                        };
@@ -155,6 +156,8 @@
 &eth0 {
        status = "okay";
 
+       pll-data = <0x56000000 0x00000101 0x00001616>;
+
        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <1>;
        phy-handle = <&phy0>;
@@ -163,6 +166,8 @@
 &eth1 {
        status = "okay";
 
+       pll-data = <0x03000101 0x00000101 0x00001616>;
+
        mtd-mac-address = <&uboot 0x1fc00>;
 
        fixed-link {