treewide: dts: Remove default-state=off property from all gpio LED nodes

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9558_tplink_tl-wr1043nd.dtsi

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
index 4438f911fcf4116c0b6da5dc292ec87ed9560deb..61d4aec6243a15ff3cad94cdb8d7da15fd07f91b 100644 (file)
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -12,7 +12,10 @@
        };
 
        aliases {
-               led-status = &system;
+               led-boot = &system;
+               led-failsafe = &system;
+               led-running = &system;
+               led-upgrade = &system;
        };
 
        leds {
@@ -27,7 +30,6 @@
                usb {
                        label = "tp-link:green:usb";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        trigger-sources = <&hub_port0>;
                        linux,default-trigger = "usbport";
                };
@@ -35,21 +37,17 @@
                wifi_green {
                        label = "tp-link:green:wlan";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
 
                wifi_wps {
                        label = "tp-link:green:wps";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
        };
 
        keys {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
 
                reset {
                        label = "Reset button";
@@ -91,6 +89,8 @@
 };
 
 &usb0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
 
        hub_port0: port@1 {
@@ -104,8 +104,6 @@
        num-cs = <1>;
 
        flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;
@@ -122,6 +120,7 @@
                        };
 
                        partition@20000 {
+                               compatible = "tplink,firmware";
                                label = "firmware";
                                reg = <0x020000 0x7d0000>;
                        };
@@ -141,15 +140,15 @@
        phy0: ethernet-phy@0 {
                reg = <0>;
                qca,ar8327-initvals = <
-                   0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-                   0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-                   0x10 0x81000080 /* POWER_ON_STRIP */
-                   0x50 0xcc35cc35 /* LED_CTRL0 */
-                   0x54 0xca35ca35 /* LED_CTRL1 */
-                   0x58 0xc935c935 /* LED_CTRL2 */
-                   0x5c 0x03ffff00 /* LED_CTRL3 */
-                   0x7c 0x0000007e /* PORT0_STATUS */
-                   0x94 0x0000007e /* PORT6 STATUS */
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+                       0x10 0x81000080 /* POWER_ON_STRIP */
+                       0x50 0xcc35cc35 /* LED_CTRL0 */
+                       0x54 0xca35ca35 /* LED_CTRL1 */
+                       0x58 0xc935c935 /* LED_CTRL2 */
+                       0x5c 0x03ffff00 /* LED_CTRL3 */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+                       0x94 0x0000007e /* PORT6 STATUS */
                >;
        };
 };
@@ -157,6 +156,8 @@
 &eth0 {
        status = "okay";
 
+       pll-data = <0x56000000 0x00000101 0x00001616>;
+
        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <1>;
        phy-handle = <&phy0>;
@@ -165,6 +166,8 @@
 &eth1 {
        status = "okay";
 
+       pll-data = <0x03000101 0x00000101 0x00001616>;
+
        mtd-mac-address = <&uboot 0x1fc00>;
 
        fixed-link {