generic: ar8216: fix unknown packet flooding for ar8229/ar8236

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9558_netgear_ex7300.dtsi

diff --git a/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi b/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi
index 21c25a571788fd3f8ff21c1f95e1effa674e3df5..19b6d5c8cbcc993e9d44e9f5c5b29dfa54cf11a7 100644 (file)
--- a/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi
+++ b/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi
@@ -1,10 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca9557.dtsi"
+#include "qca955x.dtsi"
 
 / {
        chosen {
@@ -12,10 +11,11 @@
        };
 
        aliases {
-               led-boot = &power_green;
-               led-failsafe = &power_amber;
-               led-running = &power_green;
-               led-upgrade = &power_amber;
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_amber;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_amber;
+               label-mac-device = &eth0;
        };
 
        led_spi {
@@ -23,8 +23,8 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>;
-               gpio-mosi = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+               mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
                num-chipselects = <0>;
 
                led_gpio: led_gpio@0 {
@@ -33,7 +33,6 @@
                        gpio-controller;
                        #gpio-cells = <2>;
                        registers-number = <1>;
-                       lines-initial-states = /bits/ 8 <0xff>;
                        spi-max-frequency = <500000>;
 
                        gpio_latch_bit {
@@ -48,12 +47,12 @@
        leds {
                compatible = "gpio-leds";
 
-               power_green: power_green {
+               led_power_green: power_green {
                        label = "netgear:green:power";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
 
-               power_amber: power_amber {
+               led_power_amber: power_amber {
                        label = "netgear:amber:power";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
@@ -135,6 +134,7 @@
 
 &spi {
        status = "okay";
+
        num-cs = <1>;
 
        flash@0 {
@@ -216,7 +216,7 @@
        mtd-mac-address = <&caldata 0x00>;
 
        phy-handle = <&phy4>;
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-rxid";
 
-       pll-data = <0x83000000 0x80000101 0x80001313>;
+       pll-data = <0x86000000 0x80000101 0x80001313>;
 };