cpu@0 {
device_type = "cpu";
- compatible = "mips,mips24Kc";
+ compatible = "mips,mips74Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
status = "disabled";
};
+ usb_phy0: usb-phy@18030000 {
+ compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_phy1: usb-phy {
+ compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst2 4>, <&rst2 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
gpio: gpio@18040000 {
compatible = "qca,ar9557-gpio",
"qca,ar9340-gpio";
pll: pll-controller@18050000 {
compatible = "qca,ar9557-pll",
"qca,qca9550-pll";
- reg = <0x18050000 0x20>;
+ reg = <0x18050000 0x50>;
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
+
+ clocks = <&extosc>;
};
wdt: wdt@18060008 {
};
rst: reset-controller@1806001c {
- compatible = "qca,ar9557-reset",
+ compatible = "qca,qca9550-reset",
"qca,ar7100-reset",
"simple-bus";
reg = <0x1806001c 0x4>;
interrupt-parent = <&cpuintc>;
intc2: interrupt-controller@2 {
- compatible = "qcom,qca9556-intc";
+ compatible = "qca,ar9340-intc";
+ interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
- qcom,pending-bits = <0x1f0>, /* pcie rc1 */
- <0xf>; /* wmac */
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0xf>, /* wmac */
+ <0x1f0>; /* pcie rc 0 */
};
intc3: interrupt-controller@3 {
- compatible = "qcom,qca9556-intc";
+ compatible = "qca,ar9340-intc";
+ interrupt-parent = <&cpuintc>;
interrupts = <3>;
interrupt-controller;
#interrupt-cells = <1>;
- qcom,pending-bits = <0x1f000>, /* pcie rc2 */
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0x1f000>, /* pcie rc 1 */
<0x1000000>, /* usb1 */
<0x10000000>; /* usb2 */
};
};
+ rst2: reset-controller@180600c0 {
+ compatible = "qca,qca9550-reset",
+ "qca,ar7100-reset",
+ "simple-bus";
+ reg = <0x180600c0 0x4>;
+
+ #reset-cells = <1>;
+ };
+
pcie0: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
- interrupts = <0>;
+ interrupts = <1>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
+
+ pcie1: pcie-controller@18250000 {
+ compatible = "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x18250000 0x1000>, /* CRP */
+ <0x18280000 0x100>, /* CTRL */
+ <0x16000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc3>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie1 0>;
+ status = "disabled";
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,qca9550-wmac";
+ reg = <0x18100000 0x10000>;
+
+ interrupt-parent = <&intc2>;
+ interrupts = <0>;
+
+ status = "disabled";
+ };
};
+ usb0: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1fc>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <1>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy0";
+ phys = <&usb_phy0>;
+
+ status = "disabled";
+ };
+
+ usb1: usb@1b400000 {
+ compatible = "generic-ehci";
+ reg = <0x1b400000 0x1fc>;
+
+ interrupt-parent = <&intc3>;
+ interrupts = <2>;
+ resets = <&rst2 5>;
+ reset-names = "usb-host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy1";
+ phys = <&usb_phy1>;
+
+ status = "disabled";
+ };
+
spi: spi@1f000000 {
compatible = "qca,ar9557-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;