// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_tplink_cpe.dtsi"
/ {
model = "TP-Link CPE610 v1";
compatible = "tplink,cpe610-v1", "qca,ar9344";
aliases {
- led-boot = &system;
- led-failsafe = &system;
- led-upgrade = &system;
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
};
leds {
compatible = "gpio-leds";
- system: lan {
+ led_lan: lan {
label = "tp-link:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
linux,default-trigger = "phy0tpt";
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
-};
-
-&ref {
- clock-frequency = <40000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- num-cs = <1>;
-
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "partition-table";
- reg = <0x020000 0x010000>;
- read-only;
- };
-
- info: partition@30000 {
- label = "info";
- reg = <0x030000 0x010000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x040000 0x780000>;
-
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x000000 0x1c0000>;
- };
-
- partition@1c0000 {
- label = "rootfs";
- reg = <0x1c0000 0x5c0000>;
- };
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x030000>;
- read-only;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x08>;
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&info 0x08>;
-
- phy-mode = "mii";
- phy-handle = <&swphy4>;
};
ð1 {
status = "okay";
+
compatible = "syscon", "simple-mfd";
};