ath79: define CONFIG_MFD_RB4XX_CPLD to fix build breakage

[oweals/openwrt.git] / target / linux / ath79 / dts / ar9342_iodata_etg3-r.dts

diff --git a/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts b/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts
index f674cf46d177416301f4196b40921cd19eb6252b..1ced60d5fd19981be484742e42c6f22460bac716 100644 (file)
--- a/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts
+++ b/target/linux/ath79/dts/ar9342_iodata_etg3-r.dts
@@ -11,16 +11,16 @@
        model = "I-O DATA ETG3-R";
 
        aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        leds {
                compatible = "gpio-leds";
 
-               power: power {
+               led_power: power {
                        label = "etg3-r:green:power";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                        default-state = "on";
@@ -29,13 +29,11 @@
                notification {
                        label = "etg3-r:green:notification";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
@@ -46,10 +44,15 @@
        };
 };
 
+&ref {
+       clock-frequency = <40000000>;
+};
+
 &spi {
-       num-cs = <1>;
        status = "okay";
 
+       num-cs = <1>;
+
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
@@ -72,6 +75,7 @@
                        };
 
                        partition@50000 {
+                               compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0x780000>;
                        };
@@ -89,7 +93,7 @@
                        };
 
                        partition@7f0000 {
-                               label = "ART";
+                               label = "art";
                                reg = <0x7f0000 0x010000>;
                                read-only;
                        };
@@ -118,10 +122,18 @@
 &eth0 {
        status = "okay";
 
-       pll-data = <0x06000000 0x00000101 0x00001616>;
+       pll-data = <0x0e000000 0x00000101 0x00001616>;
 
        phy-mode = "rgmii";
        phy-handle = <&phy0>;
+
+       gmac-config {
+               device = <&gmac>;
+
+               rgmii-gmac0 = <1>;
+               rxd-delay = <3>;
+               rxdv-delay = <3>;
+       };
 };
 
 &uart {