model = "Ubiquiti UniFi AP";
aliases {
- led-status = &dome_green;
+ led-boot = &led_dome_green;
+ led-failsafe = &led_dome_green;
+ led-running = &led_dome_green;
+ led-upgrade = &led_dome_green;
+ label-mac-device = &wifi;
};
extosc: ref {
};
keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "gpio-keys";
- poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
leds {
compatible = "gpio-leds";
- dome_green: dome-green {
+
+ led_dome_green: dome_green {
label = "ubnt:green:dome";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
- dome-orange {
+ dome_orange {
label = "ubnt:orange:dome";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
&spi {
status = "okay";
+
num-cs = <1>;
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
read-only;
};
- partition@1 {
+ partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
- partition@2 {
+ partition@50000 {
+ compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
- partition@3 {
+ partition@7a0000 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
- partition@4 {
+ partition@7b0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
- art: partition@5 {
+ art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
&pcie {
status = "okay";
- ath9k@0 {
+ wifi: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
ð0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
- phy-handle = <&phy4>;
};
ð1 {
status = "okay";
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
};