ath79: add support for TP-Link TL-WR941N v7 (CN)

[oweals/openwrt.git] / target / linux / ath79 / dts / ar7161_netgear_wndr3800.dts

diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
index 8e28c4d90f93ca4456dfe9a7af30f9ef89e41afa..589d0ec8401e4977a56381778fc200bd6b6c5700 100644 (file)
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
@@ -1,214 +1,36 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_netgear_wndr3700.dtsi"
 
 / {
        compatible = "netgear,wndr3800", "qca,ar7161";
        model = "Netgear WNDR3800";
-
-       aliases {
-               led-status = &power_green;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       extosc: ref {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-output-names = "ref";
-               clock-frequency = <40000000>;
-       };
-
-       reset-leds {
-               compatible = "reset-leds";
-
-               usb_led {
-                       label = "netgear:green:usb";
-                       resets = <&rst 12>;
-                       trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
-                       linux,default-trigger = "usbport";
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               wps {
-                       label = "netgear:orange:wps";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               power_green: power_green {
-                       label = "netgear:green:power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               power_orange {
-                       label = "netgear:orange:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wps_green {
-                       label = "netgear:green:wps";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wan_green {
-                       label = "netgear:green:wan";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               poll-interval = <100>;
-
-               wps {
-                       label = "wps";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-
-               rfkill {
-                       label = "rfkill";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       rtl8366s {
-               compatible = "realtek,rtl8366s";
-               gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
-               gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
-               mdio-bus {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       status = "okay";
-
-                       phy-mask = <0x10>;
-
-                       phy4: ethernet-phy@4 {
-                               reg = <4>;
-                               phy-mode = "rgmii";
-                       };
-               };
-       };
-};
-
-&usb_phy {
-       status = "okay";
 };
 
-&usb1 {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
-
-       usb_ochi_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
+&partitions {
+       partition@0 {
+               label = "u-boot";
+               reg = <0x000000 0x050000>;
+               read-only;
        };
-};
-
-&usb2 {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
 
-       usb_echi_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
+       partition@50000 {
+               label = "u-boot-env";
+               reg = <0x050000 0x020000>;
+               read-only;
        };
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
 
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x050000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@2 {
-                               label = "firmware";
-                               reg = <0x070000 0xf80000>;
-                       };
-
-                       art: partition@3 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
+       partition@70000 {
+               label = "firmware";
+               reg = <0x070000 0xf80000>;
+               compatible = "netgear,uimage";
        };
-};
-
-&eth0 {
-       status = "okay";
-
-       pll-data = <0x11110000 0x00001099 0x00991099>;
 
-       mtd-mac-address = <&art 0x00>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
        };
 };
 
-&eth1 {
-       status = "okay";
-
-       pll-data = <0x11110000 0x00001099 0x00991099>;
-
-       mtd-mac-address = <&art 0x06>;
-
-       resets = <&rst 13>;
-       reset-names = "mac";
-
-       phy-handle = <&phy4>;
-};