ath79: rename DTSI for Netgear WNDR devices based on ar7161
[oweals/openwrt.git] / target / linux / ath79 / dts / ar7161_netgear_wndr.dtsi
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr.dtsi b/target/linux/ath79/dts/ar7161_netgear_wndr.dtsi
new file mode 100644 (file)
index 0000000..f1db1ff
--- /dev/null
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7100.dtsi"
+
+/ {
+       aliases {
+               led-boot = &led_power_orange;
+               led-failsafe = &led_power_orange;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_orange;
+               label-mac-device = &eth0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       extosc: ref {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-output-names = "ref";
+               clock-frequency = <40000000>;
+       };
+
+       reset-leds {
+               compatible = "reset-leds";
+
+               usb_led {
+                       label = "netgear:green:usb";
+                       resets = <&rst 12>;
+                       trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wps {
+                       label = "netgear:orange:wps";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_green: power_green {
+                       label = "netgear:green:power";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_orange: power_orange {
+                       label = "netgear:orange:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wps_green {
+                       label = "netgear:green:wps";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               wan_green {
+                       label = "netgear:green:wan";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       ath9k-leds {
+               compatible = "gpio-leds";
+
+               wlan2g {
+                       label = "netgear:green:wlan2g";
+                       gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+               wlan5g {
+                       label = "netgear:blue:wlan5g";
+                       gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       linux,code = <KEY_RFKILL>;
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       rtl8366s {
+               compatible = "realtek,rtl8366s";
+
+               gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+               mdio-bus {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "okay";
+
+                       phy-mask = <0x10>;
+
+                       phy4: ethernet-phy@4 {
+                               reg = <4>;
+                               phy-mode = "rgmii";
+                       };
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb1 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       usb_ohci_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb2 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       usb_ehci_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&pcie0 {
+       status = "okay";
+
+       ath9k0: wifi@0,11 {
+               compatible = "pci168c,0029";
+               reg = <0x8800 0 0 0 0>;
+               mtd-mac-address = <&art 0x0>;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+
+               /* all WNDR3700 variants have four antennae dedicated
+                * to the 2.4GHz radio. Two antennae are available for
+                * each chain. The following configuration is the
+                * default setting which taken from the vendor's wifi
+                * code for that radio.
+                *
+                * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
+                *      [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
+                */
+               antenna-demux {
+                       gpio-hog;
+                       line-name = "fixed antenna group 1";
+                       gpios = <6 GPIO_ACTIVE_LOW>,
+                               <7 GPIO_ACTIVE_HIGH>,
+                               <8 GPIO_ACTIVE_LOW>,
+                               <9 GPIO_ACTIVE_HIGH>;
+                       output-high;
+               };
+       };
+
+       ath9k1: wifi@0,12 {
+               compatible = "pci168c,0029";
+               reg = <0x9000 0 0 0 0>;
+               mtd-mac-address = <&art 0xc>;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions: partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x11110000 0x00001099 0x00991099>;
+
+       mtd-mac-address = <&art 0x00>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&eth1 {
+       status = "okay";
+
+       pll-data = <0x11110000 0x00001099 0x00991099>;
+
+       mtd-mac-address = <&art 0x06>;
+
+       phy-handle = <&phy4>;
+};