ar71xx: move gpio-buttons support into a spearate file

[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wrt160nl.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
index 8ee46c60bf1853713c6dafdc30d330d9e296b9b5..1d4b25fe2d2f5120c18c512ccda8fb1b385bb5fa 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
@@ -11,13 +11,25 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define WRT160NL_GPIO_LED_POWER                14
+#define WRT160NL_GPIO_LED_WPS_AMBER    9
+#define WRT160NL_GPIO_LED_WPS_BLUE     8
+#define WRT160NL_GPIO_LED_WLAN         6
+
+#define WRT160NL_GPIO_BTN_WPS          7
+#define WRT160NL_GPIO_BTN_RESET                21
+
+#define WRT160NL_BUTTONS_POLL_INTERVAL 20
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition wrt160nl_partitions[] = {
@@ -59,13 +71,42 @@ static struct flash_platform_data wrt160nl_flash_data = {
 #endif
 };
 
-static struct spi_board_info wrt160nl_spi_info[] = {
+static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
+       {
+               .name           = "wrt160nl:blue:power",
+               .gpio           = WRT160NL_GPIO_LED_POWER,
+               .active_low     = 1,
+               .default_trigger = "default-on",
+       }, {
+               .name           = "wrt160nl:amber:wps",
+               .gpio           = WRT160NL_GPIO_LED_WPS_AMBER,
+               .active_low     = 1,
+       }, {
+               .name           = "wrt160nl:blue:wps",
+               .gpio           = WRT160NL_GPIO_LED_WPS_BLUE,
+               .active_low     = 1,
+       }, {
+               .name           = "wrt160nl:blue:wlan",
+               .gpio           = WRT160NL_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_button wrt160nl_gpio_buttons[] __initdata = {
        {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &wrt160nl_flash_data,
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 5,
+               .gpio           = WRT160NL_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 5,
+               .gpio           = WRT160NL_GPIO_BTN_WPS,
+               .active_low     = 1,
        }
 };
 
@@ -74,9 +115,7 @@ static void __init wrt160nl_setup(void)
        ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0xf;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.phy_mask = 0x01;
 
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = 0x10;
@@ -84,13 +123,17 @@ static void __init wrt160nl_setup(void)
        ar71xx_add_device_eth(0);
        ar71xx_add_device_eth(1);
 
-       ar71xx_add_device_spi(NULL, wrt160nl_spi_info,
-                             ARRAY_SIZE(wrt160nl_spi_info));
+       ar71xx_add_device_m25p80(&wrt160nl_flash_data);
 
        ar71xx_add_device_usb();
-       ar91xx_add_device_wmac();
+       ar913x_add_device_wmac();
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
+                                       wrt160nl_leds_gpio);
 
-       /* TODO: LEDs, buttons */
+       ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(wrt160nl_gpio_buttons),
+                                       wrt160nl_gpio_buttons);
 }
 
 MIPS_MACHINE(AR71XX_MACH_WRT160NL, "Linksys WRT160NL", wrt160nl_setup);