ar71xx: move gpio-buttons support into a spearate file

[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wndr3700.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
index 9c5dd41a4c2a5ceb25fabf3a38e4edfe87330486..befeeda0d6a5a2dea03ce65726cefb24189f4c6c 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
@@ -12,17 +12,17 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
 
 #define WNDR3700_GPIO_LED_WPS_ORANGE   0
 #define WNDR3700_GPIO_LED_POWER_ORANGE 1
@@ -33,8 +33,16 @@
 #define WNDR3700_GPIO_BTN_RESET                8
 #define WNDR3700_GPIO_BTN_WIFI         11
 
+#define WNDR3700_GPIO_RTL8366_SDA      5
+#define WNDR3700_GPIO_RTL8366_SCK      7
+
 #define WNDR3700_BUTTONS_POLL_INTERVAL    20
 
+#define WNDR3700_WMAC0_MAC_OFFSET      0
+#define WNDR3700_WMAC1_MAC_OFFSET      0xc
+#define WNDR3700_CALDATA0_OFFSET       0x1000
+#define WNDR3700_CALDATA1_OFFSET       0x5000
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition wndr3700_partitions[] = {
        {
@@ -92,65 +100,6 @@ static struct flash_platform_data wndr3700_flash_data = {
 #endif
 };
 
-#ifdef CONFIG_PCI
-static struct ar71xx_pci_irq wndr3700_pci_irqs[] __initdata = {
-       {
-               .slot   = 0,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }, {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }
-};
-
-static struct ath9k_platform_data wndr3700_wmac0_data;
-static struct ath9k_platform_data wndr3700_wmac1_data;
-
-static int wndr3700_pci_plat_dev_init(struct pci_dev *dev)
-{
-       switch (PCI_SLOT(dev->devfn)) {
-       case 17:
-               dev->dev.platform_data = &wndr3700_wmac0_data;
-               break;
-       case 18:
-               dev->dev.platform_data = &wndr3700_wmac1_data;
-               break;
-       }
-
-       return 0;
-}
-
-static void __init wndr3700_pci_init(void)
-{
-       u8 *ee;
-
-       ee = (u8 *) KSEG1ADDR(0x1fff1000);
-       memcpy(wndr3700_wmac0_data.eeprom_data, ee,
-              sizeof(wndr3700_wmac0_data.eeprom_data));
-
-       ee = (u8 *) KSEG1ADDR(0x1fff5000);
-       memcpy(wndr3700_wmac1_data.eeprom_data, ee,
-              sizeof(wndr3700_wmac1_data.eeprom_data));
-
-       ar71xx_pci_plat_dev_init = wndr3700_pci_plat_dev_init;
-       ar71xx_pci_init(ARRAY_SIZE(wndr3700_pci_irqs), wndr3700_pci_irqs);
-}
-#else
-static inline void wndr3700_pci_init(void) { };
-#endif /* CONFIG_PCI */
-
-static struct spi_board_info wndr3700_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &wndr3700_flash_data,
-       }
-};
-
 static struct gpio_led wndr3700_leds_gpio[] __initdata = {
        {
                .name           = "wndr3700:green:power",
@@ -193,20 +142,34 @@ static struct gpio_button wndr3700_gpio_buttons[] __initdata = {
        }
 };
 
+static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+       .gpio_sda        = WNDR3700_GPIO_RTL8366_SDA,
+       .gpio_sck        = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366_smi_device = {
+       .name           = "rtl8366-smi",
+       .id             = -1,
+       .dev = {
+               .platform_data  = &wndr3700_rtl8366_smi_data,
+       }
+};
+
 static void __init wndr3700_setup(void)
 {
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
-       ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_set_mac_base(art);
 
        ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_1000;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = 0x10;
 
@@ -215,8 +178,7 @@ static void __init wndr3700_setup(void)
 
        ar71xx_add_device_usb();
 
-       ar71xx_add_device_spi(NULL, wndr3700_spi_info,
-                             ARRAY_SIZE(wndr3700_spi_info));
+       ar71xx_add_device_m25p80(&wndr3700_flash_data);
 
         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
                                    wndr3700_leds_gpio);
@@ -225,7 +187,13 @@ static void __init wndr3700_setup(void)
                                      ARRAY_SIZE(wndr3700_gpio_buttons),
                                      wndr3700_gpio_buttons);
 
-       wndr3700_pci_init();
+       platform_device_register(&wndr3700_rtl8366_smi_device);
+       platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+       ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+                     art + WNDR3700_WMAC0_MAC_OFFSET,
+                     art + WNDR3700_CALDATA1_OFFSET,
+                     art + WNDR3700_WMAC1_MAC_OFFSET);
 }
 
 MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);