ar71xx: move gpio-buttons support into a spearate file

[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ubnt.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
index 70d4cba929449d6aa8a9f3894d5bfae2a5c9ac3f..5ad59943d8011fc143b645b773eb4c14d3a47ec1 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
@@ -10,16 +10,18 @@
  *  by the Free Software Foundation.
  */
 
+#include <linux/pci.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
 
 #define UBNT_RS_GPIO_LED_RF    2
 #define UBNT_RS_GPIO_SW4       8
@@ -32,32 +34,13 @@
 #define UBNT_LS_SR71_GPIO_LED_D27      6
 #define UBNT_LS_SR71_GPIO_LED_D28      7
 
-#define UBNT_BUTTONS_POLL_INTERVAL     20
-
-static struct spi_board_info ubnt_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-       }
-};
+#define UBNT_M_GPIO_LED_L1     0
+#define UBNT_M_GPIO_LED_L2     1
+#define UBNT_M_GPIO_LED_L3     11
+#define UBNT_M_GPIO_LED_L4     7
+#define UBNT_M_GPIO_BTN_RESET  12
 
-static struct ar71xx_pci_irq ubnt_pci_irqs[] __initdata = {
-       {
-               .slot   = 0,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }, {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }, {
-               .slot   = 2,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV2,
-       }
-};
+#define UBNT_BUTTONS_POLL_INTERVAL     20
 
 static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
        {
@@ -99,6 +82,26 @@ static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
        }
 };
 
+static struct gpio_led ubnt_m_leds_gpio[] __initdata = {
+       {
+               .name           = "ubnt:red:link1",
+               .gpio           = UBNT_M_GPIO_LED_L1,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:orange:link2",
+               .gpio           = UBNT_M_GPIO_LED_L2,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:green:link3",
+               .gpio           = UBNT_M_GPIO_LED_L3,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:green:link4",
+               .gpio           = UBNT_M_GPIO_LED_L4,
+               .active_low     = 0,
+       }
+};
+
 static struct gpio_button ubnt_gpio_buttons[] __initdata = {
        {
                .desc           = "sw4",
@@ -110,16 +113,26 @@ static struct gpio_button ubnt_gpio_buttons[] __initdata = {
        }
 };
 
+static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 5,
+               .gpio           = UBNT_M_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
 static void __init ubnt_generic_setup(void)
 {
-       ar71xx_add_device_spi(NULL, ubnt_spi_info,
-                                   ARRAY_SIZE(ubnt_spi_info));
+       ar71xx_add_device_m25p80(NULL);
 
        ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
                                        ARRAY_SIZE(ubnt_gpio_buttons),
                                        ubnt_gpio_buttons);
 
-       ar71xx_pci_init(ARRAY_SIZE(ubnt_pci_irqs), ubnt_pci_irqs);
+       pb42_pci_init();
 }
 
 #define UBNT_RS_WAN_PHYMASK    (1 << 20)
@@ -206,3 +219,62 @@ static void __init ubnt_lssr71_setup(void)
 }
 
 MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "Ubiquiti LS-SR71", ubnt_lssr71_setup);
+
+static void __init ubnt_m_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ar71xx_set_mac_base(mac);
+
+       ar71xx_add_device_m25p80(NULL);
+
+       ar71xx_add_device_mdio(~0);
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ar71xx_eth0_data.phy_mask = 0;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
+       ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
+       ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
+
+       ar71xx_add_device_eth(0);
+
+       ap91_pci_init(ee, NULL);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
+                                       ubnt_m_leds_gpio);
+
+       ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ubnt_m_gpio_buttons),
+                                       ubnt_m_gpio_buttons);
+}
+
+static void __init ubnt_rocket_m_setup(void)
+{
+       ubnt_m_setup();
+       ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "Ubiquiti Bullet M", ubnt_m_setup);
+MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "Ubiquiti Rocket M", ubnt_rocket_m_setup);
+
+/* TODO detect the second ethernet port and use one
+   init function for all Ubiquiti MIMO series products */
+static void __init ubnt_nano_m_setup(void)
+{
+       ubnt_m_setup();
+
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+       ar71xx_eth1_data.phy_mask = 0;
+       ar71xx_eth1_data.speed = SPEED_1000;
+       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+       ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff;
+       ar71xx_eth1_data.fifo_cfg2 = 0x015500aa;
+       ar71xx_eth1_data.fifo_cfg3 = 0x01f00140;
+
+       ar71xx_add_device_eth(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "Ubiquiti Nanostation M", ubnt_nano_m_setup);