*/
#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition tl_mr3x20_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x290000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3d0000,
- }
+static const char *tl_mr3x20_part_probes[] = {
+ "tp-link",
+ NULL,
};
-#define tl_mr3x20_num_partitions ARRAY_SIZE(tl_mr3x20_partitions)
-#else
-#define tl_mr3x20_partitions NULL
-#define tl_mr3x20_num_partitions 0
-#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_mr3x20_flash_data = {
- .parts = tl_mr3x20_partitions,
- .nr_parts = tl_mr3x20_num_partitions,
+ .part_probes = tl_mr3x20_part_probes,
};
static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
}
};
-static void __init tl_mr3x20_setup(void)
+static void __init tl_ap99_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- /* enable power for the USB port */
- gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
-
ar71xx_add_device_m25p80(&tl_mr3x20_flash_data);
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
- tl_mr3x20_leds_gpio);
-
ar71xx_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_mr3x20_gpio_keys),
tl_mr3x20_gpio_keys);
- ar71xx_eth1_data.has_ar7240_switch = 1;
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1);
- /* WAN port */
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth0_data.speed = SPEED_100;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_eth0_data.phy_mask = BIT(4);
+ ar71xx_add_device_mdio(0, 0x0);
/* LAN ports */
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
- ar71xx_add_device_mdio(0, 0x0);
ar71xx_add_device_eth(1);
+ /* WAN port */
ar71xx_add_device_eth(0);
- ar71xx_add_device_usb();
-
ap91_pci_init(ee, mac);
}
+static void __init tl_mr3x20_usb_setup(void)
+{
+ /* enable power for the USB port */
+ gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
+
+ ar71xx_add_device_usb();
+}
+
static void __init tl_mr3220_setup(void)
{
- tl_mr3x20_setup();
+ tl_ap99_setup();
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
ap91_pci_setup_wmac_led_pin(1);
+ tl_mr3x20_usb_setup();
}
MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
static void __init tl_mr3420_setup(void)
{
- tl_mr3x20_setup();
+ tl_ap99_setup();
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
ap91_pci_setup_wmac_led_pin(0);
+ tl_mr3x20_usb_setup();
}
MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
tl_mr3420_setup);
+
+static void __init tl_wr841n_v7_setup(void)
+{
+ tl_ap99_setup();
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
+ tl_mr3x20_leds_gpio);
+ ap91_pci_setup_wmac_led_pin(0);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V7, "TL-WR841N-v7",
+ "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);