#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1)
#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2)
+#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
+
static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
.sda_pin = PB44_GPIO_I2C_SDA,
.scl_pin = PB44_GPIO_I2C_SCL,
},
};
-static struct gpio_button pb44_gpio_buttons[] __initdata = {
+static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
{
.desc = "soft_reset",
.type = EV_KEY,
.code = KEY_RESTART,
- .threshold = 3,
+ .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
.gpio = PB44_GPIO_SW_RESET,
.active_low = 1,
}, {
.desc = "jumpstart",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
- .threshold = 3,
+ .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
.gpio = PB44_GPIO_SW_JUMP,
.active_low = 1,
}
},
};
+static const char *pb44_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data pb44_flash_data = {
+ .part_probes = pb44_part_probes,
+};
+
static struct spi_board_info pb44_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
+ .platform_data = &pb44_flash_data,
}, {
.bus_num = 0,
.chip_select = 1,
static void __init pb44_init(void)
{
- ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK);
+ ar71xx_add_device_mdio(0, ~PB44_MDIO_PHYMASK);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
pb44_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(pb44_gpio_buttons),
- pb44_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb44_gpio_keys),
+ pb44_gpio_keys);
}
MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init);