ar71xx: reduce button threshold values

[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-mzk-w300nh.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
index 2e9d3bc6e7dff1241fbfc153ae13c40ad3992464..3a38c8285196ab60f4f2aff6073c9479061b0807 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
@@ -9,17 +9,29 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mips_machine.h>
 
 #include <asm/mach-ar71xx/ar71xx.h>
 
+#include "machtype.h"
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define MZK_W300NH_GPIO_LED_STATUS     1
+#define MZK_W300NH_GPIO_LED_WPS                3
+#define MZK_W300NH_GPIO_LED_WLAN       6
+#define MZK_W300NH_GPIO_LED_AP         15
+#define MZK_W300NH_GPIO_LED_ROUTER     16
+
+#define MZK_W300NH_GPIO_BTN_APROUTER   5
+#define MZK_W300NH_GPIO_BTN_WPS                12
+#define MZK_W300NH_GPIO_BTN_RESET      21
+
+#define MZK_W04NU_BUTTONS_POLL_INTERVAL        20
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition mzk_w300nh_partitions[] = {
@@ -33,7 +45,7 @@ static struct mtd_partition mzk_w300nh_partitions[] = {
                .offset         = 0x040000,
                .size           = 0x010000,
        } , {
-               .name           = "uImage",
+               .name           = "kernel",
                .offset         = 0x050000,
                .size           = 0x160000,
        } , {
@@ -49,6 +61,10 @@ static struct mtd_partition mzk_w300nh_partitions[] = {
                .offset         = 0x7e0000,
                .size           = 0x020000,
                .mask_flags     = MTD_WRITEABLE,
+       } , {
+               .name           = "firmware",
+               .offset         = 0x050000,
+               .size           = 0x770000,
        }
 };
 #endif /* CONFIG_MTD_PARTITIONS */
@@ -60,22 +76,85 @@ static struct flash_platform_data mzk_w300nh_flash_data = {
 #endif
 };
 
-static struct spi_board_info mzk_w300nh_spi_info[] = {
+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
        {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &mzk_w300nh_flash_data,
+               .name           = "mzk-w300nh:green:status",
+               .gpio           = MZK_W300NH_GPIO_LED_STATUS,
+               .active_low     = 1,
+       }, {
+               .name           = "mzk-w300nh:blue:wps",
+               .gpio           = MZK_W300NH_GPIO_LED_WPS,
+               .active_low     = 1,
+       }, {
+               .name           = "mzk-w300nh:green:wlan",
+               .gpio           = MZK_W300NH_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "mzk-w300nh:green:ap",
+               .gpio           = MZK_W300NH_GPIO_LED_AP,
+               .active_low     = 1,
+       }, {
+               .name           = "mzk-w300nh:green:router",
+               .gpio           = MZK_W300NH_GPIO_LED_ROUTER,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 3,
+               .gpio           = MZK_W300NH_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 3,
+               .gpio           = MZK_W300NH_GPIO_BTN_WPS,
+               .active_low     = 1,
+       }, {
+               .desc           = "aprouter",
+               .type           = EV_KEY,
+               .code           = BTN_2,
+               .threshold      = 3,
+               .gpio           = MZK_W300NH_GPIO_BTN_APROUTER,
+               .active_low     = 0,
        }
 };
 
 static void __init mzk_w300nh_setup(void)
 {
-       ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
-                                       ARRAY_SIZE(mzk_w300nh_spi_info));
+       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ar71xx_set_mac_base(eeprom);
+
+       ar71xx_add_device_mdio(0x0);
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+       ar71xx_eth0_data.phy_mask = 0xf;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.has_ar8216 = 1;
+
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+       ar71xx_eth1_data.phy_mask = 0x10;
+
+       ar71xx_add_device_eth(0);
+       ar71xx_add_device_eth(1);
+
+       ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
+                                   mzk_w300nh_leds_gpio);
 
-       ar91xx_add_device_wmac();
+       ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
+                                      ARRAY_SIZE(mzk_w300nh_gpio_buttons),
+                                      mzk_w300nh_gpio_buttons);
+       ar913x_add_device_wmac(eeprom, NULL);
 }
 
-MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "Planex MZK-W300NH", mzk_w300nh_setup);
+MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
+            mzk_w300nh_setup);