#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
-#include "dev-ap91-eth.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define DIR_600_A1_GPIO_BTN_RESET 8
#define DIR_600_A1_GPIO_BTN_WPS 12
-#define DIR_600_A1_BUTTONS_POLL_INTERVAL 20
+#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
#define DIR_600_A1_NVRAM_ADDR 0x1f030000
#define DIR_600_A1_NVRAM_SIZE 0x10000
static struct flash_platform_data dir_600_a1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
- .parts = dir_600_a1_partitions,
- .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
+ .parts = dir_600_a1_partitions,
+ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
#endif
};
}
};
-static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
+static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
- .code = BTN_0,
- .threshold = 3,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
.gpio = DIR_600_A1_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
- .code = BTN_1,
- .threshold = 3,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
.gpio = DIR_600_A1_GPIO_BTN_WPS,
.active_low = 1,
}
u8 *mac = NULL;
if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
- "lan_mac=", mac_buff) == 0)
+ "lan_mac=", mac_buff) == 0) {
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1);
mac = mac_buff;
+ }
ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
dir_600_a1_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(dir_600_a1_gpio_buttons),
- dir_600_a1_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_600_a1_gpio_keys),
+ dir_600_a1_gpio_keys);
+
+ ar71xx_eth1_data.has_ar7240_switch = 1;
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.phy_mask = BIT(4);
+
+ /* LAN ports */
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_mdio(0, 0x0);
+ ar71xx_add_device_eth(1);
+ ar71xx_add_device_eth(0);
- ap91_eth_init(mac, NULL);
ap91_pci_init(ee, mac);
}