ar71xx: move gpio-buttons support into a spearate file

[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap81.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
index 98a319aa7a9b2a54807f43efaa9996ebff82226a..5790dc807fda691884e4adaf119ceee36be90939 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
@@ -12,14 +12,20 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define AP81_GPIO_LED_STATUS   1
+#define AP81_GPIO_LED_AOSS     3
+#define AP81_GPIO_LED_WLAN     6
+#define AP81_GPIO_LED_POWER    14
 
 #define AP81_GPIO_BTN_SW4      12
 #define AP81_GPIO_BTN_SW1      21
@@ -61,13 +67,23 @@ static struct flash_platform_data ap81_flash_data = {
 #endif
 };
 
-static struct spi_board_info ap81_spi_info[] = {
+static struct gpio_led ap81_leds_gpio[] __initdata = {
        {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &ap81_flash_data,
+               .name           = "ap81:green:status",
+               .gpio           = AP81_GPIO_LED_STATUS,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:amber:aoss",
+               .gpio           = AP81_GPIO_LED_AOSS,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:green:wlan",
+               .gpio           = AP81_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:green:power",
+               .gpio           = AP81_GPIO_LED_POWER,
+               .active_low     = 1,
        }
 };
 
@@ -91,6 +107,9 @@ static struct gpio_button ap81_gpio_buttons[] __initdata = {
 
 static void __init ap81_setup(void)
 {
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ar71xx_set_mac_base(mac);
        ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
@@ -107,14 +126,16 @@ static void __init ap81_setup(void)
 
        ar71xx_add_device_usb();
 
-       ar71xx_add_device_spi(NULL, ap81_spi_info,
-                             ARRAY_SIZE(ap81_spi_info));
+       ar71xx_add_device_m25p80(&ap81_flash_data);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
+                                       ap81_leds_gpio);
 
        ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
                                        ARRAY_SIZE(ap81_gpio_buttons),
                                        ap81_gpio_buttons);
 
-       ar91xx_add_device_wmac();
+       ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);