adm5120: add support for 3.6

[oweals/openwrt.git] / target / linux / ar7 / config-3.3

diff --git a/target/linux/ar7/config-3.3 b/target/linux/ar7/config-3.3
index 35c105996bc307bfbc8eefa9d3c15632a1f7d369..7646ba1458e3c617a1e2fb8d87c28f9b26cea8e0 100644 (file)
--- a/target/linux/ar7/config-3.3
+++ b/target/linux/ar7/config-3.3
@@ -4,18 +4,15 @@ CONFIG_AR7_GPIO=y
 CONFIG_AR7_WDT=y
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BCMA_POSSIBLE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
 CONFIG_CPMAC=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_CPU_HAS_SYNC=y
@@ -31,12 +28,12 @@ CONFIG_CSRC_R4K_LIB=y
 CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FIXED_PHY=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GPIOLIB=y
@@ -74,15 +71,15 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_KALLSYMS=y
 CONFIG_KERNEL_GZIP=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
 CONFIG_MIPS=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MACHINE is not set
 CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AR7_PARTS=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MVSWITCH_PHY=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NO_EXCEPT_FILL=y
@@ -90,7 +87,6 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_SWCONFIG=y
@@ -103,5 +99,4 @@ CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_VLYNQ=y
 # CONFIG_VLYNQ_DEBUG is not set
-CONFIG_XZ_DEC=y
 CONFIG_ZONE_DMA_FLAG=0