* [including the GNU Public Licence.]
*/
/* ====================================================================
- * Copyright (c) 1998-1999 The OpenSSL Project. All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
#include <stdio.h>
#include <errno.h>
#define USE_SOCKETS
+#include "ssl_locl.h"
#include <openssl/evp.h>
#include <openssl/buffer.h>
-#include "ssl_locl.h"
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
- unsigned int len);
+ unsigned int len, int create_empty_fragment);
static int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
unsigned int len);
static int ssl3_get_record(SSL *s);
static int do_uncompress(SSL *ssl);
static int do_change_cipher_spec(SSL *ssl);
+/* used only by ssl3_get_record */
static int ssl3_read_n(SSL *s, int n, int max, int extend)
{
/* If extend == 0, obtain new n-byte packet; if extend == 1, increase
{
/* avoid buffer overflow */
- int max_max = SSL3_RT_MAX_PACKET_SIZE - s->packet_length;
- if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
- max_max += SSL3_RT_MAX_EXTRA;
+ int max_max = s->s3->rbuf.len - s->packet_length;
if (max > max_max)
max = max_max;
}
if (n > max) /* does not happen */
{
- SSLerr(SSL_F_SSL3_READ_N,SSL_R_INTERNAL_ERROR);
+ SSLerr(SSL_F_SSL3_READ_N,ERR_R_INTERNAL_ERROR);
return -1;
}
memmove(s->s3->rbuf.buf, s->packet, off+newb);
s->packet = s->s3->rbuf.buf;
}
-
+
while (newb < n)
{
/* Now we have off+newb bytes at the front of s->s3->rbuf.buf and need
* ssl->s3->rrec.data, - data
* ssl->s3->rrec.length, - number of bytes
*/
+/* used only by ssl3_read_bytes */
static int ssl3_get_record(SSL *s)
{
int ssl_major,ssl_minor,al;
- int n,i,ret= -1;
- SSL3_BUFFER *rb;
+ int enc_err,n,i,ret= -1;
SSL3_RECORD *rr;
SSL_SESSION *sess;
unsigned char *p;
unsigned char md[EVP_MAX_MD_SIZE];
short version;
unsigned int mac_size;
- int clear=0,extra;
+ int clear=0;
+ size_t extra;
+ int decryption_failed_or_bad_record_mac = 0;
+ unsigned char *mac = NULL;
rr= &(s->s3->rrec);
- rb= &(s->s3->rbuf);
sess=s->session;
if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
extra=SSL3_RT_MAX_EXTRA;
else
extra=0;
+ if (extra != s->s3->rbuf.len - SSL3_RT_MAX_PACKET_SIZE)
+ {
+ /* actually likely an application error: SLS_OP_MICROSOFT_BIG_SSLV3_BUFFER
+ * set after ssl3_setup_buffers() was done */
+ SSLerr(SSL_F_SSL3_GET_RECORD, ERR_R_INTERNAL_ERROR);
+ return -1;
+ }
again:
/* check if we have the header */
if ( (s->rstate != SSL_ST_READ_BODY) ||
(s->packet_length < SSL3_RT_HEADER_LENGTH))
{
- n=ssl3_read_n(s,SSL3_RT_HEADER_LENGTH,
- SSL3_RT_MAX_PACKET_SIZE,0);
+ n=ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
if (n <= 0) return(n); /* error or non-blocking */
s->rstate=SSL_ST_READ_BODY;
goto err;
}
- if (rr->length >
- (unsigned int)SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
+ if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
{
al=SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_PACKET_LENGTH_TOO_LONG);
/* s->rstate == SSL_ST_READ_BODY, get and decode the data */
- if (rr->length > (s->packet_length-SSL3_RT_HEADER_LENGTH))
+ if (rr->length > s->packet_length-SSL3_RT_HEADER_LENGTH)
{
/* now s->packet_length == SSL3_RT_HEADER_LENGTH */
i=rr->length;
* rr->length bytes of encrypted compressed stuff. */
/* check is not needed I believe */
- if (rr->length > (unsigned int)SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
+ if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
{
al=SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
/* decrypt in place in 'rr->input' */
rr->data=rr->input;
- if (!s->method->ssl3_enc->enc(s,0))
+ enc_err = s->method->ssl3_enc->enc(s,0);
+ if (enc_err <= 0)
{
- al=SSL_AD_DECRYPT_ERROR;
- goto f_err;
+ if (enc_err == 0)
+ /* SSLerr() and ssl3_send_alert() have been called */
+ goto err;
+
+ /* Otherwise enc_err == -1, which indicates bad padding
+ * (rec->length has not been changed in this case).
+ * To minimize information leaked via timing, we will perform
+ * the MAC computation anyway. */
+ decryption_failed_or_bad_record_mac = 1;
}
+
#ifdef TLS_DEBUG
printf("dec %d\n",rr->length);
{ unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
printf("\n");
#endif
+
/* r->length is now the compressed data plus mac */
if ( (sess == NULL) ||
(s->enc_read_ctx == NULL) ||
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra+mac_size)
{
+#if 0 /* OK only for stream ciphers (then rr->length is visible from ciphertext anyway) */
al=SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG);
goto f_err;
+#else
+ decryption_failed_or_bad_record_mac = 1;
+#endif
}
/* check the MAC for rr->input (it's in mac_size bytes at the tail) */
- if (rr->length < mac_size)
+ if (rr->length >= mac_size)
+ {
+ rr->length -= mac_size;
+ mac = &rr->data[rr->length];
+ }
+ else
{
+ /* record (minus padding) is too short to contain a MAC */
+#if 0 /* OK only for stream ciphers */
al=SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_LENGTH_TOO_SHORT);
goto f_err;
+#else
+ decryption_failed_or_bad_record_mac = 1;
+ rr->length = 0;
+#endif
}
- rr->length-=mac_size;
i=s->method->ssl3_enc->mac(s,md,0);
- if (memcmp(md,&(rr->data[rr->length]),mac_size) != 0)
+ if (mac == NULL || memcmp(md, mac, mac_size) != 0)
{
- al=SSL_AD_BAD_RECORD_MAC;
- SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_BAD_MAC_DECODE);
- ret= -1;
- goto f_err;
+ decryption_failed_or_bad_record_mac = 1;
}
}
+ if (decryption_failed_or_bad_record_mac)
+ {
+ /* A separate 'decryption_failed' alert was introduced with TLS 1.0,
+ * SSL 3.0 only has 'bad_record_mac'. But unless a decryption
+ * failure is directly visible from the ciphertext anyway,
+ * we should not reveal which kind of error occured -- this
+ * might become visible to an attacker (e.g. via a logfile) */
+ al=SSL_AD_BAD_RECORD_MAC;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
+ goto f_err;
+ }
+
/* r->length is now just compressed */
if (s->expand != NULL)
{
- if (rr->length >
- (unsigned int)SSL3_RT_MAX_COMPRESSED_LENGTH+extra)
+ if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra)
{
al=SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
}
}
- if (rr->length > (unsigned int)SSL3_RT_MAX_PLAIN_LENGTH+extra)
+ if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH+extra)
{
al=SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
if (rr->length == 0) goto again;
return(1);
+
f_err:
ssl3_send_alert(s,SSL3_AL_FATAL,al);
err:
if (i == 0)
{
SSLerr(SSL_F_SSL3_WRITE_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
- return(-1);
+ return -1;
}
}
nw=SSL3_RT_MAX_PLAIN_LENGTH;
else
nw=n;
-
- i=do_ssl3_write(s,type,&(buf[tot]),nw);
+
+ i=do_ssl3_write(s, type, &(buf[tot]), nw, 0);
if (i <= 0)
{
s->s3->wnum=tot;
- return(i);
+ return i;
}
- if (type == SSL3_RT_HANDSHAKE)
- ssl3_finish_mac(s,&(buf[tot]),i);
-
if ((i == (int)n) ||
(type == SSL3_RT_APPLICATION_DATA &&
(s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE)))
{
- return(tot+i);
+ /* next chunk of data should get another prepended empty fragment
+ * in ciphersuites with known-IV weakness: */
+ s->s3->empty_fragment_done = 0;
+
+ return tot+i;
}
n-=i;
}
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
- unsigned int len)
+ unsigned int len, int create_empty_fragment)
{
unsigned char *p,*plen;
int i,mac_size,clear=0;
+ int prefix_len = 0;
SSL3_RECORD *wr;
SSL3_BUFFER *wb;
SSL_SESSION *sess;
- /* first check is there is a SSL3_RECORD still being written
+ /* first check if there is a SSL3_BUFFER still being written
* out. This will happen with non blocking IO */
if (s->s3->wbuf.left != 0)
return(ssl3_write_pending(s,type,buf,len));
/* if it went, fall through and send more stuff */
}
- if (len == 0) return(len);
-
+ if (len == 0 && !create_empty_fragment)
+ return 0;
+
wr= &(s->s3->wrec);
wb= &(s->s3->wbuf);
sess=s->session;
else
mac_size=EVP_MD_size(s->write_hash);
- p=wb->buf;
+ /* 'create_empty_fragment' is true only when this function calls itself */
+ if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done)
+ {
+ /* countermeasure against known-IV weakness in CBC ciphersuites
+ * (see http://www.openssl.org/~bodo/tls-cbc.txt) */
+
+ if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
+ {
+ /* recursive function call with 'create_empty_fragment' set;
+ * this prepares and buffers the data for an empty fragment
+ * (these 'prefix_len' bytes are sent out later
+ * together with the actual payload) */
+ prefix_len = do_ssl3_write(s, type, buf, 0, 1);
+ if (prefix_len <= 0)
+ goto err;
+
+ if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE)
+ {
+ /* insufficient space */
+ SSLerr(SSL_F_DO_SSL3_WRITE, ERR_R_INTERNAL_ERROR);
+ goto err;
+ }
+ }
+
+ s->s3->empty_fragment_done = 1;
+ }
+
+ p = wb->buf + prefix_len;
/* write the header */
+
*(p++)=type&0xff;
wr->type=type;
*(p++)=(s->version>>8);
*(p++)=s->version&0xff;
-
- /* record where we are to write out packet length */
+
+ /* field where we are to write out packet length */
plen=p;
p+=2;
-
+
/* lets setup the record stuff. */
wr->data=p;
wr->length=(int)len;
wr->type=type; /* not needed but helps for debugging */
wr->length+=SSL3_RT_HEADER_LENGTH;
- /* Now lets setup wb */
- wb->left=wr->length;
- wb->offset=0;
+ if (create_empty_fragment)
+ {
+ /* we are in a recursive call;
+ * just return the length, don't write out anything here
+ */
+ return wr->length;
+ }
+
+ /* now let's set up wb */
+ wb->left = prefix_len + wr->length;
+ wb->offset = 0;
+ /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
s->s3->wpend_tot=len;
s->s3->wpend_buf=buf;
s->s3->wpend_type=type;
s->s3->wpend_ret=len;
/* we now just need to write the buffer */
- return(ssl3_write_pending(s,type,buf,len));
+ return ssl3_write_pending(s,type,buf,len);
err:
- return(-1);
+ return -1;
}
/* if s->s3->wbuf.left != 0, we need to call this */
}
}
-int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len)
+/* Return up to 'len' payload bytes received in 'type' records.
+ * 'type' is one of the following:
+ *
+ * - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
+ * - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
+ * - 0 (during a shutdown, no data has to be returned)
+ *
+ * If we don't have stored data to work from, read a SSL/TLS record first
+ * (possibly multiple records if we still don't have anything to return).
+ *
+ * This function must handle any surprises the peer may have for us, such as
+ * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
+ * a surprise, but handled as if it were), or renegotiation requests.
+ * Also if record payloads contain fragments too small to process, we store
+ * them until there is enough for the respective protocol (the record protocol
+ * may use arbitrary fragmentation and even interleaving):
+ * Change cipher spec protocol
+ * just 1 byte needed, no need for keeping anything stored
+ * Alert protocol
+ * 2 bytes needed (AlertLevel, AlertDescription)
+ * Handshake protocol
+ * 4 bytes needed (HandshakeType, uint24 length) -- we just have
+ * to detect unexpected Client Hello and Hello Request messages
+ * here, anything else is handled by higher layers
+ * Application data protocol
+ * none of our business
+ */
+int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
{
- int al,i,j,n,ret;
+ int al,i,j,ret;
+ unsigned int n;
SSL3_RECORD *rr;
- void (*cb)()=NULL;
- BIO *bio;
+ void (*cb)(const SSL *ssl,int type2,int val)=NULL;
if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
if (!ssl3_setup_buffers(s))
return(-1);
+ if ((type && (type != SSL3_RT_APPLICATION_DATA) && (type != SSL3_RT_HANDSHAKE) && type) ||
+ (peek && (type != SSL3_RT_APPLICATION_DATA)))
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
+ return -1;
+ }
+
+ if ((type == SSL3_RT_HANDSHAKE) && (s->s3->handshake_fragment_len > 0))
+ /* (partially) satisfy request from storage */
+ {
+ unsigned char *src = s->s3->handshake_fragment;
+ unsigned char *dst = buf;
+ unsigned int k;
+
+ /* peek == 0 */
+ n = 0;
+ while ((len > 0) && (s->s3->handshake_fragment_len > 0))
+ {
+ *dst++ = *src++;
+ len--; s->s3->handshake_fragment_len--;
+ n++;
+ }
+ /* move any remaining fragment bytes: */
+ for (k = 0; k < s->s3->handshake_fragment_len; k++)
+ s->s3->handshake_fragment[k] = *src++;
+ return n;
+ }
+
+ /* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
+
if (!s->in_handshake && SSL_in_init(s))
{
+ /* type == SSL3_RT_APPLICATION_DATA */
i=s->handshake_func(s);
if (i < 0) return(i);
if (i == 0)
* s->s3->rrec.data, - data
* s->s3->rrec.off, - offset into 'data' for next read
* s->s3->rrec.length, - number of bytes. */
- rr= &(s->s3->rrec);
+ rr = &(s->s3->rrec);
- /* get new packet */
+ /* get new packet if necessary */
if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
{
ret=ssl3_get_record(s);
/* we now have a packet which can be read and processed */
- if (s->s3->change_cipher_spec && (rr->type != SSL3_RT_HANDSHAKE))
+ if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
+ * reset by ssl3_get_finished */
+ && (rr->type != SSL3_RT_HANDSHAKE))
{
al=SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
goto err;
}
- /* If the other end has shutdown, throw anything we read away */
+ /* If the other end has shut down, throw anything we read away
+ * (even in 'peek' mode) */
if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
{
rr->length=0;
return(0);
}
- /* Check for an incoming 'Hello Request' message from client */
- if ((rr->type == SSL3_RT_HANDSHAKE) && (rr->length == 4) &&
- (rr->data[0] == SSL3_MT_HELLO_REQUEST) &&
+
+ if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
+ {
+ /* make sure that we are not getting application data when we
+ * are doing a handshake for the first time */
+ if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
+ (s->enc_read_ctx == NULL))
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
+ goto f_err;
+ }
+
+ if (len <= 0) return(len);
+
+ if ((unsigned int)len > rr->length)
+ n = rr->length;
+ else
+ n = (unsigned int)len;
+
+ memcpy(buf,&(rr->data[rr->off]),n);
+ if (!peek)
+ {
+ rr->length-=n;
+ rr->off+=n;
+ if (rr->length == 0)
+ {
+ s->rstate=SSL_ST_READ_HEADER;
+ rr->off=0;
+ }
+ }
+ return(n);
+ }
+
+
+ /* If we get here, then type != rr->type; if we have a handshake
+ * message, then it was unexpected (Hello Request or Client Hello). */
+
+ /* In case of record types for which we have 'fragment' storage,
+ * fill that so that we can process the data at a fixed place.
+ */
+ {
+ unsigned int dest_maxlen = 0;
+ unsigned char *dest = NULL;
+ unsigned int *dest_len = NULL;
+
+ if (rr->type == SSL3_RT_HANDSHAKE)
+ {
+ dest_maxlen = sizeof s->s3->handshake_fragment;
+ dest = s->s3->handshake_fragment;
+ dest_len = &s->s3->handshake_fragment_len;
+ }
+ else if (rr->type == SSL3_RT_ALERT)
+ {
+ dest_maxlen = sizeof s->s3->alert_fragment;
+ dest = s->s3->alert_fragment;
+ dest_len = &s->s3->alert_fragment_len;
+ }
+
+ if (dest_maxlen > 0)
+ {
+ n = dest_maxlen - *dest_len; /* available space in 'dest' */
+ if (rr->length < n)
+ n = rr->length; /* available bytes */
+
+ /* now move 'n' bytes: */
+ while (n-- > 0)
+ {
+ dest[(*dest_len)++] = rr->data[rr->off++];
+ rr->length--;
+ }
+
+ if (*dest_len < dest_maxlen)
+ goto start; /* fragment was too small */
+ }
+ }
+
+ /* s->s3->handshake_fragment_len == 4 iff rr->type == SSL3_RT_HANDSHAKE;
+ * s->s3->alert_fragment_len == 2 iff rr->type == SSL3_RT_ALERT.
+ * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
+
+ /* If we are a client, check for an incoming 'Hello Request': */
+ if ((!s->server) &&
+ (s->s3->handshake_fragment_len >= 4) &&
+ (s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
(s->session != NULL) && (s->session->cipher != NULL))
{
- if ((rr->data[1] != 0) || (rr->data[2] != 0) ||
- (rr->data[3] != 0))
+ s->s3->handshake_fragment_len = 0;
+
+ if ((s->s3->handshake_fragment[1] != 0) ||
+ (s->s3->handshake_fragment[2] != 0) ||
+ (s->s3->handshake_fragment[3] != 0))
{
al=SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
goto err;
}
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, s->s3->handshake_fragment, 4, s, s->msg_callback_arg);
+
if (SSL_is_init_finished(s) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
!s->s3->renegotiate)
ssl3_renegotiate(s);
if (ssl3_renegotiate_check(s))
{
- n=s->handshake_func(s);
- if (n < 0) return(n);
- if (n == 0)
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
{
SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
return(-1);
}
+
+ if (!(s->mode & SSL_MODE_AUTO_RETRY))
+ {
+ if (s->s3->rbuf.left == 0) /* no read-ahead left? */
+ {
+ BIO *bio;
+ /* In the case where we try to read application data,
+ * but we trigger an SSL handshake, we return -1 with
+ * the retry option set. Otherwise renegotiation may
+ * cause nasty problems in the blocking world */
+ s->rwstate=SSL_READING;
+ bio=SSL_get_rbio(s);
+ BIO_clear_retry_flags(bio);
+ BIO_set_retry_read(bio);
+ return(-1);
+ }
+ }
}
}
- rr->length=0;
-/* ZZZ */ goto start;
+ /* we either finished a handshake or ignored the request,
+ * now try again to obtain the (application) data we were asked for */
+ goto start;
}
- /* if it is not the type we want, or we have shutdown and want
- * the peer shutdown */
- if ((rr->type != type) || (s->shutdown & SSL_SENT_SHUTDOWN))
+ if (s->s3->alert_fragment_len >= 2)
{
- if (rr->type == SSL3_RT_ALERT)
- {
- if ((rr->length != 2) || (rr->off != 0))
- {
- al=SSL_AD_DECODE_ERROR;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_ALERT_RECORD);
- goto f_err;
- }
+ int alert_level = s->s3->alert_fragment[0];
+ int alert_descr = s->s3->alert_fragment[1];
- i=rr->data[0];
- n=rr->data[1];
+ s->s3->alert_fragment_len = 0;
- /* clear from buffer */
- rr->length=0;
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_ALERT, s->s3->alert_fragment, 2, s, s->msg_callback_arg);
- if (s->info_callback != NULL)
- cb=s->info_callback;
- else if (s->ctx->info_callback != NULL)
- cb=s->ctx->info_callback;
+ if (s->info_callback != NULL)
+ cb=s->info_callback;
+ else if (s->ctx->info_callback != NULL)
+ cb=s->ctx->info_callback;
- if (cb != NULL)
- {
- j=(i<<8)|n;
- cb(s,SSL_CB_READ_ALERT,j);
- }
+ if (cb != NULL)
+ {
+ j = (alert_level << 8) | alert_descr;
+ cb(s, SSL_CB_READ_ALERT, j);
+ }
- if (i == 1) /* warning */
- {
- s->s3->warn_alert=n;
- if (n == SSL_AD_CLOSE_NOTIFY)
- {
- s->shutdown|=SSL_RECEIVED_SHUTDOWN;
- return(0);
- }
- }
- else if (i == 2) /* fatal */
+ if (alert_level == 1) /* warning */
+ {
+ s->s3->warn_alert = alert_descr;
+ if (alert_descr == SSL_AD_CLOSE_NOTIFY)
{
- char tmp[16];
-
- s->rwstate=SSL_NOTHING;
- s->s3->fatal_alert=n;
- SSLerr(SSL_F_SSL3_READ_BYTES,
- SSL_AD_REASON_OFFSET+n);
- sprintf(tmp,"%d",n);
- ERR_add_error_data(2,"SSL alert number ",tmp);
- s->shutdown|=SSL_RECEIVED_SHUTDOWN;
- SSL_CTX_remove_session(s->ctx,s->session);
+ s->shutdown |= SSL_RECEIVED_SHUTDOWN;
return(0);
}
- else
- {
- al=SSL_AD_ILLEGAL_PARAMETER;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
- goto f_err;
- }
-
- rr->length=0;
- goto start;
}
-
- if (s->shutdown & SSL_SENT_SHUTDOWN)
+ else if (alert_level == 2) /* fatal */
{
+ char tmp[16];
+
s->rwstate=SSL_NOTHING;
- rr->length=0;
+ s->s3->fatal_alert = alert_descr;
+ SSLerr(SSL_F_SSL3_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
+ BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
+ ERR_add_error_data(2,"SSL alert number ",tmp);
+ s->shutdown|=SSL_RECEIVED_SHUTDOWN;
+ SSL_CTX_remove_session(s->ctx,s->session);
return(0);
}
-
- if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
+ else
{
- if ( (rr->length != 1) || (rr->off != 0) ||
- (rr->data[0] != SSL3_MT_CCS))
- {
- i=SSL_AD_ILLEGAL_PARAMETER;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
- goto err;
- }
-
- rr->length=0;
- s->s3->change_cipher_spec=1;
- if (!do_change_cipher_spec(s))
- goto err;
- else
- goto start;
+ al=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
+ goto f_err;
}
- /* else we have a handshake */
- if ((rr->type == SSL3_RT_HANDSHAKE) &&
- !s->in_handshake)
+ goto start;
+ }
+
+ if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
+ {
+ s->rwstate=SSL_NOTHING;
+ rr->length=0;
+ return(0);
+ }
+
+ if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
+ {
+ /* 'Change Cipher Spec' is just a single byte, so we know
+ * exactly what the record payload has to look like */
+ if ( (rr->length != 1) || (rr->off != 0) ||
+ (rr->data[0] != SSL3_MT_CCS))
{
- if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
- !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
- {
- s->state=SSL_ST_BEFORE|(s->server)
- ?SSL_ST_ACCEPT
- :SSL_ST_CONNECT;
- s->new_session=1;
- }
- n=s->handshake_func(s);
- if (n < 0) return(n);
- if (n == 0)
- {
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
- return(-1);
- }
+ i=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
+ goto err;
+ }
- /* In the case where we try to read application data
- * the first time, but we trigger an SSL handshake, we
- * return -1 with the retry option set. I do this
- * otherwise renegotiation can cause nasty problems
- * in the non-blocking world */
+ rr->length=0;
- s->rwstate=SSL_READING;
- bio=SSL_get_rbio(s);
- BIO_clear_retry_flags(bio);
- BIO_set_retry_read(bio);
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data, 1, s, s->msg_callback_arg);
+
+ s->s3->change_cipher_spec=1;
+ if (!do_change_cipher_spec(s))
+ goto err;
+ else
+ goto start;
+ }
+
+ /* Unexpected handshake message (Client Hello, or protocol violation) */
+ if ((s->s3->handshake_fragment_len >= 4) && !s->in_handshake)
+ {
+ if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
+ !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
+ {
+#if 0 /* worked only because C operator preferences are not as expected (and
+ * because this is not really needed for clients except for detecting
+ * protocol violations): */
+ s->state=SSL_ST_BEFORE|(s->server)
+ ?SSL_ST_ACCEPT
+ :SSL_ST_CONNECT;
+#else
+ s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
+#endif
+ s->new_session=1;
+ }
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
return(-1);
}
- switch (rr->type)
+ if (!(s->mode & SSL_MODE_AUTO_RETRY))
{
- default:
-#ifndef NO_TLS
- /* TLS just ignores unknown message types */
- if (s->version == TLS1_VERSION)
- {
- goto start;
- }
-#endif
- case SSL3_RT_CHANGE_CIPHER_SPEC:
- case SSL3_RT_ALERT:
- case SSL3_RT_HANDSHAKE:
- al=SSL_AD_UNEXPECTED_MESSAGE;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
- goto f_err;
- case SSL3_RT_APPLICATION_DATA:
- /* At this point, we were expecting something else,
- * but have application data. What we do is set the
- * error, and return -1. On the way out, if the
- * library was running inside ssl3_read() and it makes
- * sense to read application data at this point, we
- * will indulge it. This will mostly happen during
- * session renegotiation.
- */
- if (s->s3->in_read_app_data &&
- (s->s3->total_renegotiations != 0) &&
- ((
- (s->state & SSL_ST_CONNECT) &&
- (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
- (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
- ) || (
- (s->state & SSL_ST_ACCEPT) &&
- (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
- (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
- )
- ))
+ if (s->s3->rbuf.left == 0) /* no read-ahead left? */
{
- s->s3->in_read_app_data=0;
+ BIO *bio;
+ /* In the case where we try to read application data,
+ * but we trigger an SSL handshake, we return -1 with
+ * the retry option set. Otherwise renegotiation may
+ * cause nasty problems in the blocking world */
+ s->rwstate=SSL_READING;
+ bio=SSL_get_rbio(s);
+ BIO_clear_retry_flags(bio);
+ BIO_set_retry_read(bio);
return(-1);
}
- else
- {
- al=SSL_AD_UNEXPECTED_MESSAGE;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
- goto f_err;
- }
}
- /* not reached */
+ goto start;
}
- /* rr->type == type */
-
- /* make sure that we are not getting application data when we
- * are doing a handshake for the first time */
- if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
- (s->enc_read_ctx == NULL))
+ switch (rr->type)
{
+ default:
+#ifndef OPENSSL_NO_TLS
+ /* TLS just ignores unknown message types */
+ if (s->version == TLS1_VERSION)
+ {
+ rr->length = 0;
+ goto start;
+ }
+#endif
al=SSL_AD_UNEXPECTED_MESSAGE;
- SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
goto f_err;
+ case SSL3_RT_CHANGE_CIPHER_SPEC:
+ case SSL3_RT_ALERT:
+ case SSL3_RT_HANDSHAKE:
+ /* we already handled all of these, with the possible exception
+ * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
+ * should not happen when type != rr->type */
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,ERR_R_INTERNAL_ERROR);
+ goto f_err;
+ case SSL3_RT_APPLICATION_DATA:
+ /* At this point, we were expecting handshake data,
+ * but have application data. If the library was
+ * running inside ssl3_read() (i.e. in_read_app_data
+ * is set) and it makes sense to read application data
+ * at this point (session renegotiation not yet started),
+ * we will indulge it.
+ */
+ if (s->s3->in_read_app_data &&
+ (s->s3->total_renegotiations != 0) &&
+ ((
+ (s->state & SSL_ST_CONNECT) &&
+ (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
+ (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
+ ) || (
+ (s->state & SSL_ST_ACCEPT) &&
+ (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
+ (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
+ )
+ ))
+ {
+ s->s3->in_read_app_data=2;
+ return(-1);
+ }
+ else
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
+ goto f_err;
+ }
}
+ /* not reached */
- if (len <= 0) return(len);
-
- if ((unsigned int)len > rr->length)
- n=rr->length;
- else
- n=len;
-
- memcpy(buf,&(rr->data[rr->off]),(unsigned int)n);
- rr->length-=n;
- rr->off+=n;
- if (rr->length == 0)
- {
- s->rstate=SSL_ST_READ_HEADER;
- rr->off=0;
- }
-
- if (type == SSL3_RT_HANDSHAKE)
- ssl3_finish_mac(s,buf,n);
- return(n);
f_err:
ssl3_send_alert(s,SSL3_AL_FATAL,al);
err:
return(1);
}
-/* send s->init_buf in records of type 'type' */
-int ssl3_do_write(SSL *s, int type)
- {
- int ret;
-
- ret=ssl3_write_bytes(s,type,&s->init_buf->data[s->init_off],
- s->init_num);
- if (ret == s->init_num)
- return(1);
- if (ret < 0) return(-1);
- s->init_off+=ret;
- s->init_num-=ret;
- return(0);
- }
-
void ssl3_send_alert(SSL *s, int level, int desc)
{
/* Map tls/ssl alert value to correct one */
desc=s->method->ssl3_enc->alert_value(desc);
+ if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION)
+ desc = SSL_AD_HANDSHAKE_FAILURE; /* SSL 3.0 does not have protocol_version alerts */
if (desc < 0) return;
/* If a fatal one, remove from cache */
if ((level == 2) && (s->session != NULL))
s->s3->alert_dispatch=1;
s->s3->send_alert[0]=level;
s->s3->send_alert[1]=desc;
- if (s->s3->wbuf.left == 0) /* data still being written out */
+ if (s->s3->wbuf.left == 0) /* data still being written out? */
ssl3_dispatch_alert(s);
/* else data is still being written out, we will get written
* some time in the future */
int ssl3_dispatch_alert(SSL *s)
{
int i,j;
- void (*cb)()=NULL;
+ void (*cb)(const SSL *ssl,int type,int val)=NULL;
s->s3->alert_dispatch=0;
- i=do_ssl3_write(s,SSL3_RT_ALERT,&s->s3->send_alert[0],2);
+ i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0);
if (i <= 0)
{
s->s3->alert_dispatch=1;
}
else
{
- /* If it is important, send it now. If the message
- * does not get sent due to non-blocking IO, we will
- * not worry too much. */
+ /* Alert sent to BIO. If it is important, flush it now.
+ * If the message does not get sent due to non-blocking IO,
+ * we will not worry too much. */
if (s->s3->send_alert[0] == SSL3_AL_FATAL)
(void)BIO_flush(s->wbio);
+ if (s->msg_callback)
+ s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, 2, s, s->msg_callback_arg);
+
if (s->info_callback != NULL)
cb=s->info_callback;
else if (s->ctx->info_callback != NULL)
cb=s->ctx->info_callback;
-
+
if (cb != NULL)
{
j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];