#endif
static unsigned char bitmask_start_values[] = {0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80};
-static unsigned char bitmask_end_values[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f};
+static unsigned char bitmask_end_values[] = {0xff, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f};
/* XDTLS: figure out the right values */
static unsigned int g_probable_mtu[] = {1500 - 28, 512 - 28, 256 - 28};
-static unsigned int dtls1_min_mtu(void);
static unsigned int dtls1_guess_mtu(unsigned int curr_mtu);
static void dtls1_fix_message_header(SSL *s, unsigned long frag_off,
unsigned long frag_len);
unsigned int len, frag_off, mac_size, blocksize;
/* AHA! Figure out the MTU, and stick to the right size */
- if ( ! (SSL_get_options(s) & SSL_OP_NO_QUERY_MTU))
+ if (s->d1->mtu < dtls1_min_mtu() && !(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU))
{
s->d1->mtu =
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL);
/* I've seen the kernel return bogus numbers when it doesn't know
* (initial write), so just make sure we have a reasonable number */
- if ( s->d1->mtu < dtls1_min_mtu())
+ if (s->d1->mtu < dtls1_min_mtu())
{
s->d1->mtu = 0;
s->d1->mtu = dtls1_guess_mtu(s->d1->mtu);
return ret;
mtu = s->d1->mtu - (DTLS1_HM_HEADER_LENGTH + DTLS1_RT_HEADER_LENGTH);
}
-
- OPENSSL_assert(mtu > 0); /* should have something reasonable now */
-
#endif
+ OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu()); /* should have something reasonable now */
+
if ( s->init_off == 0 && type == SSL3_RT_HANDSHAKE)
OPENSSL_assert(s->init_num ==
(int)s->d1->w_msg_hdr.msg_len + DTLS1_HM_HEADER_LENGTH);
memset(msg_hdr, 0x00, sizeof(struct hm_header_st));
- s->d1->handshake_read_seq++;
- /* we just read a handshake message from the other side:
- * this means that we don't need to retransmit of the
- * buffered messages.
- * XDTLS: may be able clear out this
- * buffer a little sooner (i.e if an out-of-order
- * handshake message/record is received at the record
- * layer.
- * XDTLS: exception is that the server needs to
- * know that change cipher spec and finished messages
- * have been received by the client before clearing this
- * buffer. this can simply be done by waiting for the
- * first data segment, but is there a better way? */
- dtls1_clear_record_buffer(s);
+ /* Don't change sequence numbers while listening */
+ if (!s->d1->listen)
+ s->d1->handshake_read_seq++;
s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH;
return s->init_num;
*ok = 0;
return i;
}
- OPENSSL_assert(i == DTLS1_HM_HEADER_LENGTH);
+ /* Handshake fails if message header is incomplete */
+ if (i != DTLS1_HM_HEADER_LENGTH)
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL_R_UNEXPECTED_MESSAGE);
+ goto f_err;
+ }
/* parse the message fragment header */
dtls1_get_message_header(wire, &msg_hdr);
/*
* if this is a future (or stale) message it gets buffered
- * (or dropped)--no further processing at this time
+ * (or dropped)--no further processing at this time
+ * While listening, we accept seq 1 (ClientHello with cookie)
+ * although we're still expecting seq 0 (ClientHello)
*/
- if ( msg_hdr.seq != s->d1->handshake_read_seq)
+ if (msg_hdr.seq != s->d1->handshake_read_seq && !(s->d1->listen && msg_hdr.seq == 1))
return dtls1_process_out_of_seq_message(s, &msg_hdr, ok);
len = msg_hdr.msg_len;
/* XDTLS: an incorrectly formatted fragment should cause the
* handshake to fail */
- OPENSSL_assert(i == (int)frag_len);
+ if (i != (int)frag_len)
+ {
+ al=SSL3_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL3_AD_ILLEGAL_PARAMETER);
+ goto f_err;
+ }
*ok = 1;
return(dtls1_do_write(s,SSL3_RT_CHANGE_CIPHER_SPEC));
}
-static int dtls1_add_cert_to_buf(BUF_MEM *buf, unsigned long *l, X509 *x)
+unsigned long dtls1_output_cert_chain(SSL *s, CERT_PKEY *cpk)
{
- int n;
unsigned char *p;
-
- n=i2d_X509(x,NULL);
- if (!BUF_MEM_grow_clean(buf,(int)(n+(*l)+3)))
- {
- SSLerr(SSL_F_DTLS1_ADD_CERT_TO_BUF,ERR_R_BUF_LIB);
- return 0;
- }
- p=(unsigned char *)&(buf->data[*l]);
- l2n3(n,p);
- i2d_X509(x,&p);
- *l+=n+3;
-
- return 1;
- }
-unsigned long dtls1_output_cert_chain(SSL *s, X509 *x)
- {
- unsigned char *p;
- int i;
unsigned long l= 3 + DTLS1_HM_HEADER_LENGTH;
- BUF_MEM *buf;
+ BUF_MEM *buf=s->init_buf;
- /* TLSv1 sends a chain with nothing in it, instead of an alert */
- buf=s->init_buf;
- if (!BUF_MEM_grow_clean(buf,10))
- {
- SSLerr(SSL_F_DTLS1_OUTPUT_CERT_CHAIN,ERR_R_BUF_LIB);
- return(0);
- }
- if (x != NULL)
- {
- X509_STORE_CTX xs_ctx;
-
- if (!X509_STORE_CTX_init(&xs_ctx,s->ctx->cert_store,x,NULL))
- {
- SSLerr(SSL_F_DTLS1_OUTPUT_CERT_CHAIN,ERR_R_X509_LIB);
- return(0);
- }
-
- X509_verify_cert(&xs_ctx);
- /* Don't leave errors in the queue */
- ERR_clear_error();
- for (i=0; i < sk_X509_num(xs_ctx.chain); i++)
- {
- x = sk_X509_value(xs_ctx.chain, i);
-
- if (!dtls1_add_cert_to_buf(buf, &l, x))
- {
- X509_STORE_CTX_cleanup(&xs_ctx);
- return 0;
- }
- }
- X509_STORE_CTX_cleanup(&xs_ctx);
- }
- /* Thawte special :-) */
- for (i=0; i<sk_X509_num(s->ctx->extra_certs); i++)
- {
- x=sk_X509_value(s->ctx->extra_certs,i);
- if (!dtls1_add_cert_to_buf(buf, &l, x))
- return 0;
- }
+ if (!ssl_add_cert_chain(s, cpk, &l))
+ return 0;
l-= (3 + DTLS1_HM_HEADER_LENGTH);
return code;
}
- if ( ! SSL_in_init(s)) /* done, no need to send a retransmit */
+#ifndef OPENSSL_NO_HEARTBEATS
+ if (!SSL_in_init(s) && !s->tlsext_hb_pending) /* done, no need to send a retransmit */
+#else
+ if (!SSL_in_init(s)) /* done, no need to send a retransmit */
+#endif
{
BIO_set_flags(SSL_get_rbio(s), BIO_FLAGS_READ);
return code;
dtls1_set_message_header(SSL *s, unsigned char *p, unsigned char mt,
unsigned long len, unsigned long frag_off, unsigned long frag_len)
{
- if ( frag_off == 0)
+ /* Don't change sequence numbers while listening */
+ if (frag_off == 0 && !s->d1->listen)
{
s->d1->handshake_write_seq = s->d1->next_handshake_write_seq;
s->d1->next_handshake_write_seq++;
return p;
}
-static unsigned int
+unsigned int
dtls1_min_mtu(void)
{
return (g_probable_mtu[(sizeof(g_probable_mtu) /
ccs_hdr->type = *(data++);
}
+
+int dtls1_shutdown(SSL *s)
+ {
+ int ret;
+#ifndef OPENSSL_NO_SCTP
+ if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
+ !(s->shutdown & SSL_SENT_SHUTDOWN))
+ {
+ ret = BIO_dgram_sctp_wait_for_dry(SSL_get_wbio(s));
+ if (ret < 0) return -1;
+
+ if (ret == 0)
+ BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 1, NULL);
+ }
+#endif
+ ret = ssl3_shutdown(s);
+#ifndef OPENSSL_NO_SCTP
+ BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 0, NULL);
+#endif
+ return ret;
+ }
+
+#ifndef OPENSSL_NO_HEARTBEATS
+int
+dtls1_process_heartbeat(SSL *s)
+ {
+ unsigned char *p = &s->s3->rrec.data[0], *pl;
+ unsigned short hbtype;
+ unsigned int payload;
+ unsigned int padding = 16; /* Use minimum padding */
+
+ /* Read type and payload length first */
+ hbtype = *p++;
+ n2s(p, payload);
+ pl = p;
+
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, TLS1_RT_HEARTBEAT,
+ &s->s3->rrec.data[0], s->s3->rrec.length,
+ s, s->msg_callback_arg);
+
+ if (hbtype == TLS1_HB_REQUEST)
+ {
+ unsigned char *buffer, *bp;
+ int r;
+
+ /* Allocate memory for the response, size is 1 byte
+ * message type, plus 2 bytes payload length, plus
+ * payload, plus padding
+ */
+ buffer = OPENSSL_malloc(1 + 2 + payload + padding);
+ bp = buffer;
+
+ /* Enter response type, length and copy payload */
+ *bp++ = TLS1_HB_RESPONSE;
+ s2n(payload, bp);
+ memcpy(bp, pl, payload);
+ bp += payload;
+ /* Random padding */
+ RAND_pseudo_bytes(bp, padding);
+
+ r = dtls1_write_bytes(s, TLS1_RT_HEARTBEAT, buffer, 3 + payload + padding);
+
+ if (r >= 0 && s->msg_callback)
+ s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT,
+ buffer, 3 + payload + padding,
+ s, s->msg_callback_arg);
+
+ OPENSSL_free(buffer);
+
+ if (r < 0)
+ return r;
+ }
+ else if (hbtype == TLS1_HB_RESPONSE)
+ {
+ unsigned int seq;
+
+ /* We only send sequence numbers (2 bytes unsigned int),
+ * and 16 random bytes, so we just try to read the
+ * sequence number */
+ n2s(pl, seq);
+
+ if (payload == 18 && seq == s->tlsext_hb_seq)
+ {
+ dtls1_stop_timer(s);
+ s->tlsext_hb_seq++;
+ s->tlsext_hb_pending = 0;
+ }
+ }
+
+ return 0;
+ }
+
+int
+dtls1_heartbeat(SSL *s)
+ {
+ unsigned char *buf, *p;
+ int ret;
+ unsigned int payload = 18; /* Sequence number + random bytes */
+ unsigned int padding = 16; /* Use minimum padding */
+
+ /* Only send if peer supports and accepts HB requests... */
+ if (!(s->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED) ||
+ s->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS)
+ {
+ SSLerr(SSL_F_DTLS1_HEARTBEAT,SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT);
+ return -1;
+ }
+
+ /* ...and there is none in flight yet... */
+ if (s->tlsext_hb_pending)
+ {
+ SSLerr(SSL_F_DTLS1_HEARTBEAT,SSL_R_TLS_HEARTBEAT_PENDING);
+ return -1;
+ }
+
+ /* ...and no handshake in progress. */
+ if (SSL_in_init(s) || s->in_handshake)
+ {
+ SSLerr(SSL_F_DTLS1_HEARTBEAT,SSL_R_UNEXPECTED_MESSAGE);
+ return -1;
+ }
+
+ /* Check if padding is too long, payload and padding
+ * must not exceed 2^14 - 3 = 16381 bytes in total.
+ */
+ OPENSSL_assert(payload + padding <= 16381);
+
+ /* Create HeartBeat message, we just use a sequence number
+ * as payload to distuingish different messages and add
+ * some random stuff.
+ * - Message Type, 1 byte
+ * - Payload Length, 2 bytes (unsigned int)
+ * - Payload, the sequence number (2 bytes uint)
+ * - Payload, random bytes (16 bytes uint)
+ * - Padding
+ */
+ buf = OPENSSL_malloc(1 + 2 + payload + padding);
+ p = buf;
+ /* Message Type */
+ *p++ = TLS1_HB_REQUEST;
+ /* Payload length (18 bytes here) */
+ s2n(payload, p);
+ /* Sequence number */
+ s2n(s->tlsext_hb_seq, p);
+ /* 16 random bytes */
+ RAND_pseudo_bytes(p, 16);
+ p += 16;
+ /* Random padding */
+ RAND_pseudo_bytes(p, padding);
+
+ ret = dtls1_write_bytes(s, TLS1_RT_HEARTBEAT, buf, 3 + payload + padding);
+ if (ret >= 0)
+ {
+ if (s->msg_callback)
+ s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT,
+ buf, 3 + payload + padding,
+ s, s->msg_callback_arg);
+
+ dtls1_start_timer(s);
+ s->tlsext_hb_pending = 1;
+ }
+
+ OPENSSL_free(buf);
+
+ return ret;
+ }
+#endif