kbuild: fixdep: Resync this with v4.17

[oweals/u-boot.git] / scripts / Makefile.spl

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 54b160d72bbd95106e4d32fe7ed253a521527225..314b02ba07dbee88e71aa9eeb352e9f6f5f70e30 100644 (file)
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -71,7 +71,11 @@ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makef
 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
 libs-y += common/init/
 
 # Special handling for a few options which support SPL/TPL
@@ -88,6 +92,7 @@ endif
 
 libs-y += drivers/
 libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
 libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
@@ -179,10 +184,10 @@ MKIMAGEFLAGS_boot.bin = -T atmelimage
 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
 MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
 
-boot.bin: $(obj)/../tools/atmel_pmecc_params
+$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
 endif
 
-boot.bin: $(obj)/u-boot-spl.bin FORCE
+$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
 else
 ifdef CONFIG_ARCH_ZYNQ
@@ -225,10 +230,16 @@ endif
 endif
 
 ifeq ($(CONFIG_SYS_SOC),"at91")
-ALL-y  += boot.bin
+ALL-y  += $(obj)/boot.bin
 endif
 
-ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
+ifdef CONFIG_TPL_BUILD
+ALL-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
+       $(obj)/u-boot-x86-reset16-tpl.bin
+else
+ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
+       $(obj)/u-boot-x86-reset16-spl.bin
+endif
 
 ALL-$(CONFIG_ARCH_ZYNQ)                += $(obj)/boot.bin
 ALL-$(CONFIG_ARCH_ZYNQMP)      += $(obj)/boot.bin
@@ -253,8 +264,20 @@ else
 FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
 endif
 
+# Build the .dtb file if:
+#   - we are not using OF_PLATDATA
+#   - we are using OF_CONTROL
+#   - we have either OF_SEPARATE or OF_HOSTFILE
+build_dtb :=
+ifeq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA),)
+ifneq ($(CONFIG_$(SPL_TPL_)OF_CONTROL),)
+ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
+build_dtb := y
+endif
+endif
+endif
 
-ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy)
+ifneq ($(build_dtb),)
 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
                $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
                $(FINAL_DTB_CONTAINER)  FORCE
@@ -316,13 +339,25 @@ quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
 OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
-               $(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)
+               $(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 $(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
        $(call if_changed,objcopy)
 
-OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
-$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
+OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
+       $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
+       $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
+       $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
        $(call if_changed,objcopy)
 
 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)