*
* Licensed under GPLv2, see file LICENSE in this source tree.
*/
+//config:config POWERTOP
+//config: bool "powertop (9.1 kb)"
+//config: default y
+//config: help
+//config: Analyze power consumption on Intel-based laptops
+//config:
+//config:config FEATURE_POWERTOP_INTERACTIVE
+//config: bool "Accept keyboard commands"
+//config: default y
+//config: depends on POWERTOP
+//config: help
+//config: Without this, powertop will only refresh display every 10 seconds.
+//config: No keyboard commands will work, only ^C to terminate.
//applet:IF_POWERTOP(APPLET(powertop, BB_DIR_USR_SBIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_POWERTOP) += powertop.o
-//config:config POWERTOP
-//config: bool "powertop"
-//config: default y
-//config: help
-//config: Analyze power consumption on Intel-based laptops
-
// XXX This should be configurable
#define ENABLE_FEATURE_POWERTOP_PROCIRQ 1
/* Max filename length of entry in /sys/devices subsystem */
#define BIG_SYSNAME_LEN 16
+#define ESC "\033"
+
typedef unsigned long long ullong;
struct line {
ullong last_usage[MAX_CSTATE_COUNT];
ullong start_duration[MAX_CSTATE_COUNT];
ullong last_duration[MAX_CSTATE_COUNT];
-#if ENABLE_FEATURE_USE_TERMIOS
+#if ENABLE_FEATURE_POWERTOP_INTERACTIVE
struct termios init_settings;
#endif
};
SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
} while (0)
-#if ENABLE_FEATURE_USE_TERMIOS
+#if ENABLE_FEATURE_POWERTOP_INTERACTIVE
static void reset_term(void)
{
tcsetattr_stdin_TCSANOW(&G.init_settings);
}
name = p;
- strchrnul(name, '\n')[0] = '\0';
+ chomp(p);
/* Save description of the interrupt */
if (nr >= 20000)
sprintf(irq_desc, " <kernel IPI> : %s", name);
// func = "Load balancing tick";
//}
- if (strncmp(func, "tick_nohz_", 10) == 0)
+ if (is_prefixed_with(func, "tick_nohz_"))
continue;
- if (strncmp(func, "tick_setup_sched_timer", 20) == 0)
+ if (is_prefixed_with(func, "tick_setup_sched_timer"))
continue;
//if (strcmp(process, "powertop") == 0)
// continue;
process = idx < 2 ? "[kernel module]" : "<kernel core>";
}
- strchrnul(p, '\n')[0] = '\0';
+ chomp(p);
// 46D\01136\0kondemand/1\0do_dbs_timer (delayed_work_timer_fn)
// ^ ^ ^
* Get information about CPU using CPUID opcode.
*/
static void cpuid(unsigned int *eax, unsigned int *ebx, unsigned int *ecx,
- unsigned int *edx)
+ unsigned int *edx)
{
/* EAX value specifies what information to return */
__asm__(
if (!edx || !(ecx & 1))
return;
- printf("Your CPU supports the following C-states: ");
+ printf("Your %s the following C-states: ", "CPU supports");
i = 0;
while (edx) {
if (edx & 7)
bb_putchar('\n');
/* Print BIOS C-States */
- printf("Your BIOS reports the following C-states: ");
+ printf("Your %s the following C-states: ", "BIOS reports");
for (i = 0; i < ARRAY_SIZE(bios_table); i++)
if (bios_table[i])
printf("C%u ", i);
int i, n = 0;
char strbuf6[6];
- strbuf6[5] = '\0';
puts("\nTop causes for wakeups:");
for (i = 0; i < G.lines_cnt; i++) {
if ((G.lines[i].count > 0 /*|| G.lines[i].disk_count > 0*/)
/*char c = ' ';
if (G.lines[i].disk_count)
c = 'D';*/
- smart_ulltoa5(G.lines[i].count, strbuf6, " KMGTPEZY");
+ smart_ulltoa5(G.lines[i].count, strbuf6, " KMGTPEZY")[0] = '\0';
printf(/*" %5.1f%% (%s)%c %s\n"*/
" %5.1f%% (%s) %s\n",
G.lines[i].count * 100.0 / G.lines_cumulative_count,
} else {
bb_putchar('\n');
bb_error_msg("no stats available; run as root or"
- " enable the cpufreq_stats module");
+ " enable the timer_stats module");
}
}
//usage:#define powertop_trivial_usage
//usage: ""
//usage:#define powertop_full_usage "\n\n"
-//usage: "Analyze power consumption on Intel-based laptops\n"
+//usage: "Analyze power consumption on Intel-based laptops"
int powertop_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int powertop_main(int UNUSED_PARAM argc, char UNUSED_PARAM **argv)
+int powertop_main(int argc UNUSED_PARAM, char UNUSED_PARAM **argv)
{
ullong cur_usage[MAX_CSTATE_COUNT];
ullong cur_duration[MAX_CSTATE_COUNT];
char cstate_lines[MAX_CSTATE_COUNT + 2][64];
-#if ENABLE_FEATURE_USE_TERMIOS
- struct termios new_settings;
+#if ENABLE_FEATURE_POWERTOP_INTERACTIVE
struct pollfd pfd[1];
pfd[0].fd = 0;
/* Get number of CPUs */
G.total_cpus = get_cpu_count();
- printf("Collecting data for "DEFAULT_SLEEP_STR" seconds\n");
+ puts("Collecting data for "DEFAULT_SLEEP_STR" seconds");
-#if ENABLE_FEATURE_USE_TERMIOS
- tcgetattr(0, (void *)&G.init_settings);
- memcpy(&new_settings, &G.init_settings, sizeof(new_settings));
- /* Turn on unbuffered input, turn off echoing */
- new_settings.c_lflag &= ~(ISIG | ICANON | ECHO | ECHONL);
- /* So we don't forget to reset term settings */
- atexit(reset_term);
+#if ENABLE_FEATURE_POWERTOP_INTERACTIVE
+ /* Turn on unbuffered input; turn off echoing, ^C ^Z etc */
+ set_termios_to_raw(STDIN_FILENO, &G.init_settings, TERMIOS_CLEAR_ISIG);
bb_signals(BB_FATAL_SIGS, sig_handler);
- tcsetattr_stdin_TCSANOW(&new_settings);
+ /* So we don't forget to reset term settings */
+ die_func = reset_term;
#endif
/* Collect initial data */
int i;
G.cant_enable_timer_stats |= start_timer(); /* 1 on error */
-#if !ENABLE_FEATURE_USE_TERMIOS
+#if !ENABLE_FEATURE_POWERTOP_INTERACTIVE
sleep(DEFAULT_SLEEP);
#else
if (safe_poll(pfd, 1, DEFAULT_SLEEP * 1000) > 0) {
}
}
- /* Clear the screen */
- printf("\033[H\033[J");
+ /* Home; clear screen */
+ printf(ESC"[H" ESC"[J");
/* Clear C-state lines */
memset(&cstate_lines, 0, sizeof(cstate_lines));
} /* for (;;) */
bb_putchar('\n');
+#if ENABLE_FEATURE_POWERTOP_INTERACTIVE
+ reset_term();
+#endif
return EXIT_SUCCESS;
}