* The code is based on the linux-mtd examples.
*/
+#define _GNU_SOURCE
+#include <byteswap.h>
#include <limits.h>
#include <unistd.h>
#include <stdlib.h>
#define MAX_ARGS 8
#define JFFS2_DEFAULT_DIR "" /* directory name without /, empty means root dir */
+#define TRX_MAGIC 0x48445230 /* "HDR0" */
+#define SEAMA_MAGIC 0x5ea3a417
+
+#if !defined(__BYTE_ORDER)
+#error "Unknown byte order"
+#endif
+
+#if __BYTE_ORDER == __BIG_ENDIAN
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#elif __BYTE_ORDER == __LITTLE_ENDIAN
+#define cpu_to_be32(x) bswap_32(x)
+#define be32_to_cpu(x) bswap_32(x)
+#else
+#error "Unsupported endianness"
+#endif
+
+enum mtd_image_format {
+ MTD_IMAGE_FORMAT_UNKNOWN,
+ MTD_IMAGE_FORMAT_TRX,
+ MTD_IMAGE_FORMAT_SEAMA,
+};
+
static char *buf = NULL;
static char *imagefile = NULL;
+static enum mtd_image_format imageformat = MTD_IMAGE_FORMAT_UNKNOWN;
static char *jffs2file = NULL, *jffs2dir = JFFS2_DEFAULT_DIR;
static int buflen = 0;
int quiet;
return 0;
}
-
static int
image_check(int imagefd, const char *mtd)
{
+ uint32_t magic;
int ret = 1;
- if (trx_check) {
- ret = trx_check(imagefd, mtd, buf, &buflen);
+
+ if (buflen < sizeof(magic)) {
+ buflen += read(imagefd, buf + buflen, sizeof(magic) - buflen);
+ if (buflen < sizeof(magic)) {
+ fprintf(stdout, "Could not get image magic\n");
+ return 0;
+ }
+ }
+ magic = ((uint32_t *)buf)[0];
+
+ if (be32_to_cpu(magic) == TRX_MAGIC)
+ imageformat = MTD_IMAGE_FORMAT_TRX;
+ else if (be32_to_cpu(magic) == SEAMA_MAGIC)
+ imageformat = MTD_IMAGE_FORMAT_SEAMA;
+
+ switch (imageformat) {
+ case MTD_IMAGE_FORMAT_TRX:
+ if (trx_check)
+ ret = trx_check(imagefd, mtd, buf, &buflen);
+ break;
+ case MTD_IMAGE_FORMAT_SEAMA:
+ break;
+ default:
+#ifdef target_brcm
+ if (!strcmp(mtd, "firmware"))
+ ret = 0;
+#endif
+ break;
}
return ret;
}
+static int
+mtd_dump(const char *mtd, int part_offset, int size)
+{
+ int ret = 0, offset = 0;
+ int fd;
+ char *buf;
+
+ if (quiet < 2)
+ fprintf(stderr, "Dumping %s ...\n", mtd);
+
+ fd = mtd_check_open(mtd);
+ if(fd < 0) {
+ fprintf(stderr, "Could not open mtd device: %s\n", mtd);
+ return -1;
+ }
+
+ if (!size)
+ size = mtdsize;
+
+ if (part_offset)
+ lseek(fd, part_offset, SEEK_SET);
+
+ buf = malloc(erasesize);
+ if (!buf)
+ return -1;
+
+ do {
+ int len = (size > erasesize) ? (erasesize) : (size);
+ int rlen = read(fd, buf, len);
+
+ if (rlen < 0) {
+ if (errno == EINTR)
+ continue;
+ ret = -1;
+ goto out;
+ }
+ if (!rlen || rlen != len)
+ break;
+ if (mtd_block_is_bad(fd, offset)) {
+ fprintf(stderr, "skipping bad block at 0x%08x\n", offset);
+ } else {
+ size -= rlen;
+ write(1, buf, rlen);
+ }
+ offset += rlen;
+ } while (size > 0);
+
+out:
+ close(fd);
+ return ret;
+}
+
static int
mtd_verify(const char *mtd, char *file)
{
if (quiet < 2)
fprintf(stderr, "Verifying %s against %s ...\n", mtd, file);
- if (stat(file, &s) || md5sum(file, f_md5)) {
+ if (stat(file, &s) || md5sum(file, f_md5) < 0) {
fprintf(stderr, "Failed to hash %s\n", file);
return -1;
}
if (mtd_block_is_bad(fd, e)) {
if (!quiet)
- fprintf(stderr, "\nSkipping bad block at 0x%08x ", e);
+ fprintf(stderr, "\nSkipping bad block at 0x%08zx ", e);
skip_bad_blocks += erasesize;
e += erasesize;
if (!quiet)
fprintf(stderr, "\b\b\b\b ");
-done:
if (quiet < 2)
fprintf(stderr, "\n");
" verify <imagefile>|- verify <imagefile> (use - for stdin) to device\n"
" write <imagefile>|- write <imagefile> (use - for stdin) to device\n"
" jffs2write <file> append <file> to the jffs2 partition on the device\n");
+ if (mtd_resetbc) {
+ fprintf(stderr,
+ " resetbc <device> reset the uboot boot counter\n");
+ }
if (mtd_fixtrx) {
fprintf(stderr,
" fixtrx fix the checksum in a trx header on first boot\n");
fprintf(stderr,
" fixseama fix the checksum in a seama header on first boot\n");
}
- fprintf(stderr,
+ fprintf(stderr,
"Following options are available:\n"
" -q quiet mode (once: no [w] on writing,\n"
" twice: no status messages)\n"
" -d <name> directory for jffs2write, defaults to \"tmp\"\n"
" -j <name> integrate <file> into jffs2 data when writing an image\n"
" -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to \"0\"\n"
- " -p write beginning at partition offset\n");
+ " -p write beginning at partition offset\n"
+ " -l <length> the length of data that we want to dump\n");
if (mtd_fixtrx) {
fprintf(stderr,
" -o offset offset of the image header in the partition(for fixtrx)\n");
- }
+ }
fprintf(stderr,
#ifdef FIS_SUPPORT
" -F <part>[:<size>[:<entrypoint>]][,<part>...]\n"
int ch, i, boot, imagefd = 0, force, unlocked;
char *erase[MAX_ARGS], *device = NULL;
char *fis_layout = NULL;
- size_t offset = 0, part_offset = 0;
+ size_t offset = 0, part_offset = 0, dump_len = 0;
enum {
CMD_ERASE,
CMD_WRITE,
CMD_FIXTRX,
CMD_FIXSEAMA,
CMD_VERIFY,
+ CMD_DUMP,
+ CMD_RESETBC,
} cmd = -1;
erase[0] = NULL;
#ifdef FIS_SUPPORT
"F:"
#endif
- "frnqe:d:s:j:p:o:")) != -1)
+ "frnqe:d:s:j:p:o:l:")) != -1)
switch (ch) {
case 'f':
force = 1;
usage();
}
break;
- case 'o':
- if (!mtd_fixtrx) {
- fprintf(stderr, "-o: is not available on this platform\n");
+ case 'l':
+ errno = 0;
+ dump_len = strtoul(optarg, 0, 0);
+ if (errno) {
+ fprintf(stderr, "-l: illegal numeric string\n");
usage();
}
+ break;
+ case 'o':
errno = 0;
offset = strtoul(optarg, 0, 0);
if (errno) {
} else if ((strcmp(argv[0], "erase") == 0) && (argc == 2)) {
cmd = CMD_ERASE;
device = argv[1];
+ } else if (((strcmp(argv[0], "resetbc") == 0) && (argc == 2)) && mtd_resetbc) {
+ cmd = CMD_RESETBC;
+ device = argv[1];
} else if (((strcmp(argv[0], "fixtrx") == 0) && (argc == 2)) && mtd_fixtrx) {
cmd = CMD_FIXTRX;
device = argv[1];
cmd = CMD_VERIFY;
imagefile = argv[1];
device = argv[2];
+ } else if ((strcmp(argv[0], "dump") == 0) && (argc == 2)) {
+ cmd = CMD_DUMP;
+ device = argv[1];
} else if ((strcmp(argv[0], "write") == 0) && (argc == 3)) {
cmd = CMD_WRITE;
device = argv[2];
case CMD_VERIFY:
mtd_verify(device, imagefile);
break;
+ case CMD_DUMP:
+ mtd_dump(device, offset, dump_len);
+ break;
case CMD_ERASE:
if (!unlocked)
mtd_unlock(device);
case CMD_FIXTRX:
if (mtd_fixtrx) {
mtd_fixtrx(device, offset);
+ }
+ case CMD_RESETBC:
+ if (mtd_resetbc) {
+ mtd_resetbc(device);
}
case CMD_FIXSEAMA:
if (mtd_fixseama)