-hostapd_add_rate() {
+. /lib/functions/network.sh
+
+wpa_supplicant_add_rate() {
local var="$1"
local val="$(($2 / 1000))"
local sub="$((($2 / 100) % 10))"
[ $sub -gt 0 ] && append $var "."
}
-hostapd_add_basic_rate() {
+hostapd_add_rate() {
local var="$1"
local val="$(($2 / 100))"
append $var "$val" " "
hostapd_common_add_device_config() {
config_add_array basic_rate
+ config_add_array supported_rates
config_add_string country
- config_add_boolean country_ie
+ config_add_boolean country_ie doth
+ config_add_string require_mode
hostapd_add_log_config
}
local base="${config%%.conf}"
local base_cfg=
- json_get_vars country country_ie beacon_int
+ json_get_vars country country_ie beacon_int doth require_mode
hostapd_set_log_options base_cfg
set_default country_ie 1
+ set_default doth 1
+
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
+
[ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
+ [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
}
[ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
local brlist= br
json_get_values basic_rate_list basic_rate
for br in $basic_rate_list; do
- hostapd_add_basic_rate brlist "$br"
+ hostapd_add_rate brlist "$br"
+ done
+ case "$require_mode" in
+ g) brlist="60 120 240" ;;
+ n) append base_cfg "require_ht=1" "$N";;
+ ac) append base_cfg "require_vht=1" "$N";;
+ esac
+
+ local rlist= r
+ json_get_values rate_list supported_rates
+ for r in $rate_list; do
+ hostapd_add_rate rlist "$r"
done
+
+ [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
[ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
hostapd_common_add_bss_config() {
config_add_string 'bssid:macaddr' 'ssid:string'
- config_add_boolean wds wmm hidden
+ config_add_boolean wds wmm uapsd hidden
config_add_int maxassoc max_inactivity
config_add_boolean disassoc_low_ack isolate short_preamble
config_add_boolean rsn_preauth auth_cache
config_add_int ieee80211w
+ config_add_int eapol_version
config_add_string 'auth_server:host' 'server:host'
config_add_string auth_secret
config_add_int dae_port
config_add_string nasid
+ config_add_string ownip
config_add_string iapp_interface
- config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
+ config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
+
+ config_add_int dynamic_vlan vlan_naming
+ config_add_string vlan_tagged_interface vlan_bridge
+ config_add_string vlan_file
config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
- config_add_boolean wps_pushbutton wps_label ext_registrar
+ config_add_string wpa_psk_file
+
+ config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
+ config_add_boolean ieee80211r pmk_r1_push
+ config_add_int r0_key_lifetime reassociation_deadline
+ config_add_string mobility_domain r1_key_holder
+ config_add_array r0kh r1kh
+
config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
config_add_string macfilter 'macfile:file'
config_add_array 'maclist:list(macaddr)'
+ config_add_array bssid_blacklist
+ config_add_array bssid_whitelist
+
config_add_int mcast_rate
config_add_array basic_rate
+ config_add_array supported_rates
}
hostapd_set_bss_options() {
wireless_vif_parse_encryption
local bss_conf
- local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey
+ local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
json_get_vars \
wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
- wps_pushbutton wps_label ext_registrar \
+ wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
wps_device_type wps_device_name wps_manufacturer wps_pin \
- macfilter ssid wmm hidden short_preamble
+ macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
+ iapp_interface eapol_version acct_server acct_secret acct_port
set_default isolate 0
set_default maxassoc 0
set_default disassoc_low_ack 1
set_default hidden 0
set_default wmm 1
+ set_default uapsd 1
+ set_default eapol_version 0
+ set_default acct_port 1813
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "preamble=$short_preamble" "$N"
append bss_conf "wmm_enabled=$wmm" "$N"
append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
+ append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
[ "$wpa" -gt 0 ] && {
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
}
+ [ -n "$acct_server" ] && {
+ append bss_conf "acct_server_addr=$acct_server" "$N"
+ append bss_conf "acct_server_port=$acct_port" "$N"
+ [ -n "$acct_secret" ] && \
+ append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+ }
+
case "$auth_type" in
none)
wps_possible=1
wps_not_configured=1
;;
psk)
- json_get_vars key
+ json_get_vars key wpa_psk_file
if [ ${#key} -lt 8 ]; then
wireless_setup_vif_failed INVALID_WPA_PSK
return 1
else
append bss_conf "wpa_passphrase=$key" "$N"
fi
+ [ -n "$wpa_psk_file" ] && {
+ [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
+ append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
+ }
+ [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
+
wps_possible=1
+ append wpa_key_mgmt "WPA-PSK"
;;
eap)
json_get_vars \
auth_server auth_secret auth_port \
- acct_server acct_secret acct_port \
dae_client dae_secret dae_port \
- nasid rsn_preauth iapp_interface \
- eap_reauth_period
+ ownip \
+ eap_reauth_period dynamic_vlan \
+ vlan_naming vlan_tagged_interface \
+ vlan_bridge vlan_file
# legacy compatibility
[ -n "$auth_server" ] || json_get_var auth_server server
[ -n "$auth_secret" ] || json_get_var auth_secret key
set_default auth_port 1812
- set_default acct_port 1813
set_default dae_port 3799
+ set_default vlan_naming 1
+
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
- [ -n "$acct_server" ] && {
- append bss_conf "acct_server_addr=$acct_server" "$N"
- append bss_conf "acct_server_port=$acct_port" "$N"
- [ -n "$acct_secret" ] && \
- append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
- }
-
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
[ -n "$dae_client" -a -n "$dae_secret" ] && {
append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
}
- append bss_conf "nas_identifier=$nasid" "$N"
+ [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
append bss_conf "eapol_key_index_workaround=1" "$N"
append bss_conf "ieee8021x=1" "$N"
- append bss_conf "wpa_key_mgmt=WPA-EAP" "$N"
+ append wpa_key_mgmt "WPA-EAP"
+
+ [ -n "$dynamic_vlan" ] && {
+ append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
+ append bss_conf "vlan_naming=$vlan_naming" "$N"
+ [ -n "$vlan_bridge" ] && \
+ append bss_conf "vlan_bridge=$vlan_bridge" "$N"
+ [ -n "$vlan_tagged_interface" ] && \
+ append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
+ [ -n "$vlan_file" ] && {
+ [ -e "$vlan_file" ] || touch "$vlan_file"
+ append bss_conf "vlan_file=$vlan_file" "$N"
+ }
+ }
+
+ [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
;;
wep)
local wep_keyidx=0
set_default wps_pushbutton 0
set_default wps_label 0
+ set_default wps_pbc_in_m1 0
config_methods=
[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
[ -n "$wps_possible" -a -n "$config_methods" ] && {
set_default ext_registrar 0
set_default wps_device_type "6-0050F204-1"
- set_default wps_device_name "OpenWrt AP"
- set_default wps_manufacturer "openwrt.org"
- set_default wps_pin "12345670"
+ set_default wps_device_name "Lede AP"
+ set_default wps_manufacturer "www.lede-project.org"
wps_state=2
[ -n "$wps_configured" ] && wps_state=1
- [ "$ext_registrar" -gt 0 -a -n "$bridge" ] && append bss_conf "upnp_iface=$bridge" "$N"
+ [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
append bss_conf "eap_server=1" "$N"
- append bss_conf "ap_pin=$wps_pin" "$N"
+ [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
append bss_conf "wps_state=$wps_state" "$N"
append bss_conf "ap_setup_locked=0" "$N"
append bss_conf "device_type=$wps_device_type" "$N"
append bss_conf "device_name=$wps_device_name" "$N"
append bss_conf "manufacturer=$wps_manufacturer" "$N"
append bss_conf "config_methods=$config_methods" "$N"
+ [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
}
append bss_conf "ssid=$ssid" "$N"
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
- [ -n "$iapp_interface" ] && {
- iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
- [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
+ [ -n "$iapp_interface" ] && {
+ local ifname
+ network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface"
+ append bss_conf "iapp_interface=$ifname" "$N"
}
+ if [ "$wpa" -ge "1" ]; then
+ json_get_vars nasid ieee80211r
+ set_default ieee80211r 0
+ [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
+
+ if [ "$ieee80211r" -gt "0" ]; then
+ json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
+ reassociation_deadline pmk_r1_push
+ json_get_values r0kh r0kh
+ json_get_values r1kh r1kh
+
+ set_default mobility_domain "4f57"
+ set_default r0_key_lifetime 10000
+ set_default r1_key_holder "00004f577274"
+ set_default reassociation_deadline 1000
+ set_default pmk_r1_push 0
+
+ append bss_conf "mobility_domain=$mobility_domain" "$N"
+ append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
+ append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+ append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+ append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
+
+ for kh in $r0kh; do
+ append bss_conf "r0kh=${kh//,/ }" "$N"
+ done
+ for kh in $r1kh; do
+ append bss_conf "r1kh=${kh//,/ }" "$N"
+ done
+
+ [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
+ [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
+ fi
+
+ [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
+ fi
+
if [ "$wpa" -ge "2" ]; then
- if [ -n "$bridge" -a "$rsn_preauth" = 1 ]; then
+ if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
set_default auth_cache 1
append bss_conf "rsn_preauth=1" "$N"
- append bss_conf "rsn_preauth_interfaces=$bridge" "$N"
+ append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
else
set_default auth_cache 0
fi
set_default log_iapp 1
set_default log_mlme 1
- local log_mask=$(( \
+ local log_mask=$(( \
($log_80211 << 0) | \
($log_8021x << 1) | \
($log_radius << 2) | \
wpa_supplicant_teardown_interface() {
_wpa_supplicant_common "$1"
- rm -rf "$_rpath" "$_config"
+ rm -rf "$_rpath/$1" "$_config"
}
wpa_supplicant_prepare_interface() {
_w_modestr="mode=1"
}
+ local country_str=
+ [ -n "$country" ] && {
+ country_str="country=$country"
+ }
+
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
$ap_scan
+$country_str
EOF
return 0
}
json_get_vars \
ssid bssid key \
basic_rate mcast_rate \
- ieee80211w
+ ieee80211w ieee80211r
+
+ set_default ieee80211r 0
local key_mgmt='NONE'
local enc_str=
local T=" "
local wpa_key_mgmt="WPA-PSK"
- local scan_ssid="1"
+ local scan_ssid="scan_ssid=1"
local freq
+ [ "$ieee80211r" -gt 0 ] && wpa_key_mgmt="FT-PSK $wpa_key_mgmt"
+
[[ "$_w_mode" = "adhoc" ]] && {
append network_data "mode=1" "$N$T"
[ -n "$channel" ] && {
append network_data "frequency=$freq" "$N$T"
}
- scan_ssid=0
+ scan_ssid="scan_ssid=0"
[ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
}
- [[ "$_w_mode" = adhoc ]] && append network_data "$_w_modestr" "$N$T"
+ [[ "$_w_mode" = "mesh" ]] && {
+ json_get_vars mesh_id
+ ssid="${mesh_id}"
+
+ append network_data "mode=5" "$N$T"
+ [ -n "$channel" ] && {
+ freq="$(get_freq "$phy" "$channel")"
+ append network_data "frequency=$freq" "$N$T"
+ }
+ wpa_key_mgmt="SAE"
+ scan_ssid=""
+ }
+
+ [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
case "$auth_type" in
none) ;;
;;
eap)
key_mgmt='WPA-EAP'
+ [ "$ieee80211r" -gt 0 ] && key_mgmt="FT-EAP $key_mgmt"
- json_get_vars eap_type identity ca_cert
+ json_get_vars eap_type identity anonymous_identity ca_cert
[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
+ [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
case "$eap_type" in
tls)
json_get_vars client_cert priv_key priv_key_pwd
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
;;
- peap|ttls)
- json_get_vars auth password
+ fast|peap|ttls)
+ json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
set_default auth MSCHAPV2
- append network_data "phase2=\"$auth\"" "$N$T"
- append network_data "password=\"$password\"" "$N$T"
+
+ if [ "$auth" = "EAP-TLS" ]; then
+ [ -n "$ca_cert2" ] &&
+ append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
+ append network_data "client_cert2=\"$client_cert2\"" "$N$T"
+ append network_data "private_key2=\"$priv_key2\"" "$N$T"
+ append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
+ else
+ append network_data "password=\"$password\"" "$N$T"
+ fi
+
+ phase2proto="auth="
+ case "$auth" in
+ "auth"*)
+ phase2proto=""
+ ;;
+ "EAP-"*)
+ auth="$(echo $auth | cut -b 5- )"
+ [ "$eap_type" = "ttls" ] &&
+ phase2proto="autheap="
+ ;;
+ esac
+ append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
;;
esac
append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
;;
esac
- case "$wpa" in
- 1)
- append network_data "proto=WPA" "$N$T"
- ;;
- 2)
- append network_data "proto=RSN" "$N$T"
- ;;
- esac
-
- case "$ieee80211w" in
- [012])
- [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
- ;;
- esac
+ [ "$mode" = mesh ] || {
+ case "$wpa" in
+ 1)
+ append network_data "proto=WPA" "$N$T"
+ ;;
+ 2)
+ append network_data "proto=RSN" "$N$T"
+ ;;
+ esac
+ case "$ieee80211w" in
+ [012])
+ [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
+ ;;
+ esac
+ }
local beacon_int brates mrate
[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
+ local bssid_blacklist bssid_whitelist
+ json_get_values bssid_blacklist bssid_blacklist
+ json_get_values bssid_whitelist bssid_whitelist
+
+ [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
+ [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
[ -n "$basic_rate" ] && {
local br rate_list=
for br in $basic_rate; do
- hostapd_add_rate rate_list "$br"
+ wpa_supplicant_add_rate rate_list "$br"
done
[ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
}
[ -n "$mcast_rate" ] && {
local mc_rate=
- hostapd_add_rate mc_rate "$mcast_rate"
+ wpa_supplicant_add_rate mc_rate "$mcast_rate"
append network_data "mcast_rate=$mc_rate" "$N$T"
}
local ht_str
- [ -n "$ht" ] && append network_data "htmode=$ht" "$N$T"
+ [[ "$_w_mode" = adhoc ]] || ibss_htmode=
+ [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
cat >> "$_config" <<EOF
network={
- scan_ssid=$scan_ssid
+ $scan_ssid
ssid="$ssid"
key_mgmt=$key_mgmt
$network_data
}
hostapd_common_cleanup() {
- killall hostapd wpa_supplicant
+ killall hostapd wpa_supplicant meshd-nl80211
}