ltq-vdsl-app: re-add lowlevel settings

[librecmc/librecmc.git] / package / network / config / ltq-vdsl-app / files / dsl_control

diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index 8f248238517476dc1ff5bffc886c2888f8022fff..4ddc1d7880e240b32aca93db8388329e4f5db9ae 100644 (file)
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -1,42 +1,181 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2012 OpenWrt.org
 
-START=99
+# needs to start before the atm layer which starts at 50
+START=48
+USE_PROCD=1
 
 EXTRA_COMMANDS="status lucistat"
 EXTRA_HELP="   status  Get DSL status information
        lucistat  Get status information if lua friendly format"
 
-SERVICE_DAEMONIZE=1
-SERVICE_WRITE_PID=1
+[ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
 
-. /lib/functions/lantiq_dsl.sh
-XDSL_CTRL=vdsl_cpe_control
+#
+# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
+# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
+#
+# G.992.1 Annex A
+# G.992.3 Annex A / L-US1 / L_US-2 / M
+# G.992.5 Annex A / M
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_a="04_00_04_00_4C_01_04_0F"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.5 Annex B
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_b="10_00_10_00_00_04_00_0F"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.3 Annex J
+# G.992.5 Annex B
+# G.992.5 Annex J
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_j="10_00_10_40_00_04_01_0F"
+
+#
+# ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets)
+#
+
+# A43
+tone_adsl_a="0x142" # A43C + J43 + A43
+tone_vdsl_a="0x142" # A43C + J43 + A43
+
+# A43 + V43
+tone_adsl_av="0x142" # A43C + J43 + A43
+tone_vdsl_av="0x146" # A43C + J43 + A43 + V43
+
+# B43
+tone_adsl_b="0x81" # B43 + B43c
+tone_vdsl_b="0x1" # B43
+
+# B43 + V43
+tone_adsl_bv="0x81" # B43 + B43c
+tone_vdsl_bv="0x5" # B43 + V43
+
+lowlevel_cfg() {
+       echo "# VRX Low Level Configuration File
+#
+# Parameters must be separated by tabs or spaces.
+# Empty lines and comments will be ignored.
+#
+
+# nFilter
+#
+# NA     = -1
+# OFF    = 0
+# ISDN   = 1
+# POTS   = 2
+# POTS_2 = 3
+# POTS_3 = 4
+#
+#  (dec)
+    -1
+
+# nHsToneGroupMode nHsToneGroup_A       nHsToneGroup_V    nHsToneGroup_AV
+#
+# NA     = -1      NA         = -1      see               see
+# AUTO   = 0       VDSL2_B43  = 0x0001  nHsToneGroup_A    nHsToneGroup_A
+# MANUAL = 1       VDSL2_A43  = 0x0002
+#                  VDSL2_V43  = 0x0004
+#                  VDSL1_V43P = 0x0008
+#                  VDSL1_V43I = 0x0010
+#                  ADSL1_C43  = 0x0020
+#                  ADSL2_J43  = 0x0040
+#                  ADSL2_B43C = 0x0080
+#                  ADSL2_A43C = 0x0100
+#
+#  (dec)           (hex)                (hex)             (hex)
+     1             $1                  $2               0x0
+
+#   nBaseAddr     nIrqNum
+#
+#     (hex)        (dec)
+    0x1e116000      63
+
+# nUtopiaPhyAdr   nUtopiaBusWidth      nPosPhyParity
+#                 default(16b) = 0     NA   = -1
+#                 8-bit        = 1     ODD  = 0
+#                 16-bit       = 2
+#
+#
+#    (hex)            (dec)                (dec)
+      0xFF              0                    0
+
+# bNtrEnable
+#
+#  (dec)
+    0" > /tmp/lowlevel.cfg
+}
+
+service_triggers() {
+       procd_add_reload_trigger network
+}
+
+start_service() {
+       local annex
+       local firmware
+       local tone
+       local tone_adsl
+       local tone_vdsl
+       local xtse
+       local mode
+       local lowlevel
 
-start() {
-       local firmware xtu
-       
        config_load network
-       
-       config_get firmware wan firmware
-       [ -z "${firmware}" ] &&
-               firmware=vdsl.bin
-
-       config_get xtu wan xtu
-       [ -z "${xtu}" ] &&
-               xtu=10_00_10_00_00_04_01_07
-
-       service_start /sbin/vdsl_cpe_control \
-               -i${xtu} \
-               -T4_0_1
-               -n /sbin/dsl_notify.sh \
-               -f /lib/firmware/${firmware}
+       config_get tone dsl tone
+       config_get annex dsl annex
+       config_get firmware dsl firmware
+       config_get xfer_mode dsl xfer_mode
+
+       [ -z "${xfer_mode}" ] && xfer_mode=ptm
+
+       case "${xfer_mode}" in
+       atm)
+               LOAD=ltq_atm_vr9
+               UNLOAD=ltq_ptm_vr9
+               mode=1
+               ;;
+       *)
+               LOAD=ltq_ptm_vr9
+               UNLOAD=ltq_atm_vr9
+               mode=2
+               ;;
+       esac
+
+       eval "xtse=\"\${xtse_xdsl_$annex}\""
+
+       [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
+       [ -f "${firmware}" ] || {
+               echo failed to find $firmware
+               return 1
+       }
+
+       eval "tone_adsl=\"\${tone_adsl_$tone}\""
+       eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
+       [ -n "${tone_adsl}" ] && [ -n "${tone_vdsl}" ] && {
+               lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
+               lowlevel="-l /tmp/lowlevel.cfg"
+       }
+
+       procd_open_instance
+       procd_set_param command /sbin/vdsl_cpe_control_wrapper \
+                       -i$xtse \
+                       -n /sbin/dsl_notify.sh \
+                       -f ${firmware} \
+                       $lowlevel \
+                       -M ${mode}
+       procd_append_param env "LOAD=$LOAD" "UNLOAD=$UNLOAD"
+       procd_close_instance
 }
 
-stop() {
+stop_service() {
        DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
        DSL_INTERFACE_STATUS="DOWN" \
                /sbin/dsl_notify.sh
-
-       service_stop /sbin/vdsl_cpe_control
 }