m = Map("unbound", translate("Recursive DNS"),
translate("Unbound is a validating, recursive, and caching DNS resolver."))
+
+s = m:section(TypedSection, "unbound", translate("Unbound Settings"))
+s.addremove = false
+s.anonymous = true
-s1 = m:section(TypedSection, "unbound")
-s1.addremove = false
-s1.anonymous = true
-s1:tab("service", translate("Basic Settings"))
-s1:tab("advanced", translate("Advanced Settings"))
-s1:tab("resource", translate("Resource Settings"))
+s:tab("service", translate("Unbound Service"))
+s:tab("resource", translate("Unbound Resources"))
+s:tab("dnsmasq", translate("Dnsmasq Link"))
---LuCI or Not
+--Enable Unbound
-ena = s1:taboption("service", Flag, "enabled", translate("Enable Unbound:"),
+e = s:taboption("service", Flag, "enabled", translate("Enable Unbound:"),
translate("Enable the initialization scripts for Unbound"))
-ena.rmempty = false
+e.rmempty = false
-mcf = s1:taboption("service", Flag, "manual_conf", translate("Manual Conf:"),
- translate("Skip UCI and use /etc/unbound/unbound.conf"))
-mcf.rmempty = false
-
-function ena.cfgvalue(self, section)
+function e.cfgvalue(self, section)
return luci.sys.init.enabled("unbound") and self.enabled or self.disabled
end
-function ena.write(self, section, value)
+function e.write(self, section, value)
if value == "1" then
luci.sys.init.enable("unbound")
luci.sys.call("/etc/init.d/unbound start >/dev/null")
return Flag.write(self, section, value)
end
---Basic Tab
+--Service Tab
+
+mcf = s:taboption("service", Flag, "manual_conf", translate("Manual Conf:"),
+ translate("Skip UCI and use /etc/unbound/unbound.conf"))
+mcf.rmempty = false
-lsv = s1:taboption("service", Flag, "localservice", translate("Local Service:"),
+lsv = s:taboption("service", Flag, "localservice", translate("Local Service:"),
translate("Accept queries only from local subnets"))
lsv.rmempty = false
-rlh = s1:taboption("service", Flag, "rebind_localhost", translate("Block Localhost Rebind:"),
+qry = s:taboption("service", Flag, "query_minimize", translate("Query Minimize:"),
+ translate("Break down query components for small added privacy"))
+qry.rmempty = false
+
+rlh = s:taboption("service", Flag, "rebind_localhost", translate("Block Localhost Rebind:"),
translate("Prevent upstream response of 127.0.0.0/8"))
rlh.rmempty = false
-rpv = s1:taboption("service", Flag, "rebind_protection", translate("Block Private Rebind:"),
+rpv = s:taboption("service", Flag, "rebind_protection", translate("Block Private Rebind:"),
translate("Prevent upstream response of RFC1918 ranges"))
rpv.rmempty = false
-vld = s1:taboption("service", Flag, "validator", translate("Enable DNSSEC:"),
+vld = s:taboption("service", Flag, "validator", translate("Enable DNSSEC:"),
translate("Enable the DNSSEC validator module"))
vld.rmempty = false
-nvd = s1:taboption("service", Flag, "validator_ntp", translate("DNSSEC NTP Fix:"),
+nvd = s:taboption("service", Flag, "validator_ntp", translate("DNSSEC NTP Fix:"),
translate("Break the loop where DNSSEC needs NTP and NTP needs DNS"))
nvd.rmempty = false
-nvd:depends({ validator = true })
-eds = s1:taboption("service", Value, "edns_size", translate("EDNS Size:"),
+eds = s:taboption("service", Value, "edns_size", translate("EDNS Size:"),
translate("Limit extended DNS packet size"))
eds.datatype = "and(uinteger,min(512),max(4096))"
eds.rmempty = false
-prt = s1:taboption("service", Value, "listen_port", translate("Listening Port:"),
+prt = s:taboption("service", Value, "listen_port", translate("Listening Port:"),
translate("Choose Unbounds listening port"))
prt.datatype = "port"
prt.rmempty = false
-tlm = s1:taboption("service", Value, "ttl_min", translate("TTL Minimum:"),
+tlm = s:taboption("service", Value, "ttl_min", translate("TTL Minimum:"),
translate("Prevent excessively short cache periods"))
tlm.datatype = "and(uinteger,min(0),max(600))"
tlm.rmempty = false
---Advanced Tab
-
-ctl = s1:taboption("advanced", Flag, "unbound_control", translate("Unbound Control App:"),
- translate("Enable unecrypted localhost access for unbound-control"))
-ctl.rmempty = false
-
-dlk = s1:taboption("advanced", ListValue, "dhcp_link", translate("DHCP Link:"),
- translate("Link to supported programs to load DHCP into DNS"))
-dlk:value("none", translate("No Link"))
-dlk:value("dnsmasq", "dnsmasq")
-dlk:value("odhcpd", "odhcpd")
-dlk.rmempty = false
-
-dom = s1:taboption("advanced", Value, "domain", translate("Local Domain:"),
- translate("Domain suffix for this router and DHCP clients"))
-dom.placeholder = "lan"
-dom:depends({ dhcp_link = "none" })
-dom:depends({ dhcp_link = "odhcpd" })
-
-dty = s1:taboption("advanced", ListValue, "domain_type", translate("Local Domain Type:"),
- translate("How to treat queries of this local domain"))
-dty:value("deny", translate("Ignored"))
-dty:value("refuse", translate("Refused"))
-dty:value("static", translate("Only Local"))
-dty:value("transparent", translate("Also Forwarded"))
-dty:depends({ dhcp_link = "none" })
-dty:depends({ dhcp_link = "odhcpd" })
-
-lfq = s1:taboption("advanced", ListValue, "add_local_fqdn", translate("LAN DNS:"),
- translate("How to enter the LAN or local network router in DNS"))
-lfq:value("0", translate("No DNS"))
-lfq:value("1", translate("Hostname, Primary Address"))
-lfq:value("2", translate("Hostname, All Addresses"))
-lfq:value("3", translate("Host FQDN, All Addresses"))
-lfq:value("4", translate("Interface FQDN, All Addresses"))
-lfq:depends({ dhcp_link = "none" })
-lfq:depends({ dhcp_link = "odhcpd" })
-
-wfq = s1:taboption("advanced", ListValue, "add_wan_fqdn", translate("WAN DNS:"),
- translate("Override the WAN side router entry in DNS"))
-wfq:value("0", translate("Upstream"))
-wfq:value("1", translate("Hostname, Primary Address"))
-wfq:value("2", translate("Hostname, All Addresses"))
-wfq:value("3", translate("Host FQDN, All Addresses"))
-wfq:value("4", translate("Interface FQDN, All Addresses"))
-wfq:depends({ dhcp_link = "none" })
-wfq:depends({ dhcp_link = "odhcpd" })
-
-ctl = s1:taboption("advanced", Flag, "dhcp4_slaac6", translate("DHCPv4 to SLAAC:"),
- translate("Use DHCPv4 MAC to discover IP6 hosts SLAAC (EUI64)"))
-ctl.rmempty = false
-
-d64 = s1:taboption("advanced", Flag, "dns64", translate("Enable DNS64:"),
+d64 = s:taboption("service", Flag, "dns64", translate("Enable DNS64:"),
translate("Enable the DNS64 module"))
d64.rmempty = false
-pfx = s1:taboption("advanced", Value, "dns64_prefix", translate("DNS64 Prefix:"),
+pfx = s:taboption("service", Value, "dns64_prefix", translate("DNS64 Prefix:"),
translate("Prefix for generated DNS64 addresses"))
pfx.datatype = "ip6addr"
pfx.placeholder = "64:ff9b::/96"
pfx.optional = true
-pfx:depends({ dns64 = true })
-
-qry = s1:taboption("advanced", Flag, "query_minimize", translate("Query Minimize:"),
- translate("Break down query components for limited added privacy"))
-qry.rmempty = false
-
-qrs = s1:taboption("advanced", Flag, "query_min_strict", translate("Strict Minimize:"),
- translate("Strict version of 'query minimize' but it can break DNS"))
-qrs.rmempty = false
-qrs:depends({ query_minimize = true })
-
---TODO: dnsmasq needs to not reference resolve-file and get off port 53.
+pfx:depends({ dns64 = "1" })
--Resource Tuning Tab
-pro = s1:taboption("resource", ListValue, "protocol", translate("Recursion Protocol:"),
- translate("Chose the protocol recursion queries leave on"))
-pro:value("mixed", translate("IP4 and IP6"))
-pro:value("ip6_prefer", translate("IP6 Preferred"))
-pro:value("ip4_only", translate("IP4 Only"))
-pro:value("ip6_only", translate("IP6 Only"))
-pro.rmempty = false
-
-rsn = s1:taboption("resource", ListValue, "recursion", translate("Recursion Strength:"),
+rsn = s:taboption("resource", ListValue, "recursion", translate("Recursion Strength:"),
translate("Recursion activity affects memory growth and CPU load"))
rsn:value("aggressive", translate("Aggressive"))
rsn:value("default", translate("Default"))
rsn:value("passive", translate("Passive"))
rsn.rmempty = false
-rsc = s1:taboption("resource", ListValue, "resource", translate("Memory Resource:"),
+rsc = s:taboption("resource", ListValue, "resource", translate("Memory Resource:"),
translate("Use menu System/Processes to observe any memory growth"))
rsc:value("large", translate("Large"))
rsc:value("medium", translate("Medium"))
rsc:value("tiny", translate("Tiny"))
rsc.rmempty = false
-ag2 = s1:taboption("resource", Value, "root_age", translate("Root DSKEY Age:"),
+age = s:taboption("resource", Value, "root_age", translate("Root DSKEY Age:"),
translate("Limit days between RFC5011 to reduce flash writes"))
-ag2.datatype = "and(uinteger,min(1),max(99))"
-ag2:value("14", "14")
-ag2:value("28", "28 ("..translate("default")..")")
-ag2:value("45", "45")
-ag2:value("90", "90")
-ag2:value("99", "99 ("..translate("never")..")")
+age.datatype = "and(uinteger,min(1),max(99))"
+age:value("14", "14")
+age:value("28", "28 ("..translate("default")..")")
+age:value("45", "45")
+age:value("90", "90")
+age:value("99", "99 ("..translate("never")..")")
+
+--Dnsmasq Link Tab
+
+dld = s:taboption("dnsmasq", Flag, "dnsmasq_link_dns", translate("Link dnsmasq:"),
+ translate("Forward queries to dnsmasq for local clients"))
+dld.rmempty = false
+
+dgn = s:taboption("dnsmasq", Flag, "dnsmsaq_gate_name", translate("Local Gateway Name:"),
+ translate("Also query dnsmasq for this hosts outbound gateway"))
+dgn.rmempty = false
+
+--TODO: Read only repective dnsmasq options and inform user of link requirements.
+--TODO: dnsmasq needs to not reference resolve-file and get off port 53.
return m
projects / librecmc / librecmc.git / blobdiff