#
-# Copyright (C) 2006-2011 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
CONFIG_BLUEZ_HCIUSB \
CONFIG_BLUEZ_HIDP \
CONFIG_BT \
- CONFIG_BT_L2CAP \
- CONFIG_BT_SCO \
+ CONFIG_BT_L2CAP=y \
+ CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
- ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.39)),1)
- AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
- else
- FILES+= \
- $(LINUX_DIR)/net/bluetooth/l2cap.ko \
- $(LINUX_DIR)/net/bluetooth/sco.ko
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
- endif
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
define KernelPackage/bluetooth/description
$(eval $(call KernelPackage,bluetooth-hci-h4p))
-define KernelPackage/cpu-msr
- SUBMENU:=$(OTHER_MENU)
- TITLE:=x86 CPU MSR support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_X86_MSR
- FILES:=$(LINUX_DIR)/arch/x86/kernel/msr.ko
- AUTOLOAD:=$(call AutoLoad,20,msr)
-endef
-
-define KernelPackage/cpu-msr/description
- Kernel module for Model Specific Registers support in x86 CPUs
-endef
-
-$(eval $(call KernelPackage,cpu-msr))
-
-
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
$(eval $(call KernelPackage,eeprom-93cx6))
-define KernelPackage/gpio-cs5535
+define KernelPackage/eeprom-at24
SUBMENU:=$(OTHER_MENU)
- TITLE:=AMD CS5535/CS5536 GPIO driver
- DEPENDS:=@TARGET_x86 @LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_35||LINUX_2_6_36||LINUX_2_6_37
- KCONFIG:=CONFIG_CS5535_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.ko
- AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
+ TITLE:=EEPROM AT24 support
+ KCONFIG:=CONFIG_EEPROM_AT24
+ DEPENDS:=+kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
+ AUTOLOAD:=$(call AutoLoad,60,at24)
endef
-define KernelPackage/gpio-cs5535/description
- This package contains the AMD CS5535/CS5536 GPIO driver
+define KernelPackage/eeprom-at24/description
+ Kernel module for most I2C EEPROMs
endef
-$(eval $(call KernelPackage,gpio-cs5535))
+$(eval $(call KernelPackage,eeprom-at24))
-define KernelPackage/gpio-cs5535-new
+define KernelPackage/eeprom-at25
SUBMENU:=$(OTHER_MENU)
- TITLE:=AMD CS5535/CS5536 GPIO driver with improved sysfs support
- DEPENDS:=@TARGET_x86 @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32)
- KCONFIG:=CONFIG_GPIO_CS5535
- FILES:=$(LINUX_DIR)/drivers/gpio/cs5535-gpio.ko
- AUTOLOAD:=$(call AutoLoad,50,cs5535-gpio)
+ TITLE:=EEPROM AT25 support
+ KCONFIG:=CONFIG_EEPROM_AT25
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
+ AUTOLOAD:=$(call AutoLoad,61,at25)
endef
-define KernelPackage/gpio-cs5535-new/description
- This package contains the new AMD CS5535/CS5536 GPIO driver
+define KernelPackage/eeprom-at25/description
+ Kernel module for most SPI EEPROMs
endef
-$(eval $(call KernelPackage,gpio-cs5535-new))
+$(eval $(call KernelPackage,eeprom-at25))
define KernelPackage/gpio-dev
$(eval $(call KernelPackage,gpio-dev))
-define KernelPackage/gpio-nsc
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi GPIO support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_NSC_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.ko
- AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
-endef
-
-define KernelPackage/gpio-nsc/description
- Kernel module for Natsemi GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-nsc))
-
-
-define KernelPackage/gpio-pc8736x
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PC8736x GPIO support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_PC8736x_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.ko
- AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
-endef
-
-define KernelPackage/gpio-pc8736x/description
- Kernel module for PC8736x GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-pc8736x))
-
-
-define KernelPackage/gpio-scx200
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 GPIO support
- DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
- KCONFIG:=CONFIG_SCx200_GPIO
- FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.ko
- AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
-endef
-
-define KernelPackage/gpio-scx200/description
- Kernel module for SCX200 GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-scx200))
-
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
define KernelPackage/hid
SUBMENU:=$(OTHER_MENU)
TITLE:=HID Devices
- DEPENDS:=+kmod-input-evdev
KCONFIG:=CONFIG_HID
FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
AUTOLOAD:=$(call AutoLoad,61,hid)
- $(call SetDepends/hid)
- $(call AddDepends/input)
+ $(call AddDepends/input,+kmod-input-evdev)
endef
define KernelPackage/hid/description
SUBMENU:=$(OTHER_MENU)
TITLE:=Input device core
KCONFIG:=CONFIG_INPUT
- $(call SetDepends/input)
FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
AUTOLOAD:=$(call AutoLoad,19,input-core)
endef
define KernelPackage/input-gpio-keys-polled
SUBMENU:=$(OTHER_MENU)
TITLE:=Polled GPIO key support
- DEPENDS:=@GPIO_SUPPORT @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_34||LINUX_2_6_35||LINUX_2_6_36) +kmod-input-polldev
+ DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
KCONFIG:= \
CONFIG_KEYBOARD_GPIO_POLLED \
CONFIG_INPUT_KEYBOARD=y
CONFIG_RFKILL \
CONFIG_RFKILL_INPUT=y \
CONFIG_RFKILL_LEDS=y
-ifeq ($(CONFIG_LINUX_2_6_30),)
FILES:= \
$(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
-else
- FILES:= \
- $(LINUX_DIR)/net/rfkill/rfkill.ko \
- $(LINUX_DIR)/net/rfkill/rfkill-input.ko
- AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
-endif
$(call SetDepends/rfkill)
endef
$(eval $(call KernelPackage,ssb))
-define KernelPackage/wdt-geode
+define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
- TITLE:=Geode/LX Watchdog timer
- DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
- KCONFIG:=CONFIG_GEODE_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
- AUTOLOAD:=$(call AutoLoad,50,geodewdt)
-endef
-
-define KernelPackage/wdt-geode/description
- Kernel module for Geode watchdog timer.
-endef
-
-$(eval $(call KernelPackage,wdt-geode))
-
-
-define KernelPackage/cs5535-clockevt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=CS5535/CS5536 high-res timer (MFGPT) events
- DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
- KCONFIG:=CONFIG_CS5535_CLOCK_EVENT_SRC
- FILES:=$(LINUX_DIR)/drivers/clocksource/cs5535-clockevt.ko
- AUTOLOAD:=$(call AutoLoad,50,cs5535-clockevt)
-endef
-
-define KernelPackage/cs5535-clockevt/description
- Kernel module for CS5535/6 high-res clock event source
-endef
-
-$(eval $(call KernelPackage,cs5535-clockevt))
-
-
-define KernelPackage/cs5535-mfgpt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=CS5535/6 Multifunction General Purpose Timer
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_CS5535_MFGPT
- FILES:=$(LINUX_DIR)/drivers/misc/cs5535-mfgpt.ko
- AUTOLOAD:=$(call AutoLoad,45,cs5535-mfgpt)
+ TITLE:=BCMA support
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ KCONFIG:=\
+ CONFIG_BCMA \
+ CONFIG_BCMA_POSSIBLE=y \
+ CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+ CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_DRIVER_MIPS=n \
+ CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+ CONFIG_BCMA_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+ AUTOLOAD:=$(call AutoLoad,29,bcma)
endef
-define KernelPackage/cs5535-mfgpt/description
- Kernel module for CS5535/6 multifunction general purpose timer.
+define KernelPackage/bcma/description
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
endef
-$(eval $(call KernelPackage,cs5535-mfgpt))
+$(eval $(call KernelPackage,bcma))
define KernelPackage/wdt-omap
define KernelPackage/wdt-orion
SUBMENU:=$(OTHER_MENU)
TITLE:=Marvell Orion Watchdog timer
- DEPENDS:=@TARGET_orion
+ DEPENDS:=@TARGET_orion||@TARGET_kirkwood
KCONFIG:=CONFIG_ORION_WATCHDOG
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
$(eval $(call KernelPackage,wdt-orion))
-define KernelPackage/wdt-sc520
+define KernelPackage/wdt-ath79
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SC520 Watchdog support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SC520_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
+ TITLE:=Atheros AR7XXX/AR9XXX watchdog timer
+ DEPENDS:=@TARGET_ar71xx
+ KCONFIG:=CONFIG_ATH79_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/ath79_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,ath79_wdt)
endef
-define KernelPackage/wdt-sc520/description
- Kernel module for SC520 Watchdog
+define KernelPackage/wdt-ath79/description
+ Kernel module for AR7XXX/AR9XXX watchdog timer.
endef
-$(eval $(call KernelPackage,wdt-sc520))
+$(eval $(call KernelPackage,wdt-ath79))
-define KernelPackage/wdt-scx200
+define KernelPackage/booke-wdt
SUBMENU:=$(OTHER_MENU)
- TITLE:=Natsemi SCX200 Watchdog support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_SCx200_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
+ TITLE:=PowerPC Book-E Watchdog Timer
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
+ KCONFIG:=CONFIG_BOOKE_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
endef
-define KernelPackage/wdt-scx200/description
- Kernel module for SCX200 Watchdog
+define KernelPackage/booke-wdt/description
+ Kernel module for PowerPC Book-E Watchdog Timer.
endef
-$(eval $(call KernelPackage,wdt-scx200))
+$(eval $(call KernelPackage,booke-wdt))
+
define KernelPackage/pwm
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,pwm-gpio))
-define KernelPackage/rtc-core
+
+define KernelPackage/rtc-marvell
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@(!LINUX_3_0||BROKEN)
- TITLE:=Real Time Clock class support
- KCONFIG:=CONFIG_RTC_CLASS
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-core.ko
- AUTOLOAD:=$(call AutoLoad,29,rtc-core)
+ TITLE:=Marvell SoC built-in RTC support
+ $(call AddDepends/rtc)
+ DEPENDS+=@TARGET_kirkwood||TARGET_orion
+ KCONFIG:=CONFIG_RTC_DRV_MV
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
endef
-define KernelPackage/rtc-core/description
- Generic RTC class support.
+define KernelPackage/rtc-marvell/description
+ Kernel module for Marvell SoC built-in RTC.
endef
-$(eval $(call KernelPackage,rtc-core))
+$(eval $(call KernelPackage,rtc-marvell))
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- DEPENDS:=+kmod-rtc-core
+ $(call AddDepends/rtc)
KCONFIG:=CONFIG_RTC_DRV_PCF8563
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
$(eval $(call KernelPackage,rtc-pcf8563))
-define KernelPackage/n810bm
+define KernelPackage/rtc-pcf2123
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF2123 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
+endef
+
+define KernelPackage/rtc-pcf2123/description
+ Kernel module for Philips PCF2123 RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf2123))
+
+define KernelPackage/rtc-pt7c4338
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Pericom PT7C4338 RTC support
+ $(call AddDepends/rtc,+kmod-i2c-core)
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
+endef
+
+define KernelPackage/rtc-pt7c4338/description
+ Kernel module for Pericom PT7C4338 i2c RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pt7c4338))
+
+
+define KernelPackage/mtdtests
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MTD subsystem tests
+ KCONFIG:=CONFIG_MTD_TESTS
+ FILES:=\
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
+endef
+
+define KernelPackage/mtdtests/description
+ Kernel modules for MTD subsystem/driver testing.
+endef
+
+$(eval $(call KernelPackage,mtdtests))
+
+
+define KernelPackage/nand
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NAND flash support
+ DEPENDS:=@!LINUX_2_6_39
+ KCONFIG:=CONFIG_MTD_NAND \
+ CONFIG_MTD_NAND_IDS \
+ CONFIG_MTD_NAND_ECC
+ FILES:= \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
+ $(LINUX_DIR)/drivers/mtd/nand/nand.ko
+ AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
+endef
+
+define KernelPackage/nand/description
+ Kernel module for NAND support.
+endef
+
+$(eval $(call KernelPackage,nand))
+
+
+define KernelPackage/nandsim
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NAND simulator
+ DEPENDS:=+kmod-nand
+ KCONFIG:=CONFIG_MTD_NAND_NANDSIM
+ FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
+endef
+
+define KernelPackage/nandsim/description
+ Kernel module for NAND flash simulation.
+endef
+
+$(eval $(call KernelPackage,nandsim))
+
+define KernelPackage/serial-8250
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_NR_UARTS=16 \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_SHARE_IRQ=y \
+ CONFIG_SERIAL_8250_DETECT_IRQ=n \
+ CONFIG_SERIAL_8250_RSA=n
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
+endef
+
+define KernelPackage/serial-8250/description
+ Kernel module for 8250 UART based serial ports.
+endef
+
+$(eval $(call KernelPackage,serial-8250))
+
+
+define KernelPackage/acpi-button
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ACPI Button Support
+ DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
+ KCONFIG:=CONFIG_ACPI_BUTTON
+ FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
+ AUTOLOAD:=$(call AutoLoad,06,button)
+endef
+
+define KernelPackage/acpi-button/description
+ Kernel module for ACPI Button support
+endef
+
+$(eval $(call KernelPackage,acpi-button))
+
+define KernelPackage/regmap
SUBMENU:=$(OTHER_MENU)
- TITLE:=Nokia N810 battery management driver
- DEPENDS:=@TARGET_omap24xx
- KCONFIG:=CONFIG_N810BM
- FILES:=$(LINUX_DIR)/drivers/cbus/n810bm.ko
- AUTOLOAD:=$(call AutoLoad,01,n810bm)
+ TITLE:=Generic register map support
+ KCONFIG:=CONFIG_REGMAP=y \
+ CONFIG_REGMAP_SPI \
+ CONFIG_REGMAP_I2C
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
+ $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
+ AUTOLOAD:=$(call AutoLoad,10,regmap-i2c regmap-spi)
endef
-define KernelPackage/n810bm/description
- Nokia N810 battery management driver.
- Controls battery power management and battery charging.
+define KernelPackage/regmap/description
+ Generic register map support
endef
-$(eval $(call KernelPackage,n810bm))
+$(eval $(call KernelPackage,regmap))