-BLMENU:=Block Devices
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
-define KernelPackage/libata
- TITLE:=libata
- DESCRIPTION:=libata
- KCONFIG:=$(CONFIG_ATA)
- SUBMENU:=$(BLMENU)
- FILES:=$(LINUX_DIR)/drivers/ata/libata.$(LINUX_KMOD_SUFFIX)
+BLOCK_MENU:=Block Devices
+
+define KernelPackage/aoe
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=ATA over Ethernet support
+ KCONFIG:=CONFIG_ATA_OVER_ETH
+ FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
+ AUTOLOAD:=$(call AutoLoad,30,aoe)
+endef
+
+define KernelPackage/aoe/description
+ Kernel support for ATA over Ethernet
+endef
+
+$(eval $(call KernelPackage,aoe))
+
+
+define KernelPackage/ata-core
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Serial and Parallel ATA support
+ DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax)
+ KCONFIG:=CONFIG_ATA
+ FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
+ AUTOLOAD:=$(call AutoLoad,21,libata,1)
+endef
+
+$(eval $(call KernelPackage,ata-core))
+
+
+define AddDepends/ata
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS+=kmod-ata-core $(1)
+endef
+
+
+define KernelPackage/ata-ahci
+ TITLE:=AHCI Serial ATA support
+ KCONFIG:=CONFIG_SATA_AHCI
+ FILES:= \
+ $(LINUX_DIR)/drivers/ata/ahci.ko \
+ $(LINUX_DIR)/drivers/ata/libahci.ko
+ AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-ahci/description
+ Support for AHCI Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-ahci))
+
+
+define KernelPackage/ata-artop
+ TITLE:=ARTOP 6210/6260 PATA support
+ KCONFIG:=CONFIG_PATA_ARTOP
+ FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
+ AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-artop/description
+ PATA support for ARTOP 6210/6260 host controllers.
+endef
+
+$(eval $(call KernelPackage,ata-artop))
+
+
+define KernelPackage/ata-marvell-sata
+ TITLE:=Marvell Serial ATA support
+ KCONFIG:=CONFIG_SATA_MV
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-marvell-sata/description
+ SATA support for marvell chipsets
endef
-$(eval $(call KernelPackage,libata))
+
+$(eval $(call KernelPackage,ata-marvell-sata))
+
+
+define KernelPackage/ata-nvidia-sata
+ TITLE:=Nvidia Serial ATA support
+ KCONFIG:=CONFIG_SATA_NV
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
+ $(call AddDepends/ata)
+endef
+
+$(eval $(call KernelPackage,ata-nvidia-sata))
+
+
+define KernelPackage/ata-pdc202xx-old
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Older Promise PATA controller support
+ DEPENDS:=kmod-ata-core
+ KCONFIG:= \
+ CONFIG_ATA_SFF=y \
+ CONFIG_PATA_PDC_OLD
+ FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
+ AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+endef
+
+define KernelPackage/ata-pdc202xx-old/description
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters.
+endef
+
+$(eval $(call KernelPackage,ata-pdc202xx-old))
+
define KernelPackage/ata-piix
- TITLE:=ata-piix
- DESCRIPTION:=Kernel module for Intel PIIX SATA controller
- KCONFIG:=$(CONFIG_ATA_PIIX)
- SUBMENU:=$(BLMENU)
- AUTOLOAD:=$(call AutoLoad,30,scsi_mod libata sd_mod ata_piix)
- FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.$(LINUX_KMOD_SUFFIX)
- DEPENDS:=+kmod-libata +kmod-ide-core +kmod-scsi-core
+ TITLE:=Intel PIIX PATA/SATA support
+ KCONFIG:=CONFIG_ATA_PIIX
+ FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
+ AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-piix/description
+ SATA support for Intel ICH5/6/7/8 series host controllers and
+ PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
endef
+
$(eval $(call KernelPackage,ata-piix))
-define KernelPackage/pata-artop
- TITLE:=pata-artop
- DESCRIPTION:=Kernel module for ARTOP PATA controller
- KCONFIG:=$(CONFIG_PATA_ARTOP)
- SUBMENU:=$(BLMENU)
- AUTOLOAD:=$(call AutoLoad,30,libata pata_artop)
- FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.$(LINUX_KMOD_SUFFIX)
- DEPENDS:=+kmod-libata +kmod-scsi-core
+
+define KernelPackage/ata-sil
+ TITLE:=Silicon Image SATA support
+ KCONFIG:=CONFIG_SATA_SIL
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil/description
+ Support for Silicon Image Serial ATA controllers.
endef
-$(eval $(call KernelPackage,pata-artop))
+
+$(eval $(call KernelPackage,ata-sil))
+
+
+define KernelPackage/ata-sil24
+ TITLE:=Silicon Image 3124/3132 SATA support
+ KCONFIG:=CONFIG_SATA_SIL24
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil24/description
+ Support for Silicon Image 3124/3132 Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-sil24))
+
+
+define KernelPackage/ata-sis
+ TITLE:=SIS SATA support
+ KCONFIG:=CONFIG_SATA_SIS
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_sis.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_sis,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sis/description
+ Support for SIS Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-sis))
+
+
+define KernelPackage/ata-via-sata
+ TITLE:=VIA SATA support
+ KCONFIG:=CONFIG_SATA_VIA
+ FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
+ AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-via-sata/description
+ This option enables support for VIA Serial ATA.
+endef
+
+$(eval $(call KernelPackage,ata-via-sata))
+
+
+define KernelPackage/block2mtd
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Block device MTD emulation
+ KCONFIG:=CONFIG_MTD_BLOCK2MTD
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
+endef
+
+$(eval $(call KernelPackage,block2mtd))
+
+
+define KernelPackage/dm
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Device Mapper
+ # All the "=n" are unnecessary, they're only there
+ # to stop the config from asking the question.
+ # MIRROR is M because I've needed it for pvmove.
+ KCONFIG:= \
+ CONFIG_BLK_DEV_MD=n \
+ CONFIG_DM_DEBUG=n \
+ CONFIG_DM_UEVENT=n \
+ CONFIG_DM_DELAY=n \
+ CONFIG_DM_MULTIPATH=n \
+ CONFIG_DM_ZERO=n \
+ CONFIG_DM_SNAPSHOT=n \
+ CONFIG_DM_LOG_USERSPACE=n \
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_DM \
+ CONFIG_DM_CRYPT \
+ CONFIG_DM_MIRROR
+ FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
+ AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
+endef
+
+define KernelPackage/dm/description
+ Kernel module necessary for LVM2 support
+endef
+
+$(eval $(call KernelPackage,dm))
+
+
+define KernelPackage/md-mod
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=MD RAID
+ KCONFIG:= \
+ CONFIG_MD=y \
+ CONFIG_BLK_DEV_MD=m \
+ CONFIG_MD_AUTODETECT=y \
+ CONFIG_MD_FAULTY=n
+ FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
+ AUTOLOAD:=$(call AutoLoad,27,md-mod)
+endef
+
+define KernelPackage/md-mod/description
+ Kernel RAID md module (md-mod.ko).
+ You will need to select at least one RAID level module below.
+endef
+
+$(eval $(call KernelPackage,md-mod))
+
+
+define KernelPackage/md/Depends
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS:=kmod-md-mod $(1)
+endef
+
+
+define KernelPackage/md-linear
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Linear Module
+ KCONFIG:=CONFIG_MD_LINEAR
+ FILES:=$(LINUX_DIR)/drivers/md/linear.ko
+ AUTOLOAD:=$(call AutoLoad,28,linear)
+endef
+
+define KernelPackage/md-linear/description
+ RAID "Linear" or "Append" driver module (linear.ko)
+endef
+
+$(eval $(call KernelPackage,md-linear))
+
+
+define KernelPackage/md-raid0
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID0 Module
+ KCONFIG:=CONFIG_MD_RAID0
+ FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid0)
+endef
+
+define KernelPackage/md-raid0/description
+ RAID Level 0 (Striping) driver module (raid0.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid0))
+
+
+define KernelPackage/md-raid1
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID1 Module
+ KCONFIG:=CONFIG_MD_RAID1
+ FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid1)
+endef
+
+define KernelPackage/md-raid1/description
+ RAID Level 1 (Mirroring) driver (raid1.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid1))
+
+
+define KernelPackage/md-raid10
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID10 Module
+ KCONFIG:=CONFIG_MD_RAID10
+ FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
+ AUTOLOAD:=$(call AutoLoad,28,raid10)
+endef
+
+define KernelPackage/md-raid10/description
+ RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid10))
+
+
+define KernelPackage/md-raid456
+$(call KernelPackage/md/Depends,)
+ TITLE:=RAID Level 456 Driver
+ KCONFIG:= \
+ CONFIG_XOR_BLOCKS \
+ CONFIG_ASYNC_CORE \
+ CONFIG_ASYNC_MEMCPY \
+ CONFIG_ASYNC_XOR \
+ CONFIG_ASYNC_PQ \
+ CONFIG_ASYNC_RAID6_RECOV \
+ CONFIG_ASYNC_RAID6_TEST=n \
+ CONFIG_MD_RAID6_PQ \
+ CONFIG_MD_RAID456 \
+ CONFIG_MULTICORE_RAID456=n
+ FILES:= \
+ $(LINUX_DIR)/crypto/xor.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
+ $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
+ $(LINUX_DIR)/drivers/md/raid456.ko \
+ $(LINUX_DIR)/lib/raid6/raid6_pq.ko
+ AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
+endef
+
+define KernelPackage/md-raid456/description
+ RAID Level 4,5,6 kernel module (raid456.ko)
+
+ Includes the following modules required by
+ raid456.ko:
+ xor.ko
+ async_tx.ko
+ async_xor.ko
+ async_memcpy.ko
+ async_pq.ko
+ async_raid5_recov.ko
+ raid6_pq.ko
+endef
+
+$(eval $(call KernelPackage,md-raid456))
+
+
+define KernelPackage/md-multipath
+$(call KernelPackage/md/Depends,)
+ TITLE:=MD Multipath Module
+ KCONFIG:=CONFIG_MD_MULTIPATH
+ FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
+ AUTOLOAD:=$(call AutoLoad,29,multipath)
+endef
+
+define KernelPackage/md-multipath/description
+ Multipath driver module (multipath.ko)
+endef
+
+$(eval $(call KernelPackage,md-multipath))
+
+
+define KernelPackage/ide-core
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=IDE (ATA/ATAPI) device support
+ DEPENDS:=@PCI_SUPPORT
+ KCONFIG:= \
+ CONFIG_IDE \
+ CONFIG_BLK_DEV_IDE \
+ CONFIG_BLK_DEV_IDEDISK \
+ CONFIG_IDE_GD \
+ CONFIG_IDE_GD_ATA=y \
+ CONFIG_IDE_GD_ATAPI=n \
+ CONFIG_IDEPCI_PCIBUS_ORDER=y \
+ CONFIG_BLK_DEV_IDEDMA_PCI=y \
+ CONFIG_BLK_DEV_IDEPCI=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/ide/ide-core.ko \
+ $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
+ AUTOLOAD:= \
+ $(call AutoLoad,20,ide-core,1) \
+ $(call AutoLoad,40,ide-gd_mod,1)
+endef
+
+define KernelPackage/ide-core/description
+ Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
+ Includes:
+ - ide-core
+ - ide-gd_mod
+endef
+
+$(eval $(call KernelPackage,ide-core))
+
+
+define AddDepends/ide
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS+=kmod-ide-core $(1)
+endef
+
+
+define KernelPackage/ide-generic
+ SUBMENU:=$(BLOCK_MENU)
+ DEPENDS:=@PCI_SUPPORT
+ TITLE:=Kernel support for generic PCI IDE chipsets
+ KCONFIG:=CONFIG_BLK_DEV_GENERIC
+ FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
+ AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
+ $(call AddDepends/ide)
+endef
+
+$(eval $(call KernelPackage,ide-generic))
+
+
+define KernelPackage/ide-generic-old
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for generic (legacy) IDE chipsets
+ KCONFIG:=CONFIG_IDE_GENERIC
+ FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
+ AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
+ $(call AddDepends/ide)
+endef
+
+$(eval $(call KernelPackage,ide-generic-old))
+
+
+define KernelPackage/ide-aec62xx
+ TITLE:=Acard AEC62xx IDE driver
+ DEPENDS:=@PCI_SUPPORT
+ KCONFIG:=CONFIG_BLK_DEV_AEC62XX
+ FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
+ AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-aec62xx/description
+ Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
+endef
+
+$(eval $(call KernelPackage,ide-aec62xx,1))
+
+
+define KernelPackage/ide-pdc202xx
+ TITLE:=Promise PDC202xx IDE driver
+ DEPENDS:=@PCI_SUPPORT
+ KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
+ FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
+ AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-pdc202xx/description
+ Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
+ controllers.
+endef
+
+$(eval $(call KernelPackage,ide-pdc202xx))
+
+
+define KernelPackage/ide-it821x
+ TITLE:=ITE IT821x IDE driver
+ DEPENDS:=@PCI_SUPPORT
+ KCONFIG:=CONFIG_BLK_DEV_IT821X
+ FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
+ AUTOLOAD:=$(call AutoLoad,30,it821x,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-it821x/description
+ Kernel module for the ITE IDE821x IDE controllers.
+endef
+
+$(eval $(call KernelPackage,ide-it821x))
+
+
+define KernelPackage/cs5535
+ TITLE:=NSC/AMD CS5535 chipset support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_BLK_DEV_CS5535
+ FILES=$(LINUX_DIR)/drivers/ide/cs5535.ko
+ AUTOLOAD:=$(call AutoLoad,30,cs5535,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/cs5535/description
+ Kernel module for the NSC/AMD CS5535 companion chip
+endef
+
+$(eval $(call KernelPackage,cs5535))
+
+
+define KernelPackage/cs5536
+ TITLE:=AMD CS5536 chipset support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_BLK_DEV_CS5536
+ FILES=$(LINUX_DIR)/drivers/ide/cs5536.ko
+ AUTOLOAD:=$(call AutoLoad,30,cs5536,1)
+ $(call AddDepends/ide)
+endef
+
+define KernelPackage/cs5536/description
+ Kernel module for the AMD CS5536 Geode LX companion chip
+endef
+
+$(eval $(call KernelPackage,cs5536))
+
+
+define KernelPackage/pata-cs5535
+ TITLE:=CS5535 PATA support
+ DEPENDS:=@TARGET_x86 @PCI_SUPPORT
+ KCONFIG:=CONFIG_PATA_CS5535
+ FILES=$(LINUX_DIR)/drivers/ata/pata_cs5535.ko
+ AUTOLOAD:=$(call AutoLoad,30,pata_cs5535,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/pata-cs5535/description
+ Kernel module for the NSC/AMD CS5535 companion chip
+endef
+
+$(eval $(call KernelPackage,pata-cs5535))
+
+
+define KernelPackage/pata-cs5536
+ TITLE:=CS5536 PATA support
+ DEPENDS:=@TARGET_x86 @PCI_SUPPORT
+ KCONFIG:=CONFIG_PATA_CS5536
+ FILES=$(LINUX_DIR)/drivers/ata/pata_cs5536.ko
+ AUTOLOAD:=$(call AutoLoad,30,pata_cs5536,1)
+ $(call AddDepends/ata)
+endef
+
+define KernelPackage/pata-cs5536/description
+ Kernel module for the AMD CS5536 Geode LX companion chip
+endef
+
+$(eval $(call KernelPackage,pata-cs5536))
+
+
+define KernelPackage/libsas
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=SAS Domain Transport Attributes
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
+ CONFIG_SCSI_SAS_ATTRS \
+ CONFIG_SCSI_SAS_ATA=y \
+ CONFIG_SCSI_SAS_HOST_SMP=y \
+ CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
+ $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
+ AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
+endef
+
+define KernelPackage/libsas/description
+ SAS Domain Transport Attributes support.
+endef
+
+$(eval $(call KernelPackage,libsas,1))
+
+
+define KernelPackage/loop
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Loopback device support
+ KCONFIG:= \
+ CONFIG_BLK_DEV_LOOP \
+ CONFIG_BLK_DEV_CRYPTOLOOP=n
+ FILES:=$(LINUX_DIR)/drivers/block/loop.ko
+ AUTOLOAD:=$(call AutoLoad,30,loop)
+endef
+
+define KernelPackage/loop/description
+ Kernel module for loopback device support
+endef
+
+$(eval $(call KernelPackage,loop))
+
+
+define KernelPackage/mvsas
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Marvell 88SE6440 SAS/SATA driver
+ DEPENDS:=@TARGET_x86 +kmod-libsas
+ KCONFIG:= \
+ CONFIG_SCSI_MVSAS \
+ CONFIG_SCSI_MVSAS_TASKLET=n
+ FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
+ AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
+endef
+
+define KernelPackage/mvsas/description
+ Kernel support for the Marvell SAS SCSI adapters
+endef
+
+$(eval $(call KernelPackage,mvsas))
+
+
+define KernelPackage/nbd
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Network block device support
+ KCONFIG:=CONFIG_BLK_DEV_NBD
+ FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
+ AUTOLOAD:=$(call AutoLoad,30,nbd)
+endef
+
+define KernelPackage/nbd/description
+ Kernel module for network block device support
+endef
+
+$(eval $(call KernelPackage,nbd))
+
+
+define KernelPackage/scsi-core
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=SCSI device support
+ KCONFIG:= \
+ CONFIG_SCSI \
+ CONFIG_BLK_DEV_SD
+ FILES:= \
+ $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
+ $(LINUX_DIR)/drivers/scsi/sd_mod.ko
+ AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
+endef
+
+$(eval $(call KernelPackage,scsi-core))
+
+
+define KernelPackage/scsi-generic
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for SCSI generic
+ DEPENDS:=+kmod-scsi-core
+ KCONFIG:= \
+ CONFIG_CHR_DEV_SG
+ FILES:= \
+ $(LINUX_DIR)/drivers/scsi/sg.ko
+ AUTOLOAD:=$(call AutoLoad,65,sg)
+endef
+
+$(eval $(call KernelPackage,scsi-generic))
+
+
+define KernelPackage/scsi-cdrom
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for CD / DVD drives
+ DEPENDS:=+kmod-scsi-core
+ KCONFIG:= \
+ CONFIG_BLK_DEV_SR \
+ CONFIG_BLK_DEV_SR_VENDOR=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
+ $(LINUX_DIR)/drivers/scsi/sr_mod.ko
+ AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
+endef
+
+$(eval $(call KernelPackage,scsi-cdrom))
+