#
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
FILES:= \
$(LINUX_DIR)/drivers/usb/core/usbcore.ko \
- $(LINUX_DIR)/drivers/usb/usb-common.ko
+ $(LINUX_DIR)/drivers/usb/usb-common.ko@lt3.16 \
+ $(LINUX_DIR)/drivers/usb/common/usb-common.ko@ge3.16
AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
$(call AddDepends/nls)
endef
endef
+define KernelPackage/usb-musb-hdrc
+ TITLE:=Support for Mentor Graphics silicon dual role USB
+ KCONFIG:= \
+ CONFIG_USB_MUSB_HDRC \
+ CONFIG_USB_INVENTRA_DMA=n \
+ CONFIG_USB_TI_CPPI41_DMA=n \
+ CONFIG_MUSB_PIO_ONLY=y \
+ CONFIG_USB_MUSB_DUAL_ROLE=y \
+ CONFIG_USB_MUSB_GADGET=n \
+ CONFIG_USB_MUSB_HOST=n \
+ CONFIG_USB_MUSB_DEBUG=y
+ DEPENDS:= \
+ @(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
+ +TARGET_omap24xx:kmod-usb-musb-tusb6010
+ FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
+ AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-musb-hdrc/description
+ Kernel support for Mentor Graphics silicon dual role USB device.
+endef
+
+$(eval $(call KernelPackage,usb-musb-hdrc))
+
+
+define KernelPackage/usb-musb-platformglue
+ TITLE:=MUSB platform glue layer
+ KCONFIG:= \
+ CONFIG_USB_MUSB_TUSB6010=n \
+ CONFIG_USB_MUSB_OMAP2PLUS=n \
+ CONFIG_USB_MUSB_AM35X=n \
+ CONFIG_USB_MUSB_DSPS \
+ CONFIG_USB_MUSB_UX500=n
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
+ $(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-control musb_dsps musb_am335x)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-musb-platformglue/description
+ MUSB platform glue modules
+endef
+
+$(eval $(call KernelPackage,usb-musb-platformglue))
+
+
+define KernelPackage/usb-musb-tusb6010
+ TITLE:=Support for TUSB 6010
+ KCONFIG:=CONFIG_USB_MUSB_TUSB6010
+ DEPENDS:=@TARGET_omap24xx
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-musb-tusb6010/description
+ TUSB6010 support
+endef
+
+$(eval $(call KernelPackage,usb-musb-tusb6010))
+
+
+define KernelPackage/usb-phy-nop
+ TITLE:=Support for USB NOP transceiver
+ KCONFIG:=CONFIG_NOP_USB_XCEIV
+ HIDDEN:=1
+ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/phy/phy-generic.ko),)
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko
+ AUTOLOAD:=$(call AutoLoad,43,phy-generic)
+else
+ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/phy/phy-nop.ko),)
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-nop.ko
+ AUTOLOAD:=$(call AutoLoad,43,phy-nop)
+else
+ FILES:=$(LINUX_DIR)/drivers/usb/otg/nop-usb-xceiv.ko
+ AUTOLOAD:=$(call AutoLoad,43,nop-usb-xceiv)
+endif
+endif
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-nop/description
+ Support for USB NOP transceiver
+endef
+
+$(eval $(call KernelPackage,usb-phy-nop))
+
+
+define KernelPackage/usb-phy-am335x
+ TITLE:=Support for AM335x USB PHY
+ KCONFIG:= \
+ CONFIG_AM335X_PHY_USB \
+ CONFIG_AM335X_CONTROL_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
+ $(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
+ AUTOLOAD:=$(call AutoLoad,44,phy-am335x)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-am335x/description
+ Support for AM335x USB PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-am335x))
+
+
+define KernelPackage/usb-phy-omap-usb2
+ TITLE:=Support for OMAP2 USB PHY
+ KCONFIG:= \
+ CONFIG_OMAP_USB2 \
+ CONFIG_OMAP_CONTROL_USB
+ DEPENDS:=@TARGET_omap
+ FILES:= \
+ $(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
+ $(LINUX_DIR)/drivers/usb/phy/phy-omap-control.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-control phy-omap-usb2)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-omap-usb2/description
+ Support for AM335x USB PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-omap-usb2))
+
+
+define KernelPackage/usb-phy-omap-usb3
+ TITLE:=Support for OMAP USB3 PHY
+ KCONFIG:=CONFIG_OMAP_USB3
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-omap-usb3/description
+ Support for OMAP USB3 PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-omap-usb3))
+
+
+define KernelPackage/usb-phy-twl4030
+ TITLE:=Support for TWL4030 OTG PHY
+ KCONFIG:=CONFIG_TWL4030_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-twl4030/description
+ Support for TWL4030/TWL5030/TPS659x0 OTG PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-twl4030))
+
+
+define KernelPackage/usb-phy-twl6030
+ TITLE:=Support for TWL6030 OTG PHY
+ KCONFIG:=CONFIG_TWL6030_USB
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-twl6030/description
+ Support for TWL6030 OTG PHY
+endef
+
+$(eval $(call KernelPackage,usb-phy-twl6030))
+
+
define KernelPackage/usb-gadget
TITLE:=USB Gadget support
KCONFIG:=CONFIG_USB_GADGET
- FILES:=
- AUTOLOAD:=
+ FILES:=\
+ $(LINUX_DIR)/drivers/usb/gadget/udc-core.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko@ge3.18
+ AUTOLOAD:=$(call AutoLoad,45,udc-core)
DEPENDS:=@USB_GADGET_SUPPORT
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-gadget))
+define KernelPackage/usb-lib-composite
+ TITLE:=USB lib composite
+ KCONFIG:=CONFIG_USB_LIBCOMPOSITE
+ DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/libcomposite.ko
+ AUTOLOAD:=$(call AutoLoad,50,libcomposite)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-lib-composite/description
+ Lib Composite
+endef
+
+$(eval $(call KernelPackage,usb-lib-composite))
+
define KernelPackage/usb-eth-gadget
TITLE:=USB Ethernet Gadget support
KCONFIG:= \
CONFIG_USB_ETH \
CONFIG_USB_ETH_RNDIS=y \
- CONFIG_USB_ETH_EEM=y
- DEPENDS:=+kmod-usb-gadget
+ CONFIG_USB_ETH_EEM=n
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ifeq ($(CONFIG_LINUX_3_10),)
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/u_ether.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/u_rndis.ko@lt3.14 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm_subset.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_rndis.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/g_ether.ko@lt3.18
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm g_ether)
+else
FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
AUTOLOAD:=$(call AutoLoad,52,g_ether)
+endif
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-eth-gadget))
+define KernelPackage/usb-serial-gadget
+ TITLE:=USB Serial Gadget support
+ KCONFIG:=CONFIG_USB_G_SERIAL
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko@ge3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/u_serial.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_acm.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_obex.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/usb_f_serial.ko@lt3.18 \
+ $(LINUX_DIR)/drivers/usb/gadget/g_serial.ko@lt3.18
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_acm g_serial)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-serial-gadget/description
+ Kernel support for USB Serial Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-serial-gadget))
+
+
define KernelPackage/usb-uhci
TITLE:=Support for UHCI controllers
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
CONFIG_USB_OHCI_ATH79=y \
+ CONFIG_USB_OHCI_HCD_AT91=y \
CONFIG_USB_OHCI_BCM63XX=y \
CONFIG_USB_OCTEON_OHCI=y \
+ CONFIG_USB_OHCI_HCD_OMAP3=y \
CONFIG_USB_OHCI_HCD_PLATFORM=y
FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
+ifeq ($(CONFIG_LINUX_3_10),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-platform.ko
+endif
+ AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb2-fsl))
+define KernelPackage/usb2-omap
+ TITLE:=Support for USB2 for OMAP
+ DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
+ KCONFIG:=CONFIG_USB_EHCI_HCD_OMAP
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-omap.ko
+ AUTOLOAD:=$(call AutoLoad,39,ehci-omap)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2-omap/description
+ Kernel support for OMAP USB2 (EHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb2-omap))
+
+
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
CONFIG_USB_OCTEON_EHCI=y \
CONFIG_USB_EHCI_HCD_ORION=y \
CONFIG_USB_EHCI_HCD_PLATFORM=y
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.8.0)),1)
FILES:= \
$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko \
$(LINUX_DIR)/drivers/usb/host/ehci-platform.ko
- AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform,1)
-else
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
- AUTOLOAD:=$(call AutoLoad,40,ehci-hcd,1)
-endif
+ ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),)
+ FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko
+ endif
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion,1)
$(call AddDepends/usb)
endef
define KernelPackage/usb2-pci
TITLE:=Support for PCI USB2 controllers
- DEPENDS:=@PCI_SUPPORT @(LINUX_3_8||LINUX_3_9||LINUX_3_10) +kmod-usb2
+ DEPENDS:=@PCI_SUPPORT +kmod-usb2
KCONFIG:=CONFIG_USB_EHCI_PCI
FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko
AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1)
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=@LINUX_3_10
+ DEPENDS:=@!LINUX_3_10 +(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs):kmod-usb-gadget
KCONFIG:= \
CONFIG_USB_DWC2 \
+ CONFIG_USB_DWC2_PCI \
+ CONFIG_USB_DWC2_PLATFORM \
CONFIG_USB_DWC2_DEBUG=n \
CONFIG_USB_DWC2_VERBOSE=n \
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n
FILES:= \
- $(LINUX_DIR)/drivers/staging/dwc2/dwc2.ko \
- $(LINUX_DIR)/drivers/staging/dwc2/dwc2_platform.ko
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2.ko \
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2_platform.ko
AUTOLOAD:=$(call AutoLoad,54,dwc2 dwc2_platform,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usb-dwc2))
+define KernelPackage/usb2-oxnas
+ TITLE:=OXNAS USB controller driver
+ DEPENDS:=@TARGET_oxnas +kmod-usb2
+ KCONFIG:=CONFIG_USB_EHCI_OXNAS
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko
+ AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb2-oxnas/description
+ This driver provides USB Device Controller support for the
+ EHCI USB host built-in to the PLXTECH NAS782x SoC
+endef
+
+$(eval $(call KernelPackage,usb2-oxnas))
+
+
define KernelPackage/usb-acm
TITLE:=Support for modems/isdn controllers
KCONFIG:=CONFIG_USB_ACM
FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
- AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
+ AUTOLOAD:=$(call AutoProbe,cdc-acm)
$(call AddDepends/usb)
endef
TITLE:=USB Wireless Device Management
KCONFIG:=CONFIG_USB_WDM
FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-wdm.ko
- AUTOLOAD:=$(call AutoLoad,60,cdc-wdm)
+ AUTOLOAD:=$(call AutoProbe,cdc-wdm)
$(call AddDepends/usb)
$(call AddDepends/usb-net)
endef
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
- AUTOLOAD:=$(call AutoLoad,60,snd-usbmidi-lib snd-usb-audio)
+ AUTOLOAD:=$(call AutoProbe,snd-usbmidi-lib snd-usb-audio)
else
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
- AUTOLOAD:=$(call AutoLoad,60,snd-usb-lib snd-usb-audio)
+ AUTOLOAD:=$(call AutoProbe,snd-usb-lib snd-usb-audio)
endif
endef
TITLE:=Support for printers
KCONFIG:=CONFIG_USB_PRINTER
FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
- AUTOLOAD:=$(call AutoLoad,60,usblp)
+ AUTOLOAD:=$(call AutoProbe,usblp)
$(call AddDepends/usb)
endef
TITLE:=Support for USB-to-Serial converters
KCONFIG:=CONFIG_USB_SERIAL
FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.ko
- AUTOLOAD:=$(call AutoLoad,60,usbserial)
+ AUTOLOAD:=$(call AutoProbe,usbserial)
$(call AddDepends/usb)
endef
TITLE:=Support for Belkin devices
KCONFIG:=CONFIG_USB_SERIAL_BELKIN
FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.ko
- AUTOLOAD:=$(call AutoLoad,65,belkin_sa)
+ AUTOLOAD:=$(call AutoProbe,belkin_sa)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for CH341 devices
KCONFIG:=CONFIG_USB_SERIAL_CH341
FILES:=$(LINUX_DIR)/drivers/usb/serial/ch341.ko
- AUTOLOAD:=$(call AutoLoad,65,ch341)
+ AUTOLOAD:=$(call AutoProbe,ch341)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for FTDI devices
KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.ko
- AUTOLOAD:=$(call AutoLoad,65,ftdi_sio)
+ AUTOLOAD:=$(call AutoProbe,ftdi_sio)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for TI USB 3410/5052
KCONFIG:=CONFIG_USB_SERIAL_TI
FILES:=$(LINUX_DIR)/drivers/usb/serial/ti_usb_3410_5052.ko
- AUTOLOAD:=$(call AutoLoad,65,ti_usb_3410_5052)
+ AUTOLOAD:=$(call AutoProbe,ti_usb_3410_5052)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for IPWireless 3G devices
KCONFIG:=CONFIG_USB_SERIAL_IPW
FILES:=$(LINUX_DIR)/drivers/usb/serial/ipw.ko
- AUTOLOAD:=$(call AutoLoad,65,ipw)
+ AUTOLOAD:=$(call AutoProbe,ipw)
$(call AddDepends/usb-serial,+kmod-usb-serial-wwan)
endef
TITLE:=Support for Magic Control Tech. devices
KCONFIG:=CONFIG_USB_SERIAL_MCT_U232
FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.ko
- AUTOLOAD:=$(call AutoLoad,65,mct_u232)
+ AUTOLOAD:=$(call AutoProbe,mct_u232)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Moschip MOS7720 devices
KCONFIG:=CONFIG_USB_SERIAL_MOS7720
FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7720.ko
- AUTOLOAD:=$(call AutoLoad,65,mos7720)
+ AUTOLOAD:=$(call AutoProbe,mos7720)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Prolific PL2303 devices
KCONFIG:=CONFIG_USB_SERIAL_PL2303
FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.ko
- AUTOLOAD:=$(call AutoLoad,65,pl2303)
+ AUTOLOAD:=$(call AutoProbe,pl2303)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Silicon Labs cp210x devices
KCONFIG:=CONFIG_USB_SERIAL_CP210X
FILES:=$(LINUX_DIR)/drivers/usb/serial/cp210x.ko
- AUTOLOAD:=$(call AutoLoad,65,cp210x)
+ AUTOLOAD:=$(call AutoProbe,cp210x)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for ArkMicroChips ARK3116 devices
KCONFIG:=CONFIG_USB_SERIAL_ARK3116
FILES:=$(LINUX_DIR)/drivers/usb/serial/ark3116.ko
- AUTOLOAD:=$(call AutoLoad,65,ark3116)
+ AUTOLOAD:=$(call AutoProbe,ark3116)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Ours Technology OTI6858 devices
KCONFIG:=CONFIG_USB_SERIAL_OTI6858
FILES:=$(LINUX_DIR)/drivers/usb/serial/oti6858.ko
- AUTOLOAD:=$(call AutoLoad,65,oti6858)
+ AUTOLOAD:=$(call AutoProbe,oti6858)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Sierra Wireless devices
KCONFIG:=CONFIG_USB_SERIAL_SIERRAWIRELESS
FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.ko
- AUTOLOAD:=$(call AutoLoad,65,sierra)
+ AUTOLOAD:=$(call AutoProbe,sierra)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Motorola usb phone
KCONFIG:=CONFIG_USB_SERIAL_MOTOROLA
FILES:=$(LINUX_DIR)/drivers/usb/serial/moto_modem.ko
- AUTOLOAD:=$(call AutoLoad,65,moto_modem)
+ AUTOLOAD:=$(call AutoProbe,moto_modem)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Handspring Visor devices
KCONFIG:=CONFIG_USB_SERIAL_VISOR
FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.ko
- AUTOLOAD:=$(call AutoLoad,65,visor)
+ AUTOLOAD:=$(call AutoProbe,visor)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for CypressM8 USB-Serial
KCONFIG:=CONFIG_USB_SERIAL_CYPRESS_M8
FILES:=$(LINUX_DIR)/drivers/usb/serial/cypress_m8.ko
- AUTOLOAD:=$(call AutoLoad,65,cypress_m8)
+ AUTOLOAD:=$(call AutoProbe,cypress_m8)
$(call AddDepends/usb-serial)
endef
FILES:= \
$(LINUX_DIR)/drivers/usb/serial/keyspan.ko \
$(wildcard $(LINUX_DIR)/drivers/usb/misc/ezusb.ko)
- AUTOLOAD:=$(call AutoLoad,65,keyspan)
+ AUTOLOAD:=$(call AutoProbe,ezusb keyspan)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for GSM and CDMA modems
KCONFIG:=CONFIG_USB_SERIAL_WWAN
FILES:=$(LINUX_DIR)/drivers/usb/serial/usb_wwan.ko
- AUTOLOAD:=$(call AutoLoad,61,usb_wwan)
+ AUTOLOAD:=$(call AutoProbe,usb_wwan)
$(call AddDepends/usb-serial)
endef
DEPENDS:=+kmod-usb-serial-wwan
KCONFIG:=CONFIG_USB_SERIAL_OPTION
FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko
- AUTOLOAD:=$(call AutoLoad,65,option)
+ AUTOLOAD:=$(call AutoProbe,option)
$(call AddDepends/usb-serial)
endef
TITLE:=Support for Qualcomm USB serial
KCONFIG:=CONFIG_USB_SERIAL_QUALCOMM
FILES:=$(LINUX_DIR)/drivers/usb/serial/qcserial.ko
- AUTOLOAD:=$(call AutoLoad,65,qcserial)
+ AUTOLOAD:=$(call AutoProbe,qcserial)
$(call AddDepends/usb-serial,+kmod-usb-serial-wwan)
endef
DEPENDS:= +kmod-scsi-core
KCONFIG:=CONFIG_USB_STORAGE
FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko
- AUTOLOAD:=$(call AutoLoad,60,usb-storage,1)
+ AUTOLOAD:=$(call AutoProbe,usb-storage,1)
$(call AddDepends/usb)
endef
$(LINUX_DIR)/drivers/usb/storage/ums-sddr09.ko \
$(LINUX_DIR)/drivers/usb/storage/ums-sddr55.ko \
$(LINUX_DIR)/drivers/usb/storage/ums-usbat.ko
- AUTOLOAD:=$(call AutoLoad,60,ums-alauda ums-cypress ums-datafab \
+ AUTOLOAD:=$(call AutoProbe,ums-alauda ums-cypress ums-datafab \
ums-freecom ums-isd200 ums-jumpshot \
ums-karma ums-sddr09 ums-sddr55 ums-usbat)
endef
DEPENDS:=+kmod-atm
KCONFIG:=CONFIG_USB_ATM
FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.ko
- AUTOLOAD:=$(call AutoLoad,60,usbatm)
+ AUTOLOAD:=$(call AutoProbe,usbatm)
$(call AddDepends/usb)
endef
TITLE:=SpeedTouch USB ADSL modems support
KCONFIG:=CONFIG_USB_SPEEDTOUCH
FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.ko
- AUTOLOAD:=$(call AutoLoad,70,speedtch)
+ AUTOLOAD:=$(call AutoProbe,speedtch)
$(call AddDepends/usb-atm)
endef
TITLE:=Eagle 8051 based USB ADSL modems support
FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.ko
KCONFIG:=CONFIG_USB_UEAGLEATM
- AUTOLOAD:=$(call AutoLoad,70,ueagle-atm)
+ AUTOLOAD:=$(call AutoProbe,ueagle-atm)
$(call AddDepends/usb-atm)
endef
TITLE:=cxacru
FILES:=$(LINUX_DIR)/drivers/usb/atm/cxacru.ko
KCONFIG:=CONFIG_USB_CXACRU
- AUTOLOAD:=$(call AutoLoad,70,cxacru)
+ AUTOLOAD:=$(call AutoProbe,cxacru)
$(call AddDepends/usb-atm)
endef
define KernelPackage/usb-net
TITLE:=Kernel modules for USB-to-Ethernet convertors
- KCONFIG:=CONFIG_USB_USBNET CONFIG_MII=y
- AUTOLOAD:=$(call AutoLoad,60,usbnet)
+ DEPENDS:=+kmod-mii
+ KCONFIG:=CONFIG_USB_USBNET \
+ CONFIG_USB_NET_DRIVERS@ge3.18
+ AUTOLOAD:=$(call AutoProbe,usbnet)
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
$(call AddDepends/usb)
endef
define KernelPackage/usb-net-asix
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
- DEPENDS:=+!LINUX_3_3:kmod-libphy
+ DEPENDS:=+kmod-libphy
KCONFIG:=CONFIG_USB_NET_AX8817X
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
- AUTOLOAD:=$(call AutoLoad,61,asix)
+ AUTOLOAD:=$(call AutoProbe,asix)
$(call AddDepends/usb-net)
endef
$(eval $(call KernelPackage,usb-net-asix))
+define KernelPackage/usb-net-asix-ax88179
+ TITLE:=Kernel module for USB-to-Gigabit-Ethernet Asix convertors
+ DEPENDS:=+kmod-libphy
+ KCONFIG:=CONFIG_USB_NET_AX88179_178A
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/ax88179_178a.ko
+ AUTOLOAD:=$(call AutoProbe,ax88179_178a)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-asix-ax88179/description
+ Kernel module for USB-to-Ethernet ASIX AX88179 based USB 3.0/2.0
+ to Gigabit Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,usb-net-asix-ax88179))
+
+
define KernelPackage/usb-net-hso
TITLE:=Kernel module for Option USB High Speed Mobile Devices
KCONFIG:=CONFIG_USB_HSO
FILES:= \
$(LINUX_DIR)/drivers/$(USBNET_DIR)/hso.ko
- AUTOLOAD:=$(call AutoLoad,61,hso)
+ AUTOLOAD:=$(call AutoProbe,hso)
$(call AddDepends/usb-net)
$(call AddDepends/rfkill)
endef
TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors
KCONFIG:=CONFIG_USB_KAWETH
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.ko
- AUTOLOAD:=$(call AutoLoad,61,kaweth)
+ AUTOLOAD:=$(call AutoProbe,kaweth)
$(call AddDepends/usb-net)
endef
TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
KCONFIG:=CONFIG_USB_PEGASUS
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.ko
- AUTOLOAD:=$(call AutoLoad,61,pegasus)
+ AUTOLOAD:=$(call AutoProbe,pegasus)
$(call AddDepends/usb-net)
endef
TITLE:=Kernel module for USB-to-Ethernet MCS7830 convertors
KCONFIG:=CONFIG_USB_NET_MCS7830
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/mcs7830.ko
- AUTOLOAD:=$(call AutoLoad,61,mcs7830)
+ AUTOLOAD:=$(call AutoProbe,mcs7830)
$(call AddDepends/usb-net)
endef
$(eval $(call KernelPackage,usb-net-mcs7830))
+define KernelPackage/usb-net-smsc95xx
+ TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices
+ KCONFIG:=CONFIG_USB_NET_SMSC95XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko
+ AUTOLOAD:=$(call AutoProbe,smsc95xx)
+ $(call AddDepends/usb-net, +kmod-lib-crc16)
+endef
+
+define KernelPackage/usb-net-smsc95xx/description
+ Kernel module for SMSC LAN95XX based devices
+endef
+
+$(eval $(call KernelPackage,usb-net-smsc95xx))
+
+
define KernelPackage/usb-net-dm9601-ether
TITLE:=Support for DM9601 ethernet connections
KCONFIG:=CONFIG_USB_NET_DM9601
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/dm9601.ko
- AUTOLOAD:=$(call AutoLoad,61,dm9601)
+ AUTOLOAD:=$(call AutoProbe,dm9601)
$(call AddDepends/usb-net)
endef
TITLE:=Support for cdc ethernet connections
KCONFIG:=CONFIG_USB_NET_CDCETHER
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ether.ko
- AUTOLOAD:=$(call AutoLoad,61,cdc_ether)
+ AUTOLOAD:=$(call AutoProbe,cdc_ether)
$(call AddDepends/usb-net)
endef
$(eval $(call KernelPackage,usb-net-cdc-ether))
+define KernelPackage/usb-net-cdc-eem
+ TITLE:=Support for CDC EEM connections
+ KCONFIG:=CONFIG_USB_NET_CDC_EEM
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_eem.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_eem)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-eem/description
+ Kernel support for USB CDC EEM
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-eem))
+
+
+define KernelPackage/usb-net-cdc-subset
+ TITLE:=Support for CDC Ethernet subset connections
+ KCONFIG:= \
+ CONFIG_USB_NET_CDC_SUBSET \
+ CONFIG_USB_ARMLINUX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_subset.ko
+ AUTOLOAD:=$(call AutoProbe,cdc_subset)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-subset/description
+ Kernel support for Simple USB Network Links (CDC Ethernet subset)
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-subset))
+
+
define KernelPackage/usb-net-qmi-wwan
TITLE:=QMI WWAN driver
KCONFIG:=CONFIG_USB_NET_QMI_WWAN
FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/qmi_wwan.ko
- AUTOLOAD:=$(call AutoLoad,61,qmi_wwan)
+ AUTOLOAD:=$(call AutoProbe,qmi_wwan)
$(call AddDepends/usb-net,+kmod-usb-wdm)
endef
TITLE:=Support for RNDIS connections
KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/rndis_host.ko
- AUTOLOAD:=$(call AutoLoad,62,rndis_host)
+ AUTOLOAD:=$(call AutoProbe,rndis_host)
$(call AddDepends/usb-net,+kmod-usb-net-cdc-ether)
endef
KCONFIG:=CONFIG_USB_NET_CDC_MBIM
FILES:= \
$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_mbim.ko
- AUTOLOAD:=$(call AutoLoad,62,cdc_mbim)
+ AUTOLOAD:=$(call AutoProbe,cdc_mbim)
$(call AddDepends/usb-net,+kmod-usb-wdm +kmod-usb-net-cdc-ncm)
endef
TITLE:=Support for CDC NCM connections
KCONFIG:=CONFIG_USB_NET_CDC_NCM
FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ncm.ko
- AUTOLOAD:=$(call AutoLoad,61,cdc_ncm)
+ AUTOLOAD:=$(call AutoProbe,cdc_ncm)
$(call AddDepends/usb-net)
endef
$(eval $(call KernelPackage,usb-net-cdc-ncm))
+define KernelPackage/usb-net-huawei-cdc-ncm
+ TITLE:=Support for Huawei CDC NCM connections
+ KCONFIG:=CONFIG_USB_NET_HUAWEI_CDC_NCM
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/huawei_cdc_ncm.ko
+ AUTOLOAD:=$(call AutoProbe,huawei_cdc_ncm)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm @!LINUX_3_10)
+endef
+
+define KernelPackage/usb-net-huawei-cdc-ncm/description
+ Kernel support for Huawei CDC NCM connections
+endef
+
+$(eval $(call KernelPackage,usb-net-huawei-cdc-ncm))
+
+
define KernelPackage/usb-net-sierrawireless
TITLE:=Support for Sierra Wireless devices
KCONFIG:=CONFIG_USB_SIERRA_NET
FILES:=$(LINUX_DIR)/drivers/net/usb/sierra_net.ko
- AUTOLOAD:=$(call AutoLoad,65,sierra_net)
+ AUTOLOAD:=$(call AutoProbe,sierra_net)
$(call AddDepends/usb-net)
endef
TITLE:=Apple iPhone USB Ethernet driver
KCONFIG:=CONFIG_USB_IPHETH
FILES:=$(LINUX_DIR)/drivers/net/usb/ipheth.ko
- AUTOLOAD:=$(call AutoLoad,64,ipheth)
+ AUTOLOAD:=$(call AutoProbe,ipheth)
$(call AddDepends/usb-net)
endef
$(eval $(call KernelPackage,usb-net-ipheth))
+define KernelPackage/usb-net-kalmia
+ TITLE:=Samsung Kalmia based LTE USB modem
+ KCONFIG:=CONFIG_USB_NET_KALMIA
+ FILES:=$(LINUX_DIR)/drivers/net/usb/kalmia.ko
+ AUTOLOAD:=$(call AutoProbe,kalmia)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-kalmia/description
+ Kernel support for Samsung Kalmia based LTE USB modem
+endef
+
+$(eval $(call KernelPackage,usb-net-kalmia))
+
+
define KernelPackage/usb-hid
TITLE:=Support for USB Human Input Devices
KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID CONFIG_USB_HIDDEV=y
FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko
- AUTOLOAD:=$(call AutoLoad,70,usbhid)
+ AUTOLOAD:=$(call AutoProbe,usbhid)
$(call AddDepends/usb)
- $(call AddDepends/hid)
+ $(call AddDepends/hid,+kmod-hid-generic)
$(call AddDepends/input,+kmod-input-evdev)
endef
TITLE:=USB Yealink VOIP phone
KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
- AUTOLOAD:=$(call AutoLoad,70,yealink)
+ AUTOLOAD:=$(call AutoProbe,yealink)
$(call AddDepends/usb)
$(call AddDepends/input,+kmod-input-evdev)
endef
TITLE:=Support for CM109 device
KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko
- AUTOLOAD:=$(call AutoLoad,70,cm109)
+ AUTOLOAD:=$(call AutoProbe,cm109)
$(call AddDepends/usb)
$(call AddDepends/input,+kmod-input-evdev)
endef
KCONFIG:= \
CONFIG_USBIP_CORE \
CONFIG_USBIP_DEBUG=n
- FILES:=$(LINUX_DIR)/drivers/staging/usbip/usbip-core.ko
- AUTOLOAD:=$(call AutoLoad,90,usbip-core)
+ FILES:= \
+ $(LINUX_DIR)/drivers/staging/usbip/usbip-core.ko@lt3.17 \
+ $(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko@ge3.17
+ AUTOLOAD:=$(call AutoProbe,usbip-core)
$(call AddDepends/usb)
endef
TITLE := USB-over-IP client driver
DEPENDS := +kmod-usbip
KCONFIG := CONFIG_USBIP_VHCI_HCD
- FILES := $(LINUX_DIR)/drivers/staging/usbip/vhci-hcd.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD := $(call AutoLoad,95,vhci-hcd)
+ FILES := \
+ $(LINUX_DIR)/drivers/staging/usbip/vhci-hcd.ko@lt3.17 \
+ $(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko@ge3.17
+ AUTOLOAD := $(call AutoProbe,vhci-hcd)
$(call AddDepends/usb)
endef
TITLE := USB-over-IP host driver
DEPENDS := +kmod-usbip
KCONFIG := CONFIG_USBIP_HOST
- FILES := $(LINUX_DIR)/drivers/staging/usbip/usbip-host.ko
- AUTOLOAD := $(call AutoLoad,95,usbip-host)
+ FILES := \
+ $(LINUX_DIR)/drivers/staging/usbip/usbip-host.ko@lt3.17 \
+ $(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko@ge3.17
+ AUTOLOAD := $(call AutoProbe,usbip-host)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usbip-server))
-define KernelPackage/usb-chipidea
+define KernelPackage/usb-chipidea-imx
TITLE:=Support for ChipIdea controllers
- DEPENDS:=+kmod-usb2
+ DEPENDS:=@TARGET_imx6||TARGET_mxs +kmod-usb2 +USB_GADGET_SUPPORT:kmod-usb-gadget
KCONFIG:=\
CONFIG_USB_CHIPIDEA \
CONFIG_USB_CHIPIDEA_HOST=y \
- CONFIG_USB_CHIPIDEA_UDC=n \
+ CONFIG_USB_CHIPIDEA_UDC=y \
CONFIG_USB_CHIPIDEA_DEBUG=y
FILES:=\
$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
- $(if $(CONFIG_OF_DEVICE),$(LINUX_DIR)/drivers/usb/chipidea/ci13xxx_imx.ko) \
- $(if $(CONFIG_OF_DEVICE),$(LINUX_DIR)/drivers/usb/chipidea/usbmisc_imx$(if $(call kernel_patchver_le,3.9),6q).ko)
- AUTOLOAD:=$(call AutoLoad,51,ci_hdrc $(if $(CONFIG_OF_DEVICE),ci13xxx_imx usbmisc_imx$(if $(call kernel_patchver_le,3.9),6q)),1)
+ $(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_imx.ko) \
+ $(if $(CONFIG_OF),$(LINUX_DIR)/drivers/usb/chipidea/usbmisc_imx.ko)
+ AUTOLOAD:=$(call AutoLoad,51,ci_hdrc $(if $(CONFIG_OF),ci_hdrc_imx usbmisc_imx),1)
$(call AddDepends/usb)
endef
-
-define KernelPackage/usb-chipidea/description
+
+define KernelPackage/usb-chipidea-imx/description
Kernel support for USB ChipIdea controllers
endef
-$(eval $(call KernelPackage,usb-chipidea,1))
+$(eval $(call KernelPackage,usb-chipidea-imx,1))
define KernelPackage/usb-mxs-phy
TITLE:=Support for Freescale MXS USB PHY
- DEPENDS:=@TARGET_imx6
+ DEPENDS:=@TARGET_imx6||TARGET_mxs +TARGET_mxs:kmod-usb-chipidea-imx
KCONFIG:=CONFIG_USB_MXS_PHY
FILES:=\
$(LINUX_DIR)/drivers/usb/phy/phy-mxs-usb.ko
KCONFIG:=CONFIG_USB_MON
$(call AddDepends/usb)
FILES:=$(LINUX_DIR)/drivers/usb/mon/usbmon.ko
- AUTOLOAD:=$(call AutoLoad,60,usbmon)
+ AUTOLOAD:=$(call AutoProbe,usbmon)
endef
define KernelPackage/usbmon/description
endef
$(eval $(call KernelPackage,usbmon))
+
+XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,xhci-hcd xhci-pci xhci-plat-hcd))
+XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
+
+define KernelPackage/usb3
+ TITLE:=Support for USB3 controllers
+ DEPENDS:=+TARGET_omap:kmod-usb-phy-omap-usb3
+ KCONFIG:= \
+ CONFIG_USB_XHCI_HCD \
+ CONFIG_USB_XHCI_PCI \
+ CONFIG_USB_XHCI_PLATFORM \
+ CONFIG_USB_XHCI_MVEBU=y \
+ CONFIG_USB_XHCI_HCD_DEBUGGING=n
+ FILES:= \
+ $(XHCI_FILES)
+ AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb3/description
+ Kernel support for USB3 (XHCI) controllers
+endef
+
+$(eval $(call KernelPackage,usb3))