#
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
WATCHDOG_DIR:=watchdog
+define KernelPackage/6lowpan-iphc
+ USBMENU:=$(OTHER_MENU)
+ TITLE:=6lowpan shared code
+ DEPENDS:=@!LINUX_3_10
+ KCONFIG:=CONFIG_6LOWPAN_IPHC
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/net/ieee802154/6lowpan_iphc.ko
+ AUTOLOAD:=$(call Autoprobe,6lowpan_iphc)
+endef
+
+define KernelPackage/6lowpan-iphc/description
+ Shared 6lowpan code for IEEE 802.15.4 and Bluetooth.
+endef
+
+$(eval $(call KernelPackage,6lowpan-iphc))
+
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +!LINUX_3_10:kmod-6lowpan-iphc +kmod-lib-crc16 +kmod-hid
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BT_HCIUART_H4 \
CONFIG_BT_HIDP \
CONFIG_HID_SUPPORT=y
- $(call AddDepends/crc16)
- $(call AddDepends/hid)
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
- AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
+ AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
define KernelPackage/bluetooth/description
$(eval $(call KernelPackage,bluetooth))
+define KernelPackage/bluetooth_6lowpan
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Bluetooth 6LoWPAN support
+ DEPENDS:=+kmod-bluetooth @!LINUX_3_10 @!LINUX_3_14
+ KCONFIG:= \
+ CONFIG_6LOWPAN=m \
+ CONFIG_BT_6LOWPAN=m
+ FILES:= \
+ $(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko \
+ $(LINUX_DIR)/net/6lowpan/6lowpan.ko
+ AUTOLOAD:=$(call AutoProbe,bluetooth)
+endef
+
+define KernelPackage/bluetooth_6lowpan/description
+ Kernel support for 6LoWPAN over Bluetooth Low Energy devices
+endef
+
+$(eval $(call KernelPackage,bluetooth_6lowpan))
+
+
define KernelPackage/bluetooth-hci-h4p
SUBMENU:=$(OTHER_MENU)
TITLE:=HCI driver with H4 Nokia extensions
DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
KCONFIG:=CONFIG_BT_HCIH4P
FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
- AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
+ AUTOLOAD:=$(call AutoProbe,hci_h4p)
endef
define KernelPackage/bluetooth-hci-h4p/description
- HCI driver with H4 Nokia extensions
+ HCI driver with H4 Nokia extensions
endef
$(eval $(call KernelPackage,bluetooth-hci-h4p))
KCONFIG:=CONFIG_EEPROM_AT24
DEPENDS:=+kmod-i2c-core
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
- AUTOLOAD:=$(call AutoLoad,60,at24)
+ AUTOLOAD:=$(call AutoProbe,at24)
endef
define KernelPackage/eeprom-at24/description
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
- AUTOLOAD:=$(call AutoLoad,61,at25)
+ AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/eeprom-at25/description
endef
define KernelPackage/gpio-dev/description
- Kernel module to allows control of GPIO pins using a character device.
+ Kernel module to allows control of GPIO pins using a character device.
endef
$(eval $(call KernelPackage,gpio-dev))
endef
define KernelPackage/gpio-mcp23s08/description
- Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
+ Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
endef
$(eval $(call KernelPackage,gpio-mcp23s08))
TITLE:=NXP 74HC164 GPIO expander support
KCONFIG:=CONFIG_GPIO_NXP_74HC164
FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
+ AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
endef
define KernelPackage/gpio-nxp-74hc164/description
- Kernel module for NXP 74HC164 GPIO expander
+ Kernel module for NXP 74HC164 GPIO expander
endef
$(eval $(call KernelPackage,gpio-nxp-74hc164))
+define KernelPackage/gpio-pca953x
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
+ KCONFIG:=CONFIG_GPIO_PCA953X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
+ AUTOLOAD:=$(call AutoLoad,55,gpio-pca953x)
+endef
+
+define KernelPackage/gpio-pca953x/description
+ Kernel module for MAX731{0,2,3,5}, PCA6107, PCA953{4-9}, PCA955{4-7},
+ PCA957{4,5} and TCA64{08,16} I2C GPIO expanders
+endef
+
+$(eval $(call KernelPackage,gpio-pca953x))
+
define KernelPackage/gpio-pcf857x
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
endef
define KernelPackage/gpio-pcf857x/description
- Kernel module for PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders
+ Kernel module for PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders
endef
$(eval $(call KernelPackage,gpio-pcf857x))
+define KernelPackage/iio-core
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Industrial IO core
+ KCONFIG:= \
+ CONFIG_IIO \
+ CONFIG_IIO_BUFFER=y \
+ CONFIG_IIO_KFIFO_BUF \
+ CONFIG_IIO_TRIGGER=y \
+ CONFIG_IIO_TRIGGERED_BUFFER
+ FILES:= \
+ $(LINUX_DIR)/drivers/iio/industrialio.ko \
+ $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko) \
+ $(LINUX_DIR)/drivers/iio/kfifo_buf.ko
+ AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
+endef
+
+define KernelPackage/iio-core/description
+ The industrial I/O subsystem provides a unified framework for
+ drivers for many different types of embedded sensors using a
+ number of different physical interfaces (i2c, spi, etc)
+endef
+
+$(eval $(call KernelPackage,iio-core))
+
+
+define KernelPackage/iio-ad799x
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=kmod-i2c-core kmod-iio-core
+ TITLE:=Analog Devices AD799x ADC driver
+ KCONFIG:= \
+ CONFIG_AD799X_RING_BUFFER=y \
+ CONFIG_AD799X
+ FILES:= \
+ $(LINUX_DIR)/drivers/staging/iio/adc/ad799x.ko@lt3.16 \
+ $(LINUX_DIR)/drivers/iio/adc/ad799x.ko@ge3.16
+ AUTOLOAD:=$(call AutoLoad,56,ad799x)
+endef
+
+define KernelPackage/iio-ad799x/description
+ support for Analog Devices:
+ ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
+ i2c analog to digital converters (ADC).
+endef
+
+$(eval $(call KernelPackage,iio-ad799x))
+
+
+define KernelPackage/iio-dht11
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
+ TITLE:=DHT11 (and compatible) humidity and temperature sensors
+ KCONFIG:= \
+ CONFIG_DHT11
+ FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
+ AUTOLOAD:=$(call AutoLoad,56,dht11)
+endef
+
+define KernelPackage/iio-dht11/description
+ support for DHT11 and DHT22 digitial humidity and temperature sensors
+ attached at GPIO lines. You will need a custom device tree file to
+ specify the GPIO line to use.
+endef
+
+$(eval $(call KernelPackage,iio-dht11))
+
+
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
CONFIG_MMC_BLOCK_BOUNCE=y \
- CONFIG_MMC_SDHCI=n \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
+ AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
+define KernelPackage/sdhci
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Secure Digital Host Controller Interface support
+ DEPENDS:=+kmod-mmc
+ KCONFIG:= \
+ CONFIG_MMC_SDHCI \
+ CONFIG_MMC_SDHCI_PLTFM \
+ CONFIG_MMC_SDHCI_PCI=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/mmc/host/sdhci.ko \
+ $(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko
+
+ AUTOLOAD:=$(call AutoProbe,sdhci sdhci-pltfm,1)
+endef
+
+define KernelPackage/sdhci/description
+ Kernel support for SDHCI Hosts
+endef
+
+$(eval $(call KernelPackage,sdhci))
+
+
define KernelPackage/oprofile
SUBMENU:=$(OTHER_MENU)
TITLE:=OProfile profiling support
endef
define KernelPackage/oprofile/description
- Kernel module for support for oprofile system profiling.
+ Kernel module for support for oprofile system profiling
endef
$(eval $(call KernelPackage,oprofile))
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
+ DEPENDS:=@USE_RFKILL +kmod-input-core
KCONFIG:= \
CONFIG_RFKILL \
CONFIG_RFKILL_INPUT=y \
FILES:= \
$(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
- $(call SetDepends/rfkill,+kmod-input-core)
endef
define KernelPackage/rfkill/description
- Say Y here if you want to have control over RF switches
- found on many WiFi and Bluetooth cards.
+ Say Y here if you want to have control over RF switches
+ found on many WiFi and Bluetooth cards
endef
$(eval $(call KernelPackage,rfkill))
CONFIG_SSB_SPROM=y \
CONFIG_SSB_SILENT=y
FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
- AUTOLOAD:=$(call AutoLoad,29,ssb)
+ AUTOLOAD:=$(call AutoLoad,18,ssb,1)
endef
define KernelPackage/ssb/description
- Silicon Sonics Backplane glue code.
+ Silicon Sonics Backplane glue code.
endef
$(eval $(call KernelPackage,ssb))
CONFIG_BCMA_BLOCKIO=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_HOST_SOC=n \
CONFIG_BCMA_DRIVER_MIPS=n \
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
CONFIG_BCMA_DRIVER_GMAC_CMN=n \
endef
define KernelPackage/bcma/description
- Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture
endef
$(eval $(call KernelPackage,bcma))
endef
define KernelPackage/wdt-omap/description
- Kernel module for TI omap watchdog timer.
+ Kernel module for TI omap watchdog timer
endef
$(eval $(call KernelPackage,wdt-omap))
endef
define KernelPackage/wdt-orion/description
- Kernel module for Marvell Orion, Kirkwood and Armada XP/370 watchdog timer.
+ Kernel module for Marvell Orion, Kirkwood and Armada XP/370 watchdog timer
endef
$(eval $(call KernelPackage,wdt-orion))
endef
define KernelPackage/booke-wdt/description
- Kernel module for PowerPC Book-E Watchdog Timer.
+ Kernel module for PowerPC Book-E Watchdog Timer
endef
$(eval $(call KernelPackage,booke-wdt))
-define KernelPackage/pwm
+define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM generic API
- KCONFIG:=CONFIG_GENERIC_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
- AUTOLOAD:=$(call AutoLoad,50,pwm)
+ TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
+ $(call AddDepends/rtc)
+ DEPENDS+=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1307
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1307)
endef
-define KernelPackage/pwm/description
- Kernel module that implement a generic PWM API
+define KernelPackage/rtc-ds1307/description
+ Kernel module for Dallas/Maxim DS1307/DS1337/DS1338/DS1340/DS1388/DS3231,
+ Epson RX-8025 and various other compatible RTC chips connected via I2C.
endef
-$(eval $(call KernelPackage,pwm))
+$(eval $(call KernelPackage,rtc-ds1307))
-define KernelPackage/pwm-gpio
+define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM over GPIO
- DEPENDS:=+kmod-pwm
- KCONFIG:=CONFIG_GPIO_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
- AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
+ TITLE:=Dallas/Maxim DS1672 RTC support
+ $(call AddDepends/rtc)
+ DEPENDS+=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1672
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1672)
endef
-define KernelPackage/pwm-gpio/description
- Kernel module to models a single-channel PWM device using a timer and a GPIO pin
+define KernelPackage/rtc-ds1672/description
+ Kernel module for Dallas/Maxim DS1672 RTC.
endef
-$(eval $(call KernelPackage,pwm-gpio))
+$(eval $(call KernelPackage,rtc-ds1672))
define KernelPackage/rtc-isl1208
DEPENDS+=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_ISL1208
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-isl1208)
+ AUTOLOAD:=$(call AutoProbe,rtc-isl1208)
endef
define KernelPackage/rtc-isl1208/description
DEPENDS+=@TARGET_kirkwood||TARGET_orion||TARGET_mvebu
KCONFIG:=CONFIG_RTC_DRV_MV
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
+ AUTOLOAD:=$(call AutoProbe,rtc-mv)
endef
define KernelPackage/rtc-marvell/description
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- $(call AddDepends/rtc)
+ $(call AddDepends/rtc,+kmod-i2c-core)
KCONFIG:=CONFIG_RTC_DRV_PCF8563
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf8563)
endef
define KernelPackage/rtc-pcf8563/description
$(call AddDepends/rtc)
KCONFIG:=CONFIG_RTC_DRV_PCF2123
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf2123)
endef
define KernelPackage/rtc-pcf2123/description
- Kernel module for Philips PCF2123 RTC chip.
+ Kernel module for Philips PCF2123 RTC chip
endef
$(eval $(call KernelPackage,rtc-pcf2123))
$(call AddDepends/rtc,+kmod-i2c-core)
KCONFIG:=CONFIG_RTC_DRV_PT7C4338
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
+ AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
endef
define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip.
+ Kernel module for Pericom PT7C4338 i2c RTC chip
endef
$(eval $(call KernelPackage,rtc-pt7c4338))
endef
define KernelPackage/mtdtests/description
- Kernel modules for MTD subsystem/driver testing.
+ Kernel modules for MTD subsystem/driver testing
endef
$(eval $(call KernelPackage,mtdtests))
endef
define KernelPackage/nand/description
- Kernel module for NAND support.
+ Kernel module for NAND support
endef
$(eval $(call KernelPackage,nand))
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
- FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250$(if $(call kernel_patchver_ge,3.7),$(if $(call kernel_patchver_le,3.8),_core)).ko
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
endef
define KernelPackage/serial-8250/description
- Kernel module for 8250 UART based serial ports.
+ Kernel module for 8250 UART based serial ports
endef
$(eval $(call KernelPackage,serial-8250))
FILES:= \
$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
+ $(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-spi)
endef
define KernelPackage/regmap/description
- Generic register map support
+ Generic register map support
endef
$(eval $(call KernelPackage,regmap))
endef
define KernelPackage/ikconfig/description
- Kernel configuration via /proc/config.gz
+ Kernel configuration via /proc/config.gz
endef
$(eval $(call KernelPackage,ikconfig))
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=@!LINUX_3_3 +kmod-lib-lzo
+ DEPENDS:=+kmod-lib-lzo +(!LINUX_3_10&&!LINUX_3_14):kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
- CONFIG_ZRAM_DEBUG=n
+ CONFIG_ZRAM_DEBUG=n \
+ CONFIG_PGTABLE_MAPPING=n \
+ CONFIG_ZRAM_LZ4_COMPRESS=y
FILES:= \
- $(LINUX_DIR)/drivers/staging/zsmalloc/zsmalloc.ko \
- $(LINUX_DIR)/drivers/staging/zram/zram.ko
+ $(LINUX_DIR)/drivers/staging/zsmalloc/zsmalloc.ko@lt3.14 \
+ $(LINUX_DIR)/drivers/staging/zram/zram.ko@lt3.14 \
+ $(LINUX_DIR)/mm/zsmalloc.ko@ge3.14 \
+ $(LINUX_DIR)/drivers/block/zram/zram.ko@ge3.14
AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram)
endef
DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu +kmod-mmc
KCONFIG:=CONFIG_MMC_MVSDIO
FILES:=$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
- AUTOLOAD:=$(call AutoLoad,91,mvsdio)
+ AUTOLOAD:=$(call AutoProbe,mvsdio)
endef
-define KernelPacakge/mvsdio/description
- Kernel support for the Marvell SDIO controller
+define KernelPackage/mvsdio/description
+ Kernel support for the Marvell SDIO controller
endef
$(eval $(call KernelPackage,mvsdio))
AUTOLOAD:=$(call AutoLoad,17,pps_core,1)
endef
-define KernelPacakge/pps/description
- PPS (Pulse Per Second) is a special pulse provided by some GPS
- antennae. Userland can use it to get a high-precision time
- reference.
+define KernelPackage/pps/description
+ PPS (Pulse Per Second) is a special pulse provided by some GPS
+ antennae. Userland can use it to get a high-precision time
+ reference.
endef
$(eval $(call KernelPackage,pps))
+define KernelPackage/pps-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PPS client using GPIO
+ DEPENDS:=+kmod-pps
+ KCONFIG:=CONFIG_PPS_CLIENT_GPIO
+ FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-gpio.ko
+ AUTOLOAD:=$(call AutoLoad,18,pps-gpio,1)
+endef
+
+define KernelPackage/pps-gpio/description
+ Support for a PPS source using GPIO. To be useful you must
+ also register a platform device specifying the GPIO pin and
+ other options, usually in your board setup.
+endef
+
+$(eval $(call KernelPackage,pps-gpio))
+
+
define KernelPackage/ptp
SUBMENU:=$(OTHER_MENU)
TITLE:=PTP clock support
AUTOLOAD:=$(call AutoLoad,18,ptp,1)
endef
-define KernelPacakge/ptp/description
- The IEEE 1588 standard defines a method to precisely
- synchronize distributed clocks over Ethernet networks.
+define KernelPackage/ptp/description
+ The IEEE 1588 standard defines a method to precisely
+ synchronize distributed clocks over Ethernet networks.
endef
$(eval $(call KernelPackage,ptp))
DEPENDS:=@TARGET_mpc85xx +kmod-gianfar +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoLoad,51,gianfar_ptp)
+ AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
endef
-define KernelPacakge/ptp-gianfar/description
- Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers.
+define KernelPackage/ptp-gianfar/description
+ Kernel module for IEEE 1588 support for Freescale
+ Gianfar Ethernet drivers
endef
$(eval $(call KernelPackage,ptp-gianfar))
+
define KernelPackage/random-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Hardware Random Number Generator Core support
KCONFIG:=CONFIG_HW_RANDOM
FILES:=$(LINUX_DIR)/drivers/char/hw_random/rng-core.ko
- AUTOLOAD:=$(call AutoLoad,10,rng-core)
endef
define KernelPackage/random-core/description
- Kernel module for the HW random number generator core infrastructure
+ Kernel module for the HW random number generator core infrastructure
endef
$(eval $(call KernelPackage,random-core))
+
+
+define KernelPackage/thermal
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic Thermal sysfs driver
+ DEPENDS:=+kmod-hwmon-core
+ HIDDEN:=1
+ KCONFIG:= \
+ CONFIG_THERMAL \
+ CONFIG_THERMAL_OF=y \
+ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
+ CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
+ CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_GOV_FAIR_SHARE=n \
+ CONFIG_THERMAL_GOV_STEP_WISE=y \
+ CONFIG_THERMAL_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_HWMON=y \
+ CONFIG_THERMAL_EMULATION=n
+ FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
+ AUTOLOAD:=$(call AutoProbe,thermal_sys)
+endef
+
+define KernelPackage/thermal/description
+ Generic Thermal Sysfs driver offers a generic mechanism for thermal
+ management. Usually it's made up of one or more thermal zone and cooling
+ device.
+endef
+
+$(eval $(call KernelPackage,thermal))
+
+
+define KernelPackage/thermal-armada
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Armada 370/XP thermal management
+ DEPENDS:=@TARGET_mvebu +kmod-thermal
+ KCONFIG:=CONFIG_ARMADA_THERMAL
+ FILES:=$(LINUX_DIR)/drivers/thermal/armada_thermal.ko
+ AUTOLOAD:=$(call AutoProbe,armada_thermal)
+endef
+
+define KernelPackage/thermal-armada/description
+ Enable this module if you want to have support for thermal management
+ controller present in Armada 370 and Armada XP SoC.
+endef
+
+$(eval $(call KernelPackage,thermal-armada))
+
+
+define KernelPackage/thermal-imx
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Temperature sensor driver for Freescale i.MX SoCs
+ DEPENDS:=@TARGET_imx6 +kmod-thermal
+ KCONFIG:= \
+ CONFIG_CPU_THERMAL=y \
+ CONFIG_IMX_THERMAL
+ FILES:=$(LINUX_DIR)/drivers/thermal/imx_thermal.ko
+ AUTOLOAD:=$(call AutoProbe,imx_thermal)
+endef
+
+define KernelPackage/thermal-imx/description
+ Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
+ It supports one critical trip point and one passive trip point. The
+ cpufreq is used as the cooling device to throttle CPUs when the
+ passive trip is crossed.
+endef
+
+$(eval $(call KernelPackage,thermal-imx))
+
+
+define KernelPackage/thermal-kirkwood
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Temperature sensor on Marvell Kirkwood SoCs
+ DEPENDS:=@TARGET_kirkwood +kmod-thermal
+ KCONFIG:=CONFIG_KIRKWOOD_THERMAL
+ FILES:=$(LINUX_DIR)/drivers/thermal/kirkwood_thermal.ko
+ AUTOLOAD:=$(call AutoProbe,kirkwood_thermal)
+endef
+
+define KernelPackage/thermal-kirkwood/description
+ Support for the Kirkwood thermal sensor driver into the Linux thermal
+ framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+endef
+
+$(eval $(call KernelPackage,thermal-kirkwood))
+
+
+define KernelPackage/gpio-beeper
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO beeper support
+ KCONFIG:= \
+ CONFIG_INPUT_MISC=y \
+ CONFIG_INPUT_GPIO_BEEPER
+ FILES:= \
+ $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
+ AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/gpio-beeper/description
+ This enables playing beeps through an GPIO-connected buzzer
+endef
+
+$(eval $(call KernelPackage,gpio-beeper))