json_select "$1"
}
-_ucidef_set_interface() {
- local name="$1"
- local iface="$2"
- local proto="$3"
+ucidef_set_interface() {
+ local network=$1; shift
- json_select_object "$name"
- json_add_string ifname "$iface"
-
- if ! json_is_a protocol string || [ -n "$proto" ]; then
- case "$proto" in
- static|dhcp|none|pppoe) : ;;
- *)
- case "$name" in
- lan) proto="static" ;;
- wan) proto="dhcp" ;;
- *) proto="none" ;;
- esac
- ;;
- esac
+ [ -z "$network" ] && return
+
+ json_select_object network
+ json_select_object "$network"
+
+ while [ -n "$1" ]; do
+ local opt=$1; shift
+ local val=$1; shift
+
+ [ -n "$opt" -a -n "$val" ] || break
- json_add_string protocol "$proto"
+ json_add_string "$opt" "$val"
+ done
+
+ if ! json_is_a protocol string; then
+ case "$network" in
+ lan) json_add_string protocol static ;;
+ wan) json_add_string protocol dhcp ;;
+ *) json_add_string protocol none ;;
+ esac
fi
json_select ..
+ json_select ..
}
ucidef_set_board_id() {
}
ucidef_set_interface_lan() {
- json_select_object network
- _ucidef_set_interface lan "$@"
- json_select ..
+ ucidef_set_interface "lan" ifname "$1" protocol "${2:-static}"
}
ucidef_set_interface_wan() {
- json_select_object network
- _ucidef_set_interface wan "$@"
- json_select ..
+ ucidef_set_interface "wan" ifname "$1" protocol "${2:-dhcp}"
}
ucidef_set_interfaces_lan_wan() {
local lan_if="$1"
local wan_if="$2"
- json_select_object network
- _ucidef_set_interface lan "$lan_if"
- _ucidef_set_interface wan "$wan_if"
- json_select ..
-}
-
-ucidef_set_interface_raw() {
- json_select_object network
- _ucidef_set_interface "$@"
- json_select ..
+ ucidef_set_interface_lan "$lan_if"
+ ucidef_set_interface_wan "$wan_if"
}
_ucidef_add_switch_port() {
json_select ..
json_select ..
- if [ $n_vlan -gt $n_cpu -o ${need_tag:-0} -eq 1 ]; then
+ if [ ${need_tag:-0} -eq 1 -o ${want_untag:-0} -ne 1 ]; then
num="${num}t"
device="${device}.${index}"
fi
devices="${devices:+$devices }$device"
fi
json_select ..
-
- _ucidef_set_interface "$role" "$devices"
json_select ..
+
+ ucidef_set_interface "$role" ifname "$devices"
done
}
local network="$1"
local macaddr="$2"
- json_select_object network
-
- json_select "$network"
- [ $? -eq 0 ] || {
- json_select ..
- return
- }
-
- json_add_string macaddr "$macaddr"
- json_select ..
-
- json_select ..
+ ucidef_set_interface "$network" macaddr "$macaddr"
}
ucidef_add_atm_bridge() {
local vci="$2"
local encaps="$3"
local payload="$4"
+ local nameprefix="$5"
json_select_object dsl
json_select_object atmbridge
json_add_int vci "$vci"
json_add_string encaps "$encaps"
json_add_string payload "$payload"
+ json_add_string nameprefix "$nameprefix"
json_select ..
json_select ..
}
json_select ..
}
-ucidef_set_led_netdev() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local dev="$4"
- local mode="${5:-link tx rx}"
-
- json_select_object led
-
- json_select_object "$1"
- json_add_string name "$name"
- json_add_string type netdev
- json_add_string sysfs "$sysfs"
- json_add_string device "$dev"
- json_add_string mode "$mode"
- json_select ..
-
- json_select ..
+ucidef_set_led_ataport() {
+ _ucidef_set_led_trigger "$1" "$2" "$3" ata"$4"
}
-ucidef_set_led_usbdev() {
+_ucidef_set_led_common() {
local cfg="led_$1"
local name="$2"
local sysfs="$3"
- local dev="$4"
json_select_object led
json_select_object "$1"
json_add_string name "$name"
- json_add_string type usb
json_add_string sysfs "$sysfs"
- json_add_string device "$dev"
- json_select ..
-
- json_select ..
}
-ucidef_set_led_usbport() {
- local obj="$1"
- local name="$2"
- local sysfs="$3"
- shift
- shift
- shift
+ucidef_set_led_default() {
+ local default="$4"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$obj"
- json_add_string name "$name"
- json_add_string type usbport
- json_add_string sysfs "$sysfs"
- json_select_array ports
- for port in "$@"; do
- json_add_string port "$port"
- done
- json_select ..
+ json_add_string default "$default"
json_select ..
json_select ..
}
-ucidef_set_led_wlan() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local trigger="$4"
+ucidef_set_led_gpio() {
+ local gpio="$4"
+ local inverted="$5"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$1"
- json_add_string name "$name"
- json_add_string type trigger
- json_add_string sysfs "$sysfs"
json_add_string trigger "$trigger"
+ json_add_string type gpio
+ json_add_int gpio "$gpio"
+ json_add_boolean inverted "$inverted"
json_select ..
json_select ..
}
-ucidef_set_led_switch() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local trigger="$4"
- local port_mask="$5"
- local speed_mask="$6"
+ucidef_set_led_ide() {
+ _ucidef_set_led_trigger "$1" "$2" "$3" ide-disk
+}
- json_select_object led
+ucidef_set_led_netdev() {
+ local dev="$4"
+ local mode="${5:-link tx rx}"
- json_select_object "$1"
- json_add_string name "$name"
- json_add_string type switch
- json_add_string sysfs "$sysfs"
- json_add_string trigger "$trigger"
- json_add_string port_mask "$port_mask"
- json_add_string speed_mask "$speed_mask"
+ _ucidef_set_led_common "$1" "$2" "$3"
+
+ json_add_string type netdev
+ json_add_string device "$dev"
+ json_add_string mode "$mode"
json_select ..
json_select ..
}
+ucidef_set_led_oneshot() {
+ _ucidef_set_led_timer $1 $2 $3 "oneshot" $4 $5
+}
+
ucidef_set_led_portstate() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
local port_state="$4"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$1"
- json_add_string name "$name"
- json_add_string type portstate
- json_add_string sysfs "$sysfs"
json_add_string trigger port_state
+ json_add_string type portstate
json_add_string port_state "$port_state"
json_select ..
json_select ..
}
-ucidef_set_led_default() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local default="$4"
+ucidef_set_led_rssi() {
+ local iface="$4"
+ local minq="$5"
+ local maxq="$6"
+ local offset="${7:-0}"
+ local factor="${8:-1}"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$1"
+ json_add_string type rssi
json_add_string name "$name"
- json_add_string sysfs "$sysfs"
- json_add_string default "$default"
+ json_add_string iface "$iface"
+ json_add_string minq "$minq"
+ json_add_string maxq "$maxq"
+ json_add_string offset "$offset"
+ json_add_string factor "$factor"
json_select ..
json_select ..
}
-ucidef_set_led_gpio() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local gpio="$4"
- local inverted="$5"
+ucidef_set_led_switch() {
+ local trigger_name="$4"
+ local port_mask="$5"
+ local speed_mask="$6"
+ local mode="$7"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$1"
- json_add_string type gpio
- json_add_string name "$name"
- json_add_string sysfs "$sysfs"
- json_add_string trigger "$trigger"
- json_add_int gpio "$gpio"
- json_add_boolean inverted "$inverted"
+ json_add_string trigger "$trigger_name"
+ json_add_string type switch
+ json_add_string mode "$mode"
+ json_add_string port_mask "$port_mask"
+ json_add_string speed_mask "$speed_mask"
json_select ..
json_select ..
}
-ucidef_set_led_ide() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
+_ucidef_set_led_timer() {
+ local trigger_name="$4"
+ local delayon="$5"
+ local delayoff="$6"
- json_select_object led
+ _ucidef_set_led_common "$1" "$2" "$3"
- json_select_object "$1"
- json_add_string name "$name"
- json_add_string sysfs "$sysfs"
- json_add_string trigger ide-disk
+ json_add_string trigger "$trigger_name"
+ json_add_int delayon "$delayon"
+ json_add_int delayoff "$delayoff"
json_select ..
json_select ..
}
-__ucidef_set_led_timer() {
- local cfg="led_$1"
- local name="$2"
- local sysfs="$3"
- local trigger="$4"
- local delayon="$5"
- local delayoff="$6"
+ucidef_set_led_timer() {
+ _ucidef_set_led_timer $1 $2 $3 "timer" $4 $5
+}
- json_select_object led
+_ucidef_set_led_trigger() {
+ local trigger_name="$4"
- json_select_object "$1"
- json_add_string type "$trigger"
- json_add_string name "$name"
- json_add_string sysfs "$sysfs"
- json_add_int delayon "$delayon"
- json_add_int delayoff "$delayoff"
+ _ucidef_set_led_common "$1" "$2" "$3"
+
+ json_add_string trigger "$trigger_name"
json_select ..
json_select ..
}
-ucidef_set_led_oneshot() {
- __ucidef_set_led_timer $1 $2 $3 "oneshot" $4 $5
+ucidef_set_led_usbdev() {
+ local dev="$4"
+
+ _ucidef_set_led_common "$1" "$2" "$3"
+
+ json_add_string type usb
+ json_add_string device "$dev"
+ json_select ..
+
+ json_select ..
}
-ucidef_set_led_timer() {
- __ucidef_set_led_timer $1 $2 $3 "timer" $4 $5
+ucidef_set_led_usbhost() {
+ _ucidef_set_led_trigger "$1" "$2" "$3" usb-host
}
-ucidef_set_led_rssi() {
- local cfg="led_$1"
+ucidef_set_led_usbport() {
+ local obj="$1"
local name="$2"
local sysfs="$3"
- local iface="$4"
- local minq="$5"
- local maxq="$6"
- local offset="$7"
- local factor="$8"
+ shift
+ shift
+ shift
- json_select_object led
+ _ucidef_set_led_common "$obj" "$name" "$sysfs"
- json_select_object "$1"
- json_add_string type rssi
- json_add_string name "$name"
- json_add_string iface "$iface"
- json_add_string sysfs "$sysfs"
- json_add_string minq "$minq"
- json_add_string maxq "$maxq"
- json_add_string offset "$offset"
- json_add_string factor "$factor"
+ json_add_string type usbport
+ json_select_array ports
+ for port in "$@"; do
+ json_add_string port "$port"
+ done
+ json_select ..
json_select ..
json_select ..
}
+ucidef_set_led_wlan() {
+ _ucidef_set_led_trigger "$1" "$2" "$3" "$4"
+}
+
ucidef_set_rssimon() {
local dev="$1"
local refresh="$2"
json_select ..
json_select ..
-
}
ucidef_add_gpio_switch() {
projects / librecmc / librecmc.git / blobdiff