. /usr/share/libubox/jshn.sh
-[ -f $CFG ] || exit 1
+[ -s $CFG ] || /bin/board_detect || exit 1
+[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
generate_static_network() {
uci -q batch <<-EOF
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
+
+ if json_is_a dsl object; then
+ json_select dsl
+ if json_is_a atmbridge object; then
+ json_select atmbridge
+ local vpi vci encaps payload
+ json_get_vars vpi vci encaps payload
+ uci -q batch <<-EOF
+ delete network.atm
+ set network.atm='atm-bridge'
+ set network.atm.vpi='$vpi'
+ set network.atm.vci='$vci'
+ set network.atm.encaps='$encaps'
+ set network.atm.payload='$payload'
+ EOF
+ json_select ..
+ fi
+
+ if json_is_a modem object; then
+ json_select modem
+ local type annex firmware tone xfer_mode
+ json_get_vars type annex firmware tone xfer_mode
+ uci -q batch <<-EOF
+ delete network.dsl
+ set network.dsl='dsl'
+ set network.dsl.annex='$annex'
+ set network.dsl.firmware='$firmware'
+ set network.dsl.tone='$tone'
+ set network.dsl.xfer_mode='$xfer_mode'
+ EOF
+ json_select ..
+ fi
+ json_select ..
+ fi
}
-next_vlan=3
+addr_offset=2
generate_network() {
- local vlan
+ local ifname macaddr protocol type ipaddr netmask
json_select network
- json_select "$1"
- json_get_vars ifname create_vlan macaddr
- json_select ..
+ json_select "$1"
+ json_get_vars ifname macaddr protocol ipaddr netmask
+ json_select ..
json_select ..
[ -n "$ifname" ] || return
- if [ "${create_vlan:-0}" -eq 1 ]; then
- case "$1" in
- lan) vlan=1;;
- wan) vlan=2;;
- *)
- vlan=$next_vlan
- next_vlan=$((next_vlan + 1))
- ;;
- esac
- fi
-
- [ -n "$vlan" ] && ifname=${ifname}.${vlan}
+ # force bridge for multi-interface devices (and lan)
+ case "$1:$ifname" in
+ *\ * | lan:*) type="bridge" ;;
+ esac
uci -q batch <<-EOF
delete network.$1
set network.$1='interface'
+ set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
- set network.$1.macaddr='$macaddr'
EOF
- case "$1" in
- lan)
+ [ -n "$macaddr" ] && uci -q batch <<-EOF
+ delete network.$1_dev
+ set network.$1_dev='device'
+ set network.$1_dev.name='$ifname'
+ set network.$1_dev.macaddr='$macaddr'
+ EOF
+
+ case "$protocol" in
+ static)
+ local ipad
+ case "$1" in
+ lan) ipad=${ipaddr:-"192.168.1.1"} ;;
+ *) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
+ esac
+
+ netm=${netmask:-"255.255.255.0"}
+
uci -q batch <<-EOF
- set network.$1.type='bridge'
set network.$1.proto='static'
- set network.$1.ipaddr='192.168.1.1'
- set network.$1.netmask='255.255.255.0'
+ set network.$1.ipaddr='$ipad'
+ set network.$1.netmask='$netm'
set network.$1.ip6assign='60'
EOF
;;
- wan)
+ dhcp)
+ # fixup IPv6 slave interface if parent is a bridge
+ [ "$type" = "bridge" ] && ifname="br-$1"
+
uci -q batch <<-EOF
set network.$1.proto='dhcp'
- delete network.wan6
- set network.wan6='interface'
- set network.wan6.ifname='$ifname'
- set network.wan6.proto='dhcpv6'
+ delete network.${1}6
+ set network.${1}6='interface'
+ set network.${1}6.ifname='$ifname'
+ set network.${1}6.proto='dhcpv6'
EOF
;;
- *)
+ pppoe)
+ # fixup IPv6 slave interface
+ ifname="pppoe-$1"
+
uci -q batch <<-EOF
- set network.$1.force_link=1
+ set network.$1.proto='pppoe'
+ set network.$1.username='username'
+ set network.$1.password='password'
+ set network.$1.ipv6='auto'
+ delete network.${1}6
+ set network.${1}6='interface'
+ set network.${1}6.ifname='$ifname'
+ set network.${1}6.proto='dhcpv6'
EOF
;;
esac
}
-generate_switch_vlan() {
- local device="$1"
- local vlan="$2"
- local cpu_port="$3"
-
- case "$vlan" in
- lan) vlan=1;;
- wan) vlan=2;;
- *) vlan="${vlan##vlan}";;
- esac
-
- json_select vlans
- json_select "$2"
- json_get_values ports
- json_select ..
- json_select ..
-
- uci -q batch <<-EOF
- add network switch_vlan
- set network.@switch_vlan[-1].device='$device'
- set network.@switch_vlan[-1].vlan='$vlan'
- set network.@switch_vlan[-1].ports='$ports ${cpu_port}t'
- EOF
-}
-
-calculate_switch_vlans() {
+generate_switch_vlans_ports() {
local switch="$1"
- local ports port attr val
- local prev_role
- local num device role index
- local n_cpu=0 cpu0 cpu1 cpu2 cpu3
- local dev0 dev1 dev2 dev3 role0 role1 role2 role3
- local n_vlan=0 vlan_off=-1
- local vlan_ports cpu_port
+ local port ports role roles num attr val
- json_get_keys ports ports
-
- json_select ports
+ #
+ # autogenerate vlans
+ #
- # gather all cpu ports and count vlans
- for port in $ports; do
- json_select "$port"
- json_get_vars num device role
+ if json_is_a roles array; then
+ json_get_keys roles roles
+ json_select roles
- if json_is_a attr object; then
- json_get_keys attr attr
- json_select attr
+ for role in $roles; do
+ json_select "$role"
+ json_get_vars ports
+ json_select ..
uci -q batch <<-EOF
- add network switch_port
- set network.@switch_port[-1].device='$switch'
- set network.@switch_port[-1].port=$num
+ add network switch_vlan
+ set network.@switch_vlan[-1].device='$switch'
+ set network.@switch_vlan[-1].vlan='$role'
+ set network.@switch_vlan[-1].ports='$ports'
EOF
-
- for attr in $attr; do
- json_get_var val "$attr"
- uci -q set network.@switch_port[-1].$attr="$val"
- done
-
- json_select ..
- fi
+ done
json_select ..
+ fi
- if [ -n "$num" ] && [ -n "$device" ]; then
- export "cpu$n_cpu=$num"
- export "dev$n_cpu=$device"
- n_cpu=$((n_cpu + 1))
- elif [ -n "$num" ] && [ -n "$role" ] && [ "$role" != "$prev_role" ]; then
- export "role$n_vlan=$role"
- n_vlan=$((n_vlan + 1))
- prev_role="$role"
- fi
- done
-
- unset prev_role
- # autogenerate vlans
- for port in $ports ""; do
- if [ -n "$port" ]; then
- json_select "$port"
- json_get_vars num device role
- json_select ..
- else
- num="-"; role="-"
- fi
+ #
+ # write port specific settings
+ #
- if [ -n "$num" ] && [ -n "$role" ]; then
- if [ "$role" != "$prev_role" ]; then
- if [ -n "$vlan_ports" ]; then
- let cpu_port="cpu$((vlan_off % n_cpu))"
- [ $n_vlan -gt $n_cpu ] && cpu_port="${cpu_port}t"
+ if json_is_a ports array; then
+ json_get_keys ports ports
+ json_select ports
- uci -q batch <<-EOF
- add network switch_vlan
- set network.@switch_vlan[-1].device='$switch'
- set network.@switch_vlan[-1].vlan='$((vlan_off + 1))'
- set network.@switch_vlan[-1].ports='$vlan_ports $cpu_port'
- EOF
+ for port in $ports; do
+ json_select "$port"
+ json_get_vars num
+
+ if json_is_a attr object; then
+ json_get_keys attr attr
+ json_select attr
+ uci -q batch <<-EOF
+ add network switch_port
+ set network.@switch_port[-1].device='$switch'
+ set network.@switch_port[-1].port=$num
+ EOF
+
+ for attr in $attr; do
+ json_get_var val "$attr"
+ uci -q set network.@switch_port[-1].$attr="$val"
+ done
+ json_select ..
fi
+ json_select ..
+ done
- vlan_off=$((vlan_off + 1))
- vlan_ports="$num"
- prev_role="$role"
- else
- vlan_ports="$vlan_ports $num"
- fi
-
- fi
- done
-
- json_select ..
-
- # autogenerate interfaces
- vlan_off=0; while [ $vlan_off -lt $n_vlan ]; do
- eval role="\$role$((vlan_off))"
- eval device="\$dev$((vlan_off++ % n_cpu))"
- [ $n_vlan -gt $n_cpu ] && device="$device.$vlan_off"
-
- # quirk: append ifnames for subsequent switches
- case "$switch" in switch[1-9])
- local prev_devs="$(uci -q get "network.$role.ifname")"
- if echo "$prev_devs" | grep -wq "$device"; then
- device="$prev_devs"
- else
- device="$prev_devs $device"
- fi
- ;; esac
-
- uci -q batch <<-EOF
- set network.$role='interface'
- set network.$role.ifname='$device'
- EOF
-
- case $role in
- lan)
- uci -q batch <<-EOF
- set network.lan.type='bridge'
- set network.lan.proto='static'
- set network.lan.ipaddr='192.168.1.1'
- set network.lan.netmask='255.255.255.0'
- set network.lan.ip6assign='60'
- EOF
- ;;
-
- wan)
- uci -q batch <<-EOF
- set network.wan.proto='dhcp'
- set network.wan6='interface'
- set network.wan6.ifname='$device'
- set network.wan6.proto='dhcpv6'
- EOF
- ;;
-
- *)
- uci -q batch <<-EOF
- set network.$role.force_link='1'
- set network.$role.proto='none'
- EOF
- ;;
- esac
- done
+ json_select ..
+ fi
}
generate_switch() {
set network.@switch[-1].blinkrate='$blinkrate'
EOF
- if [ -n "$cpu_port" ]; then
- json_get_keys vlans vlans
- for vlan in $vlans; do generate_switch_vlan $1 $vlan $cpu_port; done
- elif json_is_a ports array; then
- calculate_switch_vlans $1
- fi
+ generate_switch_vlans_ports "$1"
json_select ..
json_select ..
}
+
+generate_static_system() {
+ uci -q batch <<-EOF
+ delete system.@system[0]
+ add system system
+ set system.@system[-1].hostname='lede'
+ set system.@system[-1].timezone='UTC'
+ set system.@system[-1].ttylogin='0'
+ set system.@system[-1].log_size='64'
+ set system.@system[-1].urandom_seed='0'
+
+ delete system.ntp
+ set system.ntp='timeserver'
+ set system.ntp.enabled='1'
+ set system.ntp.enable_server='0'
+ add_list system.ntp.server='0.lede.pool.ntp.org'
+ add_list system.ntp.server='1.lede.pool.ntp.org'
+ add_list system.ntp.server='2.lede.pool.ntp.org'
+ add_list system.ntp.server='3.lede.pool.ntp.org'
+ EOF
+
+ if json_is_a system object; then
+ json_select system
+ local hostname
+ if json_get_var hostname hostname; then
+ uci -q set "system.@system[-1].hostname=$hostname"
+ fi
+
+ if json_is_a ntpserver array; then
+ local keys key
+ json_get_keys keys ntpserver
+ json_select ntpserver
+ uci -q delete "system.ntp.server"
+
+ for key in $keys; do
+ local server
+ if json_get_var server "$key"; then
+ uci -q add_list "system.ntp.server=$server"
+ fi
+ done
+ json_select ..
+ fi
+ json_select ..
+ fi
+}
+
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
;;
netdev)
- local device
- json_get_vars device
+ local device mode
+ json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
- set system.$cfg.mode='link tx rx'
+ set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
EOF
;;
+ usbport)
+ local ports port
+ json_get_values ports ports
+ uci set system.$cfg.trigger='usbport'
+ for port in $ports; do
+ uci add_list system.$cfg.port=$port
+ done
+ ;;
+
rssi)
local iface minq maxq offset factor
json_get_vars iface minq maxq offset factor
;;
switch)
- local port_mask
- json_get_vars port_mask
+ local port_mask speed_mask
+ json_get_vars port_mask speed_mask
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
+ set system.$cfg.speed_mask='$speed_mask'
+ EOF
+ ;;
+
+ portstate)
+ local port_state
+ json_get_vars port_state
+ uci -q batch <<-EOF
+ set system.$cfg.port_state='$port_state'
+ EOF
+ ;;
+
+ timer|oneshot)
+ local delayon delayoff
+ json_get_vars delayon delayoff
+ uci -q batch <<-EOF
+ set system.$cfg.trigger='$type'
+ set system.$cfg.delayon='$delayon'
+ set system.$cfg.delayoff='$delayoff'
EOF
;;
esac
json_select ..
}
+generate_gpioswitch() {
+ local cfg="$1"
+
+ json_select gpioswitch
+ json_select "$cfg"
+ local name pin default
+ json_get_vars name pin default
+ uci -q batch <<-EOF
+ delete system.$cfg
+ set system.$cfg='gpio_switch'
+ set system.$cfg.name='$name'
+ set system.$cfg.gpio_pin='$pin'
+ set system.$cfg.value='$default'
+ EOF
+ json_select ..
+ json_select ..
+}
+
json_init
json_load "$(cat ${CFG})"
-generate_static_network
+if [ ! -s /etc/config/network ]; then
+ touch /etc/config/network
+ generate_static_network
+
+ json_get_keys keys network
+ for key in $keys; do generate_network $key; done
-json_get_keys keys network
-for key in $keys; do generate_network $key; done
+ json_get_keys keys switch
+ for key in $keys; do generate_switch $key; done
+fi
-json_get_keys keys switch
-for key in $keys; do generate_switch $key; done
+if [ ! -s /etc/config/system ]; then
+ touch /etc/config/system
+ generate_static_system
-json_get_keys keys rssimon
-for key in $keys; do generate_rssimon $key; done
+ json_get_keys keys rssimon
+ for key in $keys; do generate_rssimon $key; done
-json_get_keys keys led
-for key in $keys; do generate_led $key; done
+ json_get_keys keys gpioswitch
+ for key in $keys; do generate_gpioswitch $key; done
+ json_get_keys keys led
+ for key in $keys; do generate_led $key; done
+fi
uci commit