/* vi: set sw=4 ts=4: */
/*
- * ifupdown for busybox
- * Copyright (c) 2002 Glenn McGrath
- *
Copyright (c) 2003-2004 Erik Andersen <andersen@codepoet.org>
+ * ifup/ifdown for busybox
+ * Copyright (c) 2002 Glenn McGrath
+ * Copyright (c) 2003-2004 Erik Andersen <andersen@codepoet.org>
*
- * Based on ifupdown v 0.6.4 by Anthony Towns
- *
Copyright (c) 1999 Anthony Towns <aj@azure.humbug.org.au>
+ * Based on ifupdown v 0.6.4 by Anthony Towns
+ * Copyright (c) 1999 Anthony Towns <aj@azure.humbug.org.au>
*
- * Changes to upstream version
- * Remove checks for kernel version, assume kernel version 2.2.0 or better.
- * Lines in the interfaces file cannot wrap.
- * To adhere to the FHS, the default state file is /var/run/ifstate
- * (defined via CONFIG_IFUPDOWN_IFSTATE_PATH) and can be overridden by build
- * configuration.
+ * Changes to upstream version
+ * Remove checks for kernel version, assume kernel version 2.2.0 or better.
+ * Lines in the interfaces file cannot wrap.
+ * To adhere to the FHS, the default state file is /var/run/ifstate
+ * (defined via CONFIG_IFUPDOWN_IFSTATE_PATH) and can be overridden by build
+ * configuration.
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
+//config:config IFUP
+//config: bool "ifup (14 kb)"
+//config: default y
+//config: help
+//config: Activate the specified interfaces. This applet makes use
+//config: of either "ifconfig" and "route" or the "ip" command to actually
+//config: configure network interfaces. Therefore, you will probably also want
+//config: to enable either IFCONFIG and ROUTE, or enable
+//config: FEATURE_IFUPDOWN_IP and the various IP options. Of
+//config: course you could use non-busybox versions of these programs, so
+//config: against my better judgement (since this will surely result in plenty
+//config: of support questions on the mailing list), I do not force you to
+//config: enable these additional options. It is up to you to supply either
+//config: "ifconfig", "route" and "run-parts" or the "ip" command, either
+//config: via busybox or via standalone utilities.
+//config:
+//config:config IFDOWN
+//config: bool "ifdown (13 kb)"
+//config: default y
+//config: help
+//config: Deactivate the specified interfaces.
+//config:
+//config:config IFUPDOWN_IFSTATE_PATH
+//config: string "Absolute path to ifstate file"
+//config: default "/var/run/ifstate"
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: ifupdown keeps state information in a file called ifstate.
+//config: Typically it is located in /var/run/ifstate, however
+//config: some distributions tend to put it in other places
+//config: (debian, for example, uses /etc/network/run/ifstate).
+//config: This config option defines location of ifstate.
+//config:
+//config:config FEATURE_IFUPDOWN_IP
+//config: bool "Use ip tool (else ifconfig/route is used)"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+//config: than the default of using the older "ifconfig" and "route" utilities.
+//config:
+//config: If Y: you must install either the full-blown iproute2 package
+//config: or enable "ip" applet in busybox, or the "ifup" and "ifdown" applets
+//config: will not work.
+//config:
+//config: If N: you must install either the full-blown ifconfig and route
+//config: utilities, or enable these applets in busybox.
+//config:
+//config:config FEATURE_IFUPDOWN_IPV4
+//config: bool "Support IPv4"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: If you want ifup/ifdown to talk IPv4, leave this on.
+//config:
+//config:config FEATURE_IFUPDOWN_IPV6
+//config: bool "Support IPv6"
+//config: default y
+//config: depends on (IFUP || IFDOWN) && FEATURE_IPV6
+//config: help
+//config: If you need support for IPv6, turn this option on.
+//config:
+//UNUSED:
+////////:config FEATURE_IFUPDOWN_IPX
+////////: bool "Support IPX"
+////////: default y
+////////: depends on IFUP || IFDOWN
+////////: help
+////////: If this option is selected you can use busybox to work with IPX
+////////: networks.
+//config:
+//config:config FEATURE_IFUPDOWN_MAPPING
+//config: bool "Enable mapping support"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: This enables support for the "mapping" stanza, unless you have
+//config: a weird network setup you don't need it.
+//config:
+//config:config FEATURE_IFUPDOWN_EXTERNAL_DHCP
+//config: bool "Support external DHCP clients"
+//config: default n
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: This enables support for the external dhcp clients. Clients are
+//config: tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+//config: Otherwise, if udhcpc applet is enabled, it is used.
+//config: Otherwise, ifup/ifdown will have no support for DHCP.
+
+// APPLET_ODDNAME:name main location suid_type help
+//applet:IF_IFUP( APPLET_ODDNAME(ifup, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifup))
+//applet:IF_IFDOWN(APPLET_ODDNAME(ifdown, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifdown))
+
+//kbuild:lib-$(CONFIG_IFUP) += ifupdown.o
+//kbuild:lib-$(CONFIG_IFDOWN) += ifupdown.o
//usage:#define ifup_trivial_usage
//usage: "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
//usage:#define ifup_full_usage "\n\n"
-//usage: " -a De/configure all interfaces automatically"
-//usage: "\n -i FILE Use FILE for interface definitions"
+//usage: " -a Configure all interfaces"
+//usage: "\n -i FILE Use FILE instead of /etc/network/interfaces"
//usage: "\n -n Print out what would happen, but don't do it"
//usage: IF_FEATURE_IFUPDOWN_MAPPING(
//usage: "\n (note: doesn't disable mappings)"
//usage: "\n -m Don't run any mappings"
//usage: )
//usage: "\n -v Print out what would happen before doing it"
-//usage: "\n -f Force de/configuration"
+//usage: "\n -f Force configuration"
//usage:
//usage:#define ifdown_trivial_usage
//usage: "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
//usage:#define ifdown_full_usage "\n\n"
-//usage: " -a De/configure all interfaces automatically"
+//usage: " -a Deconfigure all interfaces"
//usage: "\n -i FILE Use FILE for interface definitions"
//usage: "\n -n Print out what would happen, but don't do it"
//usage: IF_FEATURE_IFUPDOWN_MAPPING(
//usage: "\n -m Don't run any mappings"
//usage: )
//usage: "\n -v Print out what would happen before doing it"
-//usage: "\n -f Force de/configuration"
+//usage: "\n -f Force deconfiguration"
+#include <net/if.h>
#include "libbb.h"
#include "common_bufsiz.h"
/* After libbb.h, since it needs sys/types.h on some systems */
#endif
#define UDHCPC_CMD_OPTIONS CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
+#define IFSTATE_FILE_PATH CONFIG_IFUPDOWN_IFSTATE_PATH
#define debug_noise(args...) /*fprintf(stderr, args)*/
char *shell;
} FIX_ALIASING;
#define G (*(struct globals*)bb_common_bufsiz1)
-#define INIT_G() do { } while (0)
+#define INIT_G() do { setup_common_bufsiz(); } while (0)
static const char keywords_up_down[] ALIGN1 =
static int FAST_FUNC static_down6(struct interface_defn_t *ifd, execfn *exec)
{
+ if (!if_nametoindex(ifd->iface))
+ return 1; /* already gone */
# if ENABLE_FEATURE_IFUPDOWN_IP
return execute("ip link set %iface% down", ifd, exec);
# else
result = execute("ifconfig %iface%[[ hw %hwaddress%]][[ media %media%]][[ mtu %mtu%]] up",
ifd, exec);
result += execute("ifconfig %iface% %address% netmask %netmask%"
- "[[ broadcast %broadcast%]][[ pointopoint %pointopoint%]] ",
+ "[[ broadcast %broadcast%]][[ pointopoint %pointopoint%]]",
ifd, exec);
result += execute("[[route add default gw %gateway%[[ metric %metric%]] %iface%]]", ifd, exec);
return ((result == 3) ? 3 : 0);
static int FAST_FUNC static_down(struct interface_defn_t *ifd, execfn *exec)
{
int result;
+
+ if (!if_nametoindex(ifd->iface))
+ return 2; /* already gone */
# if ENABLE_FEATURE_IFUPDOWN_IP
- result = execute("ip addr flush dev %iface%", ifd, exec);
+ /* Optional "label LBL" is necessary if interface is an alias (eth0:0),
+ * otherwise "ip addr flush dev eth0:0" flushes all addresses on eth0.
+ */
+ result = execute("ip addr flush dev %iface%[[ label %label%]]", ifd, exec);
result += execute("ip link set %iface% down", ifd, exec);
# else
/* result = execute("[[route del default gw %gateway% %iface%]]", ifd, exec); */
if (executable_exists(ext_dhcp_clients[i].name))
return execute(ext_dhcp_clients[i].startcmd, ifd, exec);
}
- bb_error_msg("no dhcp clients found");
+ bb_simple_error_msg("no dhcp clients found");
return 0;
}
# elif ENABLE_UDHCPC
}
if (!result)
- bb_error_msg("warning: no dhcp clients found and stopped");
+ bb_simple_error_msg("warning: no dhcp clients found and stopped");
/* Sleep a bit, otherwise static_down tries to bring down interface too soon,
and it may come back up because udhcpc is still shutting down */
currently_processing = NONE;
} else if (strcmp(first_word, "source") == 0) {
read_interfaces(next_word(&rest_of_line), defn);
+ } else if (is_prefixed_with(first_word, "source-dir")) {
+ const char *dirpath;
+ DIR *dir;
+ struct dirent *entry;
+
+ dirpath = next_word(&rest_of_line);
+ dir = xopendir(dirpath);
+ while ((entry = readdir(dir)) != NULL) {
+ char *path;
+ if (entry->d_name[0] == '.')
+ continue;
+ path = concat_path_file(dirpath, entry->d_name);
+ read_interfaces(path, defn);
+ free(path);
+ }
+ closedir(dir);
} else {
switch (currently_processing) {
case IFACE:
static int execute_all(struct interface_defn_t *ifd, const char *opt)
{
+ /* 'opt' is always short, the longest value is "post-down".
+ * Can use on-stack buffer instead of xasprintf'ed one.
+ */
+ char buf[sizeof("run-parts /etc/network/if-%s.d")
+ + sizeof("post-down")
+ /*paranoia:*/ + 8
+ ];
int i;
- char *buf;
+
for (i = 0; i < ifd->n_options; i++) {
if (strcmp(ifd->option[i].name, opt) == 0) {
if (!doit(ifd->option[i].value)) {
}
}
- buf = xasprintf("run-parts /etc/network/if-%s.d", opt);
- /* heh, we don't bother free'ing it */
+ /* Tested on Debian Squeeze: "standard" ifup runs this without
+ * checking that directory exists. If it doesn't, run-parts
+ * complains, and this message _is_ annoyingly visible.
+ * Don't "fix" this (unless newer Debian does).
+ */
+ sprintf(buf, "run-parts /etc/network/if-%s.d", opt);
return doit(buf);
}
static llist_t *read_iface_state(void)
{
llist_t *state_list = NULL;
- FILE *state_fp = fopen_for_read(CONFIG_IFUPDOWN_IFSTATE_PATH);
+ FILE *state_fp = fopen_for_read(IFSTATE_FILE_PATH);
if (state_fp) {
char *start, *end_ptr;
return state_list;
}
+/* read the previous state from the state file */
+static FILE *open_new_state_file(void)
+{
+ int fd, flags, cnt;
+
+ cnt = 0;
+ flags = (O_WRONLY | O_CREAT | O_EXCL);
+ for (;;) {
+ fd = open(IFSTATE_FILE_PATH".new", flags, 0666);
+ if (fd >= 0)
+ break;
+ if (errno != EEXIST
+ || flags == (O_WRONLY | O_CREAT | O_TRUNC)
+ ) {
+ bb_perror_msg_and_die("can't open '%s'",
+ IFSTATE_FILE_PATH".new");
+ }
+ /* Someone else created the .new file */
+ if (cnt > 30 * 1000) {
+ /* Waited for 30*30/2 = 450 milliseconds, still EEXIST.
+ * Assuming a stale file, rewriting it.
+ */
+ flags = (O_WRONLY | O_CREAT | O_TRUNC);
+ continue;
+ }
+ usleep(cnt);
+ cnt += 1000;
+ }
+
+ return xfdopen_for_write(fd);
+}
int ifupdown_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int ifupdown_main(int argc UNUSED_PARAM, char **argv)
G.startup_PATH = getenv("PATH");
G.shell = xstrdup(get_shell_name());
- cmds = iface_down;
- if (applet_name[2] == 'u') {
+ if (ENABLE_IFUP
+ && (!ENABLE_IFDOWN || applet_name[2] == 'u')
+ ) {
/* ifup command */
cmds = iface_up;
+ } else {
+ cmds = iface_down;
}
getopt32(argv, OPTION_STR, &interfaces);
any_failures = 1;
} else if (!NO_ACT) {
/* update the state file */
- FILE *state_fp;
+ FILE *new_state_fp = open_new_state_file();
llist_t *state;
llist_t *state_list = read_iface_state();
llist_t *iface_state = find_iface_state(state_list, iface);
}
/* Actually write the new state */
- state_fp = xfopen_for_write(CONFIG_IFUPDOWN_IFSTATE_PATH);
state = state_list;
while (state) {
if (state->data) {
- fprintf(state_fp, "%s\n", state->data);
+ fprintf(new_state_fp, "%s\n", state->data);
}
state = state->link;
}
- fclose(state_fp);
+ fclose(new_state_fp);
+ xrename(IFSTATE_FILE_PATH".new", IFSTATE_FILE_PATH);
llist_free(state_list, free);
}
next:
projects / oweals / busybox.git / blobdiff