menu "Networking Utilities"
+INSERT
+
config FEATURE_IPV6
bool "Enable IPv6 support"
default y
config ARP
bool "arp"
default y
+ select PLATFORM_LINUX
help
Manipulate the system ARP cache.
config ARPING
bool "arping"
default y
+ select PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BRCTL
bool "brctl"
default y
+ select PLATFORM_LINUX
help
Manage ethernet bridges.
Supports addbr/delbr and addif/delif.
config ETHER_WAKE
bool "ether-wake"
default y
+ select PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
help
Utilizes password settings from /etc/httpd.conf for basic
authentication on a per url basis.
+ Example for httpd.conf file:
+ /adm:toor:PaSsWd
config FEATURE_HTTPD_AUTH_MD5
bool "Support MD5 crypted passwords for http Authentication"
default y
depends on FEATURE_HTTPD_BASIC_AUTH
help
- Enables basic per URL authentication from /etc/httpd.conf
- using md5 passwords.
+ Enables encrypted passwords, and wildcard user/passwords
+ in httpd.conf file.
+ User '*' means 'any system user name is ok',
+ password of '*' means 'use system password for this user'
+ Examples:
+ /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+ /adm:root:*
+ /wiki:*:*
config FEATURE_HTTPD_CGI
bool "Support Common Gateway Interface (CGI)"
help
This option enables support for running scripts through an
interpreter. Turn this on if you want PHP scripts to work
- properly. You need to supply an additional line in your httpd
- config file:
+ properly. You need to supply an additional line in your
+ httpd.conf file:
*.php:/path/to/your/php
config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
Then a request to /url/myfile will be forwarded to
http://hostname[:port]/new/path/myfile.
+config FEATURE_HTTPD_GZIP
+ bool "Support for GZIP content encoding"
+ default y
+ depends on HTTPD
+ help
+ Makes httpd send files using GZIP content encoding if the
+ client supports it and a pre-compressed <file>.gz exists.
+
config IFCONFIG
bool "ifconfig"
default y
+ select PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
config IFENSLAVE
bool "ifenslave"
default y
+ select PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
config IFPLUGD
bool "ifplugd"
default y
+ select PLATFORM_LINUX
help
Network interface plug detection daemon.
bool "Use busybox ip applet"
default y
depends on FEATURE_IFUPDOWN_IP
+ select PLATFORM_LINUX
select IP
select FEATURE_IP_ADDRESS
select FEATURE_IP_LINK
config IP
bool "ip"
default y
+ select PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
utility. You generally don't need "ip" to use busybox with
help
Support long options for the ipcalc applet.
-config NAMEIF
- bool "nameif"
- default y
- select FEATURE_SYSLOG
- help
- nameif is used to rename network interface by its MAC address.
- Renamed interfaces MUST be in the down state.
- It is possible to use a file (default: /etc/mactab)
- with list of new interface names and MACs.
- Maximum interface name length: IFNAMSIZ = 16
- File fields are separated by space or tab.
- File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
-
-config FEATURE_NAMEIF_EXTENDED
- bool "Extended nameif"
- default y
- depends on NAMEIF
- help
- This extends the nameif syntax to support the bus_info and driver
- checks. The syntax is compatible to the normal nameif.
- File format:
- new_interface_name driver=asix bus=usb-0000:00:08.2-3
- new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
- new_interface_name mac=00:80:C8:38:91:B5
- new_interface_name 00:80:C8:38:91:B5
-
-config NC
- bool "nc"
- default y
- help
- A simple Unix utility which reads and writes data across network
- connections.
-
-config NC_SERVER
- bool "Netcat server options (-l)"
- default y
- depends on NC
- help
- Allow netcat to act as a server.
-
-config NC_EXTRA
- bool "Netcat extensions (-eiw and filename)"
- default y
- depends on NC
- help
- Add -e (support for executing the rest of the command line after
- making or receiving a successful connection), -i (delay interval for
- lines sent), -w (timeout for initial connection).
-
config NETSTAT
bool "netstat"
default y
+ select PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
config NTPD
bool "ntpd"
default y
+ select PLATFORM_LINUX
help
The NTP client/server daemon.
Make ntpd usable as a NTP server. If you disable this option
ntpd will be usable only as a NTP client.
-config PING
- bool "ping"
- default y
- help
- ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
- elicit an ICMP ECHO_RESPONSE from a host or gateway.
-
-config PING6
- bool "ping6"
- default y
- depends on FEATURE_IPV6 && PING
- help
- This will give you a ping that can talk IPv6.
-
-config FEATURE_FANCY_PING
- bool "Enable fancy ping output"
- default y
- depends on PING
- help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
-
config PSCAN
bool "pscan"
default y
config ROUTE
bool "route"
default y
+ select PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config SLATTACH
bool "slattach"
default y
+ select PLATFORM_LINUX
help
slattach is a small utility to attach network interfaces to serial
lines.
mount -t devpts devpts /dev/pts
- You need to be sure that Busybox has LOGIN and
+ You need to be sure that busybox has LOGIN and
FEATURE_SUID enabled. And finally, you should make
certain that Busybox has been installed setuid root:
In other words: it should be run from inetd in nowait mode,
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+comment "Common options for tftp/tftpd"
+ depends on TFTP || TFTPD
+
config FEATURE_TFTP_GET
bool "Enable 'tftp get' and/or tftpd upload code"
default y
config TRACEROUTE
bool "traceroute"
default y
+ select PLATFORM_LINUX
help
Utility to trace the route of IP packets.
config TUNCTL
bool "tunctl"
default y
+ select PLATFORM_LINUX
help
tunctl creates or deletes tun devices.
config VCONFIG
bool "vconfig"
default y
+ select PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
help
Support long options for the wget applet.
+config FEATURE_WGET_TIMEOUT
+ bool "Enable read timeout option -T SEC"
+ default y
+ depends on WGET
+ help
+ Supports network read timeout for wget, so that wget will give
+ up and timeout when reading network data, through the -T command
+ line option. Currently only network data read timeout is
+ supported (i.e., timeout is not applied to the DNS nor TCP
+ connection initialization). When FEATURE_WGET_LONG_OPTIONS is
+ also enabled, the --timeout option will work in addition to -T.
+
config ZCIP
bool "zcip"
default y
+ select PLATFORM_LINUX
select FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
projects / oweals / busybox.git / blobdiff