bool "Enable IPv6 support"
default n
help
- Please submit a patch to add help text for this item.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
+
+config CONFIG_ARPING
+ bool "arping"
+ default n
+ help
+ Ping hosts by ARP packets
+
+config CONFIG_DNSD
+ bool "dnsd"
+ default n
+ help
+ Small and static DNS server daemon.
+
+config CONFIG_ETHER_WAKE
+ bool "ether-wake"
+ default n
+ help
+ Send a magic packet to wake up sleeping machines.
+
+config CONFIG_FAKEIDENTD
+ bool "fakeidentd"
+ default n
+ help
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
+
+config CONFIG_FTPGET
+ bool "ftpget"
+ default n
+ help
+ Retrieve a remote file via FTP.
+
+config CONFIG_FTPPUT
+ bool "ftpput"
+ default n
+ help
+ Store a remote file via FTP.
config CONFIG_HOSTNAME
bool "hostname"
default n
help
- Please submit a patch to add help text for this item.
+ Show or set the system's host name
+
+config CONFIG_HTTPD
+ bool "httpd"
+ default n
+ help
+ Serve web pages via an HTTP server.
+
+config CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+ bool "Support using httpd as a daemon (not from inetd)"
+ default n
+ depends on CONFIG_HTTPD
+ help
+ This option enables uid and port options for the httpd applet,
+ and eliminates the need to be called from the inetd server daemon.
+
+config CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool "Support reloading the global config file using hup signal"
+ default n
+ depends on CONFIG_HTTPD && CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+ help
+ This option enables processing of SIGHUP to reload cached
+ configuration settings.
+
+config CONFIG_FEATURE_HTTPD_SETUID
+ bool "Enable support -u <user> option"
+ default n
+ depends on CONFIG_HTTPD && CONFIG_FEATURE_HTTPD_WITHOUT_INETD
+ help
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
+
+config CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ bool "Enable Basic http Authentication"
+ default y
+ depends on CONFIG_HTTPD
+ help
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config CONFIG_FEATURE_HTTPD_AUTH_MD5
+ bool "Support MD5 crypted passwords for http Authentication"
+ default n
+ depends on CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per URL authentication from /etc/httpd.conf
+ using md5 passwords.
+
+config CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+ bool "Support loading additional MIME types at run-time"
+ default n
+ depends on CONFIG_HTTPD
+ help
+ This option enables support for additional MIME types at
+ run-time to be specified in the configuration file.
+
+config CONFIG_FEATURE_HTTPD_CGI
+ bool "Support Common Gateway Interface (CGI)"
+ default y
+ depends on CONFIG_HTTPD
+ help
+ This option allows scripts and executables to be invoked
+ when specific URLs are requested.
+
+config CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+ bool "Enable support for running scripts through an interpreter"
+ default n
+ depends on CONFIG_FEATURE_HTTPD_CGI
+ help
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an addition line in your httpd
+ config file:
+ *.php:/path/to/your/php
+
+config CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+ bool "Support the REMOTE_PORT environment variable for CGI"
+ default n
+ depends on CONFIG_FEATURE_HTTPD_CGI
+ help
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
+
+config CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
+ bool "Enable the -e option for shell script CGI simplification."
+ default y
+ depends on CONFIG_HTTPD
+ help
+ This option allows html encoding arbitrary
+ strings for display of the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" as
+ "<Hello World>".
config CONFIG_IFCONFIG
bool "ifconfig"
default n
help
- Please submit a patch to add help text for this item.
+ Ifconfig is used to configure the kernel-resident network interfaces.
config CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
+ bool "Enable status reporting output (+7k)"
default y
depends on CONFIG_IFCONFIG
help
- Please submit a patch to add help text for this item.
+ If ifconfig is called with no arguments it will display the status
+ of the currently active interfaces.
config CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default n
depends on CONFIG_IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
+ planning on using serial lines, leave this unchecked.
config CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default n
depends on CONFIG_IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Allow the start address for shared memory, start address for I/O,
+ and/or the interrupt line used by the specified device.
config CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
+ bool "Enable option \"hw\" (ether only)"
default y
depends on CONFIG_IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Set the hardware address of this interface, if the device driver
+ supports this operation. Currently, we only support the 'ether'
+ class.
config CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
+ bool "Set the broadcast automatically"
default n
depends on CONFIG_IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Setting this will make ifconfig attempt to find the broadcast
+ automatically if the value '+' is used.
config CONFIG_IFUPDOWN
bool "ifupdown"
default n
+ select CONFIG_RUN_PARTS
+ help
+ Activate or deactivate the specified interfaces. This applet makes
+ use of either "ifconfig" and "route" or the "ip" command to actually
+ configure network interfaces. Therefore, you will probably also want
+ to enable either CONFIG_IFCONFIG and CONFIG_ROUTE, or enable
+ CONFIG_FEATURE_IFUPDOWN_IP and the various CONFIG_IP options. Of
+ course you could use non-busybox versions of these programs, so
+ against my better judgement (since this will surely result in plenty
+ of support questions on the mailing list), I do not force you to
+ enable these additional options. It is up to you to supply either
+ "ifconfig" and "route" or the "ip" command, either via busybox or via
+ standalone utilities.
+
+config CONFIG_FEATURE_IFUPDOWN_IP
+ bool "Use ip applet"
+ default n
+ depends on CONFIG_IFUPDOWN
+ help
+ Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+ than the default of using the older 'ifconfig' and 'route' utilities.
+
+config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+ bool "Use busybox ip applet"
+ default y
+ depends on CONFIG_FEATURE_IFUPDOWN_IP
+ select CONFIG_IP
+ select CONFIG_FEATURE_IP_ADDRESS
+ select CONFIG_FEATURE_IP_LINK
+ select CONFIG_FEATURE_IP_ROUTE
+ help
+ Use the busybox iproute "ip" applet to implement "ifupdown".
+
+ If leave this disabled, you must install the full-blown iproute2
+ utility or the "ifup" and "ifdown" applets will not work.
+
+config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+ bool "Use busybox ifconfig and route applets"
+ default y
+ depends on CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+ select CONFIG_IFCONFIG
+ select CONFIG_ROUTE
help
- Please submit a patch to add help text for this item.
+ Use the busybox iproute "ifconfig" and "route" applets to
+ implement the "ifup" and "ifdown" utilities.
+
+ If leave this disabled, you must install the full-blown ifconfig
+ and route utilities, or the "ifup" and "ifdown" applets will not
+ work.
config CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
+ bool "Enable support for IPv4"
default y
depends on CONFIG_IFUPDOWN
help
- Please submit a patch to add help text for this item.
+ If you want busybox to talk IPv4, leave this on.
config CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6 (requires ip command)"
+ bool "Enable support for IPv6"
default n
- depends on CONFIG_IFUPDOWN
+ depends on CONFIG_IFUPDOWN && CONFIG_FEATURE_IPV6
help
- Please submit a patch to add help text for this item.
+ If you need support for IPv6, turn this option on.
config CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX (requires ipx_interface command)"
+ bool "Enable support for IPX"
default n
depends on CONFIG_IFUPDOWN
help
- Please submit a patch to add help text for this item.
+ If this option is selected you can use busybox to work with IPX
+ networks.
config CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
+ bool "Enable mapping support"
default n
depends on CONFIG_IFUPDOWN
help
This enables support for the "mapping" stanza, unless you have
- a weird network setup you dont need it.
+ a weird network setup you don't need it.
+
+config CONFIG_INETD
+ bool "inetd"
+ default n
+ help
+ Internet superserver daemon
+
+config CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
+ default y
+ depends on CONFIG_INETD
+ help
+ Echo received data internal inetd service
+
+config CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
+ default y
+ depends on CONFIG_INETD
+ help
+ Internet /dev/null internal inetd service
+
+config CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
+ default y
+ depends on CONFIG_INETD
+ help
+ Return 32 bit time since 1900 internal inetd service
+
+config CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
+ default y
+ depends on CONFIG_INETD
+ help
+ Return human-readable time internal inetd service
+
+config CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
+ default y
+ depends on CONFIG_INETD
+ help
+ Familiar character generator internal inetd service
+
+config CONFIG_FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default n
+ depends on CONFIG_INETD
+ help
+ Suuport Sun-RPC based services
+
config CONFIG_IP
bool "ip"
default n
help
- Please submit a patch to add help text for this item.
-
-if CONFIG_IP && CONFIG_IPADDR
- config CONFIG_FEATURE_IP_ADDRESS
- default y
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && CONFIG_IPADDR)
- config CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default n
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPLINK
- config CONFIG_FEATURE_IP_LINK
- default y
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && CONFIG_IPLINK)
- config CONFIG_FEATURE_IP_LINK
- bool " link"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPROUTE
- config CONFIG_FEATURE_IP_ROUTE
- default y
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && CONFIG_IPROUTE)
- config CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPTUNNEL
- config CONFIG_FEATURE_IP_TUNNEL
- default y
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && CONFIG_IPTUNNEL)
- config CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
+ The "ip" applet is a TCP/IP interface configuration and routing
+ utility. You generally don't need "ip" to use busybox with
+ TCP/IP.
-config CONFIG_IPCALC
- bool "ipcalc"
- default n
+config CONFIG_FEATURE_IP_ADDRESS
+ bool "ip address"
+ default y
+ depends on CONFIG_IP
help
- Please submit a patch to add help text for this item.
+ Address manipulation support for the "ip" applet.
-config CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 300 bytes"
+config CONFIG_FEATURE_IP_LINK
+ bool "ip link"
default y
- depends on CONFIG_IPCALC
+ depends on CONFIG_IP
help
- Please submit a patch to add help text for this item.
+ Configure network devices with "ip".
-config CONFIG_IPADDR
- bool "ipaddr"
+config CONFIG_FEATURE_IP_ROUTE
+ bool "ip route"
+ default y
+ depends on CONFIG_IP
+ help
+ Add support for routing table management to "ip".
+
+config CONFIG_FEATURE_IP_TUNNEL
+ bool "ip tunnel"
default n
+ depends on CONFIG_IP
help
- Please submit a patch to add help text for this item.
+ Add support for tunneling commands to "ip".
-config CONFIG_IPLINK
- bool "iplink"
+config CONFIG_FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands."
default n
+ depends on CONFIG_IP
help
- Please submit a patch to add help text for this item.
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
+
+config CONFIG_IPADDR
+ bool
+ default y
+ depends on CONFIG_FEATURE_IP_SHORT_FORMS && CONFIG_FEATURE_IP_ADDRESS
+
+config CONFIG_IPLINK
+ bool
+ default y
+ depends on CONFIG_FEATURE_IP_SHORT_FORMS && CONFIG_FEATURE_IP_LINK
config CONFIG_IPROUTE
- bool "iproute"
+ bool
+ default y
+ depends on CONFIG_FEATURE_IP_SHORT_FORMS && CONFIG_FEATURE_IP_ROUTE
+
+config CONFIG_IPTUNNEL
+ bool
+ default y
+ depends on CONFIG_FEATURE_IP_SHORT_FORMS && CONFIG_FEATURE_IP_TUNNEL
+
+config CONFIG_IPCALC
+ bool "ipcalc"
default n
help
- Please submit a patch to add help text for this item.
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
-config CONFIG_IPTUNNEL
- bool "iptunnel"
+config CONFIG_FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default y
+ depends on CONFIG_IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of "ipcalc".
+
+config CONFIG_NAMEIF
+ bool "nameif"
default n
help
- Please submit a patch to add help text for this item.
+ nameif is used to rename network interface by its MAC address.
+ Renamed interfaces MUST be in the down state.
+ It is possible to use a file (default: /etc/mactab)
+ with list of new interface names and MACs.
+ Maximum interface name length: IF_NAMESIZE = 16
+ File fields are separated by space or tab.
+ File format:
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
config CONFIG_NC
bool "nc"
default n
help
- Please submit a patch to add help text for this item.
+ A simple Unix utility which reads and writes data across network
+ connections.
+
+config CONFIG_NC_GAPING_SECURITY_HOLE
+ bool "gaping security hole"
+ default n
+ depends on CONFIG_NC
+ help
+ Add support for executing a program after making or receiving a
+ successful connection (-e option).
config CONFIG_NETSTAT
bool "netstat"
default n
help
- Please submit a patch to add help text for this item.
+ netstat prints information about the Linux networking subsystem.
config CONFIG_NSLOOKUP
bool "nslookup"
default n
help
- Please submit a patch to add help text for this item.
+ nslookup is a tool to query Internet name servers.
config CONFIG_PING
bool "ping"
default n
help
- Please submit a patch to add help text for this item.
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
config CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
+ bool "Enable fancy ping output"
default y
depends on CONFIG_PING
help
- Please submit a patch to add help text for this item.
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
config CONFIG_PING6
bool "ping6"
default n
depends on CONFIG_FEATURE_IPV6
help
- Please submit a patch to add help text for this item.
+ This will give you a ping that can talk IPv6.
config CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
+ bool "Enable fancy ping6 output"
default y
depends on CONFIG_PING6
help
- Please submit a patch to add help text for this item.
+ Make the output from the ping6 applet include statistics, and at the
+ same time provide full support for ICMP packets.
config CONFIG_ROUTE
bool "route"
default n
help
- Please submit a patch to add help text for this item.
+ Route displays or manipulates the kernel's IP routing tables.
config CONFIG_TELNET
bool "telnet"
default n
help
- Please submit a patch to add help text for this item.
+ Telnet is an interface to the TELNET protocol, but is also commonly
+ used to test other simple protocols.
config CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
+ bool "Pass TERM type to remote host"
default y
depends on CONFIG_TELNET
help
- Please submit a patch to add help text for this item.
+ Setting this option will forward the TERM environment variable to the
+ remote host you are connecting to. This is useful to make sure that
+ things like ANSI colors and other control sequences behave.
+
+config CONFIG_FEATURE_TELNET_AUTOLOGIN
+ bool "Pass USER type to remote host"
+ default y
+ depends on CONFIG_TELNET
+ help
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
config CONFIG_TELNETD
bool "telnetd"
default n
help
- Please submit a patch to add help text for this item.
+ A daemon for the TELNET protocol, allowing you to log onto the host
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
+ http://matt.ucc.asn.au/dropbear/dropbear.html
+
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_DEVPTS_FS=y
+
+ Next, you need a /dev/pts directory on your root filesystem:
+
+ $ ls -ld /dev/pts
+ drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
+
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+ $ ls -la /dev/ptmx
+ crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
+
+ mount -t devpts devpts /dev/pts
+
+ You need to be sure that Busybox has CONFIG_LOGIN and
+ CONFIG_FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
+
+ chown root.root /bin/busybox
+ chmod 4755 /bin/busybox
+
+ with all that done, telnetd _should_ work....
+
+
+config CONFIG_FEATURE_TELNETD_INETD
+ bool "Support call from inetd only"
+ default n
+ depends on CONFIG_TELNETD
+ help
+ Selecting this will make telnetd only callable from inetd,
+ removing the standalone support.
config CONFIG_TFTP
bool "tftp"
default n
help
- Please submit a patch to add help text for this item.
+ This enables the Trivial File Transfer Protocol client program. TFTP
+ is usually used for simple, small transfers such as a root image
+ for a network-enabled bootloader.
config CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
+ bool "Enable \"get\" command"
default y
depends on CONFIG_TFTP
help
- Please submit a patch to add help text for this item.
+ Add support for the GET command within the TFTP client. This allows
+ a client to retrieve a file from a TFTP server.
config CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
+ bool "Enable \"put\" command"
default y
depends on CONFIG_TFTP
help
- Please submit a patch to add help text for this item.
+ Add support for the PUT command within the TFTP client. This allows
+ a client to transfer a file to a TFTP server.
config CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
+ bool "Enable \"blocksize\" command"
default n
depends on CONFIG_TFTP
help
- Please submit a patch to add help text for this item.
+ Allow the client to specify the desired block size for transfers.
config CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
- default y
+ bool "Enable debug"
+ default n
depends on CONFIG_TFTP
help
- Please submit a patch to add help text for this item.
+ Enable debug settings for tftp. This is useful if you're running
+ into problems with tftp as the protocol doesn't help you much when
+ you run into problems.
config CONFIG_TRACEROUTE
bool "traceroute"
default n
help
- Please submit a patch to add help text for this item.
+ Utility to trace the route of IP packets
config CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
- default y
+ bool "Enable verbose output"
+ default n
depends on CONFIG_TRACEROUTE
help
- Please submit a patch to add help text for this item.
+ Add some verbosity to traceroute. This includes amongst other things
+ hostnames and ICMP response types.
-config CONFIG_FEATURE_TRACEROUTE_SO_DEBUG
- bool " Enable SO_DEBUG option"
- default y
+config CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
+ bool "Enable loose source route"
+ default n
+ depends on CONFIG_TRACEROUTE
+ help
+ Add option to specify a loose source route gateway
+ (8 maximum).
+
+config CONFIG_FEATURE_TRACEROUTE_USE_ICMP
+ bool "Use ICMP instead of UDP"
+ default n
depends on CONFIG_TRACEROUTE
help
- Please submit a patch to add help text for this item.
+ Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source networking/udhcp/Config.in
+
+config CONFIG_VCONFIG
+ bool "vconfig"
+ default n
+ help
+ Creates, removes, and configures VLAN interfaces
config CONFIG_WGET
bool "wget"
default n
help
- Please submit a patch to add help text for this item.
+ wget is a utility for non-interactive download of files from HTTP,
+ HTTPS, and FTP servers.
config CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
+ bool "Enable a nifty process meter (+2k)"
default y
depends on CONFIG_WGET
help
- Please submit a patch to add help text for this item.
+ Enable the transfer progress bar for wget transfers.
config CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
+ bool "Enable HTTP authentication"
default y
depends on CONFIG_WGET
help
- Please submit a patch to add help text for this item.
+ Support authenticated HTTP transfers.
-source networking/udhcp/Config.in
+config CONFIG_FEATURE_WGET_IP6_LITERAL
+ bool "Enable IPv6 literal addresses"
+ default y
+ depends on CONFIG_WGET && CONFIG_FEATURE_IPV6
+ help
+ Support IPv6 address literal notation in URLs.
-endmenu
+config CONFIG_ZCIP
+ bool "zcip"
+ default n
+ help
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
+
+endmenu