menu "Networking Utilities"
-config CONFIG_FEATURE_IPV6
+config FEATURE_IPV6
bool "Enable IPv6 support"
default n
help
- Enable IPv6 support to busybox. This makes applets that talk IP
- able to work with IPv6.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
-config CONFIG_ARPING
+config ARP
+ bool "arp"
+ default n
+ help
+ Manipulate the system ARP cache
+
+config ARPING
bool "arping"
default n
help
Ping hosts by ARP packets
-config CONFIG_FTPGET
- bool "ftpget"
+config DNSD
+ bool "dnsd"
default n
help
- Retrieve a remote file via FTP.
+ Small and static DNS server daemon.
-config CONFIG_FTPPUT
- bool "ftpput"
+config ETHER_WAKE
+ bool "ether-wake"
default n
help
- Store a remote file via FTP.
+ Send a magic packet to wake up sleeping machines.
-config CONFIG_HOSTNAME
- bool "hostname"
+config FAKEIDENTD
+ bool "fakeidentd"
default n
+ select FEATURE_SYSLOG
help
- Show or set the system's host name
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
-config CONFIG_HTTPD
- bool "httpd"
+config FTPGET
+ bool "ftpget"
default n
help
- Serve web pages via an HTTP server.
+ Retrieve a remote file via FTP.
-config CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
- bool " Support using httpd only from inetd"
+config FTPPUT
+ bool "ftpput"
default n
- depends on CONFIG_HTTPD
help
- This option disables uid and port options for the httpd applet
- but requires inetd server daemon.
+ Store a remote file via FTP.
-config CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool " Enable Basic http Authentication"
- default y
- depends on CONFIG_HTTPD
+config FEATURE_FTPGETPUT_LONG_OPTIONS
+ bool "Enable long options in ftpget/ftpput"
+ default n
+ depends on GETOPT_LONG && (FTPGET || FTPPUT)
help
- Utilizes password settings from /etc/httpd.conf for basic
- authentication on a per url basis.
+ Support long options for the ftpget/ftpput applet.
-config CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool " Support MD5 crypted passwords for http Authentication"
+config HOSTNAME
+ bool "hostname"
default n
- depends on CONFIG_FEATURE_HTTPD_BASIC_AUTH
help
- Enables basic per url authentication from /etc/httpd.conf
- using md5 passwords.
+ Show or set the system's host name
+config HTTPD
+ bool "httpd"
+ default n
+ help
+ Serve web pages via an HTTP server.
-if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-config CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
- bool " Support reloading the global config file using hup signal"
+config FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool "Support reloading the global config file using hup signal"
default n
- depends on CONFIG_HTTPD
+ depends on HTTPD
help
This option enables processing of SIGHUP to reload cached
configuration settings.
-config CONFIG_FEATURE_HTTPD_SETUID
- bool " Enable support -u <user> option"
+config FEATURE_HTTPD_SETUID
+ bool "Enable -u <user> option"
default n
- depends on CONFIG_HTTPD
+ depends on HTTPD
help
This option allows the server to run as a specific user
rather than defaulting to the user that starts the server.
- Use of this option requires special privilegies to change to a
+ Use of this option requires special privileges to change to a
different user.
-endif
-config CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
- bool " Support loading additional mime types at run-time"
+config FEATURE_HTTPD_BASIC_AUTH
+ bool "Enable Basic http Authentication"
+ default y
+ depends on HTTPD
+ help
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config FEATURE_HTTPD_AUTH_MD5
+ bool "Support MD5 crypted passwords for http Authentication"
+ default n
+ depends on FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per URL authentication from /etc/httpd.conf
+ using md5 passwords.
+
+config FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+ bool "Support loading additional MIME types at run-time"
default n
- depends on CONFIG_HTTPD
+ depends on HTTPD
help
- This option enables support for additional mime types at
+ This option enables support for additional MIME types at
run-time to be specified in the configuration file.
-config CONFIG_FEATURE_HTTPD_CGI
- bool " Support Common Gateway Interface (CGI)"
+config FEATURE_HTTPD_CGI
+ bool "Support Common Gateway Interface (CGI)"
default y
- depends on CONFIG_HTTPD
+ depends on HTTPD
help
This option allows scripts and executables to be invoked
- when specific urls are requested.
+ when specific URLs are requested.
-config CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- bool " Support the REMOTE_PORT environment variable for CGI"
+config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+ bool "Enable support for running scripts through an interpreter"
default n
- depends on CONFIG_FEATURE_HTTPD_CGI
+ depends on FEATURE_HTTPD_CGI
help
- Use of this option can assist scripts in generating
- references that contain a unique port number.
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an addition line in your httpd
+ config file:
+ *.php:/path/to/your/php
-config CONFIG_FEATURE_HTTPD_SET_CGI_VARS_TO_ENV
- bool " Enable setting of CGI_varname=value environment vars for CGI"
+config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+ bool "Support the REMOTE_PORT environment variable for CGI"
default n
- depends on CONFIG_FEATURE_HTTPD_CGI
+ depends on FEATURE_HTTPD_CGI
help
- This option parses POST or GET arguments from a form and
- sets environment variables with their value. This simplifies
- and speeds up CGI scripts. A form argument of foo=bar would
- result in a script having the environment variable CGI_foo set
- to 'bar'. In addition, this option sets a variable that
- lists all the argument names. e.g. CGI_VARNAMES_="name1 name2".
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
-config CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
- bool " Enable the -e option for shell script CGI simplification."
+config FEATURE_HTTPD_ENCODE_URL_STR
+ bool "Enable the -e option for shell script CGI simplification."
default y
- depends on CONFIG_HTTPD
+ depends on HTTPD
help
- After set, this option allows html encoding arbitrary
+ This option allows html encoding arbitrary
strings for display of the browser. Output goes to stdout.
For example, httpd -e "<Hello World>" as
"<Hello World>".
-config CONFIG_IFCONFIG
+config IFCONFIG
bool "ifconfig"
default n
help
Ifconfig is used to configure the kernel-resident network interfaces.
-config CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
+config FEATURE_IFCONFIG_STATUS
+ bool "Enable status reporting output (+7k)"
default y
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
If ifconfig is called with no arguments it will display the status
of the currently active interfaces.
-config CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+config FEATURE_IFCONFIG_SLIP
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
Allow "keepalive" and "outfill" support for SLIP. If you're not
planning on using serial lines, leave this unchecked.
-config CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
Allow the start address for shared memory, start address for I/O,
and/or the interrupt line used by the specified device.
-config CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
+config FEATURE_IFCONFIG_HW
+ bool "Enable option \"hw\" (ether only)"
default y
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
Set the hardware address of this interface, if the device driver
supports this operation. Currently, we only support the 'ether'
class.
-config CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
+config FEATURE_IFCONFIG_BROADCAST_PLUS
+ bool "Set the broadcast automatically"
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
Setting this will make ifconfig attempt to find the broadcast
automatically if the value '+' is used.
-config CONFIG_IFUPDOWN
+config IFUPDOWN
bool "ifupdown"
default n
+ select RUN_PARTS
help
Activate or deactivate the specified interfaces. This applet makes
use of either "ifconfig" and "route" or the "ip" command to actually
configure network interfaces. Therefore, you will probably also want
- to enable either CONFIG_IFCONFIG and CONFIG_ROUTE, or enable
- CONFIG_FEATURE_IFUPDOWN_IP and the various CONFIG_IP options. Of
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
course you could use non-busybox versions of these programs, so
against my better judgement (since this will surely result in plenty
of support questions on the mailing list), I do not force you to
"ifconfig" and "route" or the "ip" command, either via busybox or via
standalone utilities.
-config CONFIG_FEATURE_IFUPDOWN_IP
- bool " Use ip applet"
+config FEATURE_IFUPDOWN_IP
+ bool "Use ip applet"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
Use the iproute "ip" command to implement "ifup" and "ifdown", rather
than the default of using the older 'ifconfig' and 'route' utilities.
-config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ip applet"
+config FEATURE_IFUPDOWN_IP_BUILTIN
+ bool "Use busybox ip applet"
default y
- depends on CONFIG_FEATURE_IFUPDOWN_IP
- select CONFIG_IP
- select CONFIG_FEATURE_IP_ADDRESS
- select CONFIG_FEATURE_IP_LINK
- select CONFIG_FEATURE_IP_ROUTE
+ depends on FEATURE_IFUPDOWN_IP
+ select IP
+ select FEATURE_IP_ADDRESS
+ select FEATURE_IP_LINK
+ select FEATURE_IP_ROUTE
help
Use the busybox iproute "ip" applet to implement "ifupdown".
- If leave this disabled, you must install the full-blown iproute2
+ If left disabled, you must install the full-blown iproute2
utility or the "ifup" and "ifdown" applets will not work.
-config CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ifconfig and route applets"
+config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+ bool "Use busybox ifconfig and route applets"
default y
- depends on CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
- select CONFIG_IFCONFIG
- select CONFIG_ROUTE
+ depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
+ select IFCONFIG
+ select ROUTE
help
- Use the busybox iproute "ifconfig" and "route" applets to
+ Use the busybox iproute "ifconfig" and "route" applets to
implement the "ifup" and "ifdown" utilities.
- If leave this disabled, you must install the full-blown ifconfig
- and route utilities, or the "ifup" and "ifdown" applets will not
+ If left disabled, you must install the full-blown ifconfig
+ and route utilities, or the "ifup" and "ifdown" applets will not
work.
-config CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
+config FEATURE_IFUPDOWN_IPV4
+ bool "Enable support for IPv4"
default y
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
If you want busybox to talk IPv4, leave this on.
-config CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6"
+config FEATURE_IFUPDOWN_IPV6
+ bool "Enable support for IPv6"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN && FEATURE_IPV6
help
If you need support for IPv6, turn this option on.
-config CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX"
+config FEATURE_IFUPDOWN_IPX
+ bool "Enable support for IPX"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
If this option is selected you can use busybox to work with IPX
networks.
-config CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
+config FEATURE_IFUPDOWN_MAPPING
+ bool "Enable mapping support"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
This enables support for the "mapping" stanza, unless you have
- a weird network setup you dont need it.
+ a weird network setup you don't need it.
-config CONFIG_INETD
+config INETD
bool "inetd"
default n
+ select FEATURE_SYSLOG
help
Internet superserver daemon
-config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
- bool " Support echo service"
+config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
default y
- depends on CONFIG_INETD
+ depends on INETD
help
Echo received data internal inetd service
-config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
- bool " Support discard service"
+config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
default y
- depends on CONFIG_INETD
+ depends on INETD
help
Internet /dev/null internal inetd service
-config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
- bool " Support time service"
+config FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
default y
- depends on CONFIG_INETD
+ depends on INETD
help
Return 32 bit time since 1900 internal inetd service
-config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
- bool " Support daytime service"
+config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
default y
- depends on CONFIG_INETD
+ depends on INETD
help
Return human-readable time internal inetd service
-config CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
- bool " Support chargen service"
+config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
default y
- depends on CONFIG_INETD
+ depends on INETD
help
Familiar character generator internal inetd service
+config FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default n
+ depends on INETD
+ depends on FEATURE_HAVE_RPC
+ help
+ Support Sun-RPC based services
-config CONFIG_IP
+config IP
bool "ip"
default n
help
utility. You generally don't need "ip" to use busybox with
TCP/IP.
-if CONFIG_IP && CONFIG_IPADDR
- config CONFIG_FEATURE_IP_ADDRESS
- default y
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && CONFIG_IPADDR)
- config CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default y
- depends on CONFIG_IP
- help
- Address manipulation support for the "ip" applet.
-endif
-
-if CONFIG_IP && CONFIG_IPLINK
- config CONFIG_FEATURE_IP_LINK
- default y
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && CONFIG_IPLINK)
- config CONFIG_FEATURE_IP_LINK
- bool " link"
- default y
- depends on CONFIG_IP
- help
- Configure network devices with "ip".
-endif
-
-if CONFIG_IP && CONFIG_IPROUTE
- config CONFIG_FEATURE_IP_ROUTE
- default y
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && CONFIG_IPROUTE)
- config CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default y
- depends on CONFIG_IP
- help
- Add support for routing table management to "ip".
-endif
-
-if CONFIG_IP && CONFIG_IPTUNNEL
- config CONFIG_FEATURE_IP_TUNNEL
- default y
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && CONFIG_IPTUNNEL)
- config CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default n
- depends on CONFIG_IP
- help
- Add support for tunneling commands to "ip".
-endif
-
-config CONFIG_IPCALC
- bool "ipcalc"
- default n
+config FEATURE_IP_ADDRESS
+ bool "ip address"
+ default y
+ depends on IP
help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
+ Address manipulation support for the "ip" applet.
-config CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 1 kbyte"
+config FEATURE_IP_LINK
+ bool "ip link"
default y
- depends on CONFIG_IPCALC
+ depends on IP
help
- Adds the options hostname, prefix and silent to the output of "ipcalc".
+ Configure network devices with "ip".
-config CONFIG_IPADDR
- bool "ipaddr"
+config FEATURE_IP_ROUTE
+ bool "ip route"
+ default y
+ depends on IP
+ help
+ Add support for routing table management to "ip".
+
+config FEATURE_IP_TUNNEL
+ bool "ip tunnel"
default n
+ depends on IP
help
- Equivalent to selecting address support to "ip", above.
+ Add support for tunneling commands to "ip".
-config CONFIG_IPLINK
- bool "iplink"
+config FEATURE_IP_RULE
+ bool "ip rule"
default n
+ depends on IP
help
- Equivalent to selecting link support to "ip", above.
+ Add support for rule commands to "ip".
-config CONFIG_IPROUTE
- bool "iproute"
+config FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands."
default n
+ depends on IP
help
- Equivalent to selecting route support to "ip", above.
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
-config CONFIG_IPTUNNEL
- bool "iptunnel"
+config IPADDR
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS
+
+config IPLINK
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK
+
+config IPROUTE
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE
+
+config IPTUNNEL
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL
+
+config IPRULE
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE
+
+config IPCALC
+ bool "ipcalc"
default n
help
- Equivalent to selecting tunnel support to "ip", above.
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
+
+config FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default y
+ depends on IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of "ipcalc".
-config CONFIG_NAMEIF
+config FEATURE_IPCALC_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on IPCALC && GETOPT_LONG
+ help
+ Support long options for the ipcalc applet.
+
+config NAMEIF
bool "nameif"
default n
+ select FEATURE_SYSLOG
help
- nameif used to rename network interface by its MAC address.
+ nameif is used to rename network interface by its MAC address.
Renamed interfaces MUST be in the down state.
- It is possible to use file (default: /etc/mactab)
+ It is possible to use a file (default: /etc/mactab)
with list of new interface names and MACs.
Maximum interface name length: IF_NAMESIZE = 16
- File fields are sepatated by space or tab.
+ File fields are separated by space or tab.
File format:
# Comment
- new_interface_name XX:XX:XX:XX:XX:XX
+ new_interface_name XX:XX:XX:XX:XX:XX
-config CONFIG_NC
+config NC
bool "nc"
default n
help
A simple Unix utility which reads and writes data across network
connections.
-config CONFIG_NETSTAT
+config NC_SERVER
+ bool "Netcat server options (-lp)"
+ default n
+ depends on NC
+ help
+ Allow netcat to act as a server.
+
+config NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
+
+config NETSTAT
bool "netstat"
default n
help
- Netstat prints information about the Linux networking subsystem.
+ netstat prints information about the Linux networking subsystem.
-config CONFIG_NSLOOKUP
+config NSLOOKUP
bool "nslookup"
default n
help
- Nslookup is a tool to query Internet name servers.
+ nslookup is a tool to query Internet name servers.
-config CONFIG_PING
+config PING
bool "ping"
default n
help
- Ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
elicit an ICMP ECHO_RESPONSE from a host or gateway.
-config CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
+config FEATURE_FANCY_PING
+ bool "Enable fancy ping output"
default y
- depends on CONFIG_PING
+ depends on PING
help
Make the output from the ping applet include statistics, and at the
same time provide full support for ICMP packets.
-config CONFIG_PING6
+config PING6
bool "ping6"
default n
- depends on CONFIG_FEATURE_IPV6
+ depends on FEATURE_IPV6
help
This will give you a ping that can talk IPv6.
-config CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
+config FEATURE_FANCY_PING6
+ bool "Enable fancy ping6 output"
default y
- depends on CONFIG_PING6
+ depends on PING6
help
Make the output from the ping6 applet include statistics, and at the
same time provide full support for ICMP packets.
-config CONFIG_ROUTE
+config ROUTE
bool "route"
default n
help
Route displays or manipulates the kernel's IP routing tables.
-config CONFIG_TELNET
+config TELNET
bool "telnet"
default n
help
Telnet is an interface to the TELNET protocol, but is also commonly
used to test other simple protocols.
-config CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
+config FEATURE_TELNET_TTYPE
+ bool "Pass TERM type to remote host"
default y
- depends on CONFIG_TELNET
+ depends on TELNET
help
Setting this option will forward the TERM environment variable to the
remote host you are connecting to. This is useful to make sure that
things like ANSI colors and other control sequences behave.
-config CONFIG_TELNETD
+config FEATURE_TELNET_AUTOLOGIN
+ bool "Pass USER type to remote host"
+ default y
+ depends on TELNET
+ help
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
+
+config TELNETD
bool "telnetd"
default n
+ select FEATURE_SYSLOG
help
- A daemon for the TELNET protocol, allowing you to log on to the host
+ A daemon for the TELNET protocol, allowing you to log onto the host
running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for
- any SSH daemon and you trust your network, say 'y' here.
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
+ http://matt.ucc.asn.au/dropbear/dropbear.html
+
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
+ UNIX98_PTYS=y
+ DEVPTS_FS=y
-config CONFIG_FEATURE_TELNETD_INETD
- bool " Support call from inetd only"
+ Next, you need a /dev/pts directory on your root filesystem:
+
+ $ ls -ld /dev/pts
+ drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
+
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+ $ ls -la /dev/ptmx
+ crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
+
+ mount -t devpts devpts /dev/pts
+
+ You need to be sure that Busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
+
+ chown root.root /bin/busybox
+ chmod 4755 /bin/busybox
+
+ with all that done, telnetd _should_ work....
+
+
+config FEATURE_TELNETD_STANDALONE
+ bool "Support standalone telnetd (not inetd only)"
default n
- depends on CONFIG_TELNETD
+ depends on TELNETD
help
- Selecting this will make telnetd only callable from inetd, removing the
- standalone support.
+ Selecting this will make telnetd able to run standalone.
-config CONFIG_TFTP
+config TFTP
bool "tftp"
default n
help
- This enables the Tirvial File Transfer Protocol client program. TFTP
+ This enables the Trivial File Transfer Protocol client program. TFTP
is usually used for simple, small transfers such as a root image
for a network-enabled bootloader.
-config CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
+config FEATURE_TFTP_GET
+ bool "Enable \"get\" command"
default y
- depends on CONFIG_TFTP
+ depends on TFTP
help
Add support for the GET command within the TFTP client. This allows
- a client to retreive a file from a TFTP server.
+ a client to retrieve a file from a TFTP server.
-config CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
+config FEATURE_TFTP_PUT
+ bool "Enable \"put\" command"
default y
- depends on CONFIG_TFTP
+ depends on TFTP
help
Add support for the PUT command within the TFTP client. This allows
a client to transfer a file to a TFTP server.
-config CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
+config FEATURE_TFTP_BLOCKSIZE
+ bool "Enable \"blocksize\" command"
default n
- depends on CONFIG_TFTP
+ depends on TFTP
help
Allow the client to specify the desired block size for transfers.
-config CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
+config DEBUG_TFTP
+ bool "Enable debug"
default n
- depends on CONFIG_TFTP
+ depends on TFTP
help
Enable debug settings for tftp. This is useful if you're running
into problems with tftp as the protocol doesn't help you much when
you run into problems.
-config CONFIG_TRACEROUTE
+config TRACEROUTE
bool "traceroute"
default n
help
Utility to trace the route of IP packets
-config CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
+config FEATURE_TRACEROUTE_VERBOSE
+ bool "Enable verbose output"
default n
- depends on CONFIG_TRACEROUTE
+ depends on TRACEROUTE
help
Add some verbosity to traceroute. This includes amongst other things
hostnames and ICMP response types.
-config CONFIG_VCONFIG
+config FEATURE_TRACEROUTE_SOURCE_ROUTE
+ bool "Enable loose source route"
+ default n
+ depends on TRACEROUTE
+ help
+ Add option to specify a loose source route gateway
+ (8 maximum).
+
+config FEATURE_TRACEROUTE_USE_ICMP
+ bool "Use ICMP instead of UDP"
+ default n
+ depends on TRACEROUTE
+ help
+ Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source networking/udhcp/Config.in
+
+config VCONFIG
bool "vconfig"
default n
help
Creates, removes, and configures VLAN interfaces
-config CONFIG_WGET
+config WGET
bool "wget"
default n
help
- Wget is a utility for non-interactive download of files from HTTP,
+ wget is a utility for non-interactive download of files from HTTP,
HTTPS, and FTP servers.
-config CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
+config FEATURE_WGET_STATUSBAR
+ bool "Enable a nifty process meter (+2k)"
default y
- depends on CONFIG_WGET
+ depends on WGET
help
Enable the transfer progress bar for wget transfers.
-config CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
+config FEATURE_WGET_AUTHENTICATION
+ bool "Enable HTTP authentication"
default y
- depends on CONFIG_WGET
+ depends on WGET
help
Support authenticated HTTP transfers.
-config CONFIG_FEATURE_WGET_IP6_LITERAL
- bool " Enable IPv6 literal addresses"
+config FEATURE_WGET_IP6_LITERAL
+ bool "Enable IPv6 literal addresses"
default y
- depends on CONFIG_WGET
+ depends on WGET && FEATURE_IPV6
help
Support IPv6 address literal notation in URLs.
-source networking/udhcp/Config.in
+config FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on WGET && GETOPT_LONG
+ help
+ Support long options for the wget applet.
-endmenu
+config ZCIP
+ bool "zcip"
+ default n
+ select FEATURE_SYSLOG
+ help
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
+
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
+endmenu
projects / oweals / busybox.git / blobdiff