menu "Networking Utilities"
-config CONFIG_FEATURE_IPV6
+config FEATURE_IPV6
bool "Enable IPv6 support"
default n
help
- Please submit a patch to add help text for this item.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
-config CONFIG_FTPGET
+config ARPING
+ bool "arping"
+ default n
+ help
+ Ping hosts by ARP packets
+
+config DNSD
+ bool "dnsd"
+ default n
+ help
+ Small and static DNS server daemon.
+
+config ETHER_WAKE
+ bool "ether-wake"
+ default n
+ help
+ Send a magic packet to wake up sleeping machines.
+
+config FAKEIDENTD
+ bool "fakeidentd"
+ default n
+ select FEATURE_SYSLOG
+ help
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
+
+config FTPGET
bool "ftpget"
default n
help
Retrieve a remote file via FTP.
-config CONFIG_FTPPUT
+config FTPPUT
bool "ftpput"
default n
help
Store a remote file via FTP.
-config CONFIG_HOSTNAME
+config FEATURE_FTPGETPUT_LONG_OPTIONS
+ bool "Enable long options in ftpget/ftpput"
+ default n
+ depends on GETOPT_LONG && (FTPGET || FTPPUT)
+ help
+ Support long options for the ftpget/ftpput applet.
+
+config HOSTNAME
bool "hostname"
default n
help
- Please submit a patch to add help text for this item.
+ Show or set the system's host name
-config CONFIG_HTTPD
+config HTTPD
bool "httpd"
default n
help
Serve web pages via an HTTP server.
-config CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool " Enable Basic Authentication and IP address checking"
+config FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool "Support reloading the global config file using hup signal"
+ default n
+ depends on HTTPD && FEATURE_HTTPD_WITHOUT_INETD
+ help
+ This option enables processing of SIGHUP to reload cached
+ configuration settings.
+
+config FEATURE_HTTPD_SETUID
+ bool "Enable support -u <user> option"
+ default n
+ depends on HTTPD && FEATURE_HTTPD_WITHOUT_INETD
+ help
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
+
+config FEATURE_HTTPD_BASIC_AUTH
+ bool "Enable Basic http Authentication"
+ default y
+ depends on HTTPD
+ help
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config FEATURE_HTTPD_AUTH_MD5
+ bool "Support MD5 crypted passwords for http Authentication"
+ default n
+ depends on FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per URL authentication from /etc/httpd.conf
+ using md5 passwords.
+
+config FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+ bool "Support loading additional MIME types at run-time"
+ default n
+ depends on HTTPD
+ help
+ This option enables support for additional MIME types at
+ run-time to be specified in the configuration file.
+
+config FEATURE_HTTPD_CGI
+ bool "Support Common Gateway Interface (CGI)"
+ default y
+ depends on HTTPD
+ help
+ This option allows scripts and executables to be invoked
+ when specific URLs are requested.
+
+config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+ bool "Enable support for running scripts through an interpreter"
+ default n
+ depends on FEATURE_HTTPD_CGI
+ help
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an addition line in your httpd
+ config file:
+ *.php:/path/to/your/php
+
+config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+ bool "Support the REMOTE_PORT environment variable for CGI"
default n
- depends on CONFIG_HTTPD
+ depends on FEATURE_HTTPD_CGI
help
- Utilizes /etc/httpd.conf for security settings allowing
- ip address filtering and basic authentication on a per url basis.
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
-config CONFIG_IFCONFIG
+config FEATURE_HTTPD_ENCODE_URL_STR
+ bool "Enable the -e option for shell script CGI simplification."
+ default y
+ depends on HTTPD
+ help
+ This option allows html encoding arbitrary
+ strings for display of the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" as
+ "<Hello World>".
+
+config IFCONFIG
bool "ifconfig"
default n
help
- Please submit a patch to add help text for this item.
+ Ifconfig is used to configure the kernel-resident network interfaces.
-config CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
+config FEATURE_IFCONFIG_STATUS
+ bool "Enable status reporting output (+7k)"
default y
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
- Please submit a patch to add help text for this item.
+ If ifconfig is called with no arguments it will display the status
+ of the currently active interfaces.
-config CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+config FEATURE_IFCONFIG_SLIP
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
+ planning on using serial lines, leave this unchecked.
-config CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Allow the start address for shared memory, start address for I/O,
+ and/or the interrupt line used by the specified device.
-config CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
+config FEATURE_IFCONFIG_HW
+ bool "Enable option \"hw\" (ether only)"
default y
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Set the hardware address of this interface, if the device driver
+ supports this operation. Currently, we only support the 'ether'
+ class.
-config CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
+config FEATURE_IFCONFIG_BROADCAST_PLUS
+ bool "Set the broadcast automatically"
default n
- depends on CONFIG_IFCONFIG
+ depends on IFCONFIG
help
- Please submit a patch to add help text for this item.
+ Setting this will make ifconfig attempt to find the broadcast
+ automatically if the value '+' is used.
-config CONFIG_IFUPDOWN
+config IFUPDOWN
bool "ifupdown"
default n
+ select RUN_PARTS
+ help
+ Activate or deactivate the specified interfaces. This applet makes
+ use of either "ifconfig" and "route" or the "ip" command to actually
+ configure network interfaces. Therefore, you will probably also want
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
+ course you could use non-busybox versions of these programs, so
+ against my better judgement (since this will surely result in plenty
+ of support questions on the mailing list), I do not force you to
+ enable these additional options. It is up to you to supply either
+ "ifconfig" and "route" or the "ip" command, either via busybox or via
+ standalone utilities.
+
+config FEATURE_IFUPDOWN_IP
+ bool "Use ip applet"
+ default n
+ depends on IFUPDOWN
+ help
+ Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+ than the default of using the older 'ifconfig' and 'route' utilities.
+
+config FEATURE_IFUPDOWN_IP_BUILTIN
+ bool "Use busybox ip applet"
+ default y
+ depends on FEATURE_IFUPDOWN_IP
+ select IP
+ select FEATURE_IP_ADDRESS
+ select FEATURE_IP_LINK
+ select FEATURE_IP_ROUTE
help
- Please submit a patch to add help text for this item.
+ Use the busybox iproute "ip" applet to implement "ifupdown".
+
+ If left disabled, you must install the full-blown iproute2
+ utility or the "ifup" and "ifdown" applets will not work.
-config CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
+config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+ bool "Use busybox ifconfig and route applets"
default y
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
+ select IFCONFIG
+ select ROUTE
help
- Please submit a patch to add help text for this item.
+ Use the busybox iproute "ifconfig" and "route" applets to
+ implement the "ifup" and "ifdown" utilities.
+
+ If left disabled, you must install the full-blown ifconfig
+ and route utilities, or the "ifup" and "ifdown" applets will not
+ work.
-config CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6 (requires ip command)"
+config FEATURE_IFUPDOWN_IPV4
+ bool "Enable support for IPv4"
+ default y
+ depends on IFUPDOWN
+ help
+ If you want busybox to talk IPv4, leave this on.
+
+config FEATURE_IFUPDOWN_IPV6
+ bool "Enable support for IPv6"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN && FEATURE_IPV6
help
- Please submit a patch to add help text for this item.
+ If you need support for IPv6, turn this option on.
-config CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX (requires ipx_interface command)"
+config FEATURE_IFUPDOWN_IPX
+ bool "Enable support for IPX"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
- Please submit a patch to add help text for this item.
+ If this option is selected you can use busybox to work with IPX
+ networks.
-config CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
+config FEATURE_IFUPDOWN_MAPPING
+ bool "Enable mapping support"
default n
- depends on CONFIG_IFUPDOWN
+ depends on IFUPDOWN
help
This enables support for the "mapping" stanza, unless you have
- a weird network setup you dont need it.
+ a weird network setup you don't need it.
-config CONFIG_IP
- bool "ip"
+config INETD
+ bool "inetd"
default n
+ select FEATURE_SYSLOG
help
- Please submit a patch to add help text for this item.
-
-if CONFIG_IP && CONFIG_IPADDR
- config CONFIG_FEATURE_IP_ADDRESS
- default y
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && CONFIG_IPADDR)
- config CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default n
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPLINK
- config CONFIG_FEATURE_IP_LINK
- default y
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && CONFIG_IPLINK)
- config CONFIG_FEATURE_IP_LINK
- bool " link"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPROUTE
- config CONFIG_FEATURE_IP_ROUTE
- default y
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && CONFIG_IPROUTE)
- config CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-if CONFIG_IP && CONFIG_IPTUNNEL
- config CONFIG_FEATURE_IP_TUNNEL
- default y
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && CONFIG_IPTUNNEL)
- config CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default y
- depends on CONFIG_IP
- help
- Please submit a patch to add help text for this item.
-endif
-
-config CONFIG_IPCALC
- bool "ipcalc"
+ Internet superserver daemon
+
+config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
+ default y
+ depends on INETD
+ help
+ Echo received data internal inetd service
+
+config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
+ default y
+ depends on INETD
+ help
+ Internet /dev/null internal inetd service
+
+config FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
+ default y
+ depends on INETD
+ help
+ Return 32 bit time since 1900 internal inetd service
+
+config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
+ default y
+ depends on INETD
+ help
+ Return human-readable time internal inetd service
+
+config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
+ default y
+ depends on INETD
+ help
+ Familiar character generator internal inetd service
+
+config FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default n
+ depends on INETD
+ help
+ Suuport Sun-RPC based services
+
+
+config IP
+ bool "ip"
default n
help
- Please submit a patch to add help text for this item.
+ The "ip" applet is a TCP/IP interface configuration and routing
+ utility. You generally don't need "ip" to use busybox with
+ TCP/IP.
+
+config FEATURE_IP_ADDRESS
+ bool "ip address"
+ default y
+ depends on IP
+ help
+ Address manipulation support for the "ip" applet.
+
+config FEATURE_IP_LINK
+ bool "ip link"
+ default y
+ depends on IP
+ help
+ Configure network devices with "ip".
-config CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 300 bytes"
+config FEATURE_IP_ROUTE
+ bool "ip route"
default y
- depends on CONFIG_IPCALC
+ depends on IP
help
- Please submit a patch to add help text for this item.
+ Add support for routing table management to "ip".
-config CONFIG_IPADDR
- bool "ipaddr"
+config FEATURE_IP_TUNNEL
+ bool "ip tunnel"
default n
+ depends on IP
help
- Please submit a patch to add help text for this item.
+ Add support for tunneling commands to "ip".
-config CONFIG_IPLINK
- bool "iplink"
+config FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands."
default n
+ depends on IP
help
- Please submit a patch to add help text for this item.
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
+
+config IPADDR
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS
+
+config IPLINK
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK
+
+config IPROUTE
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE
+
+config IPTUNNEL
+ bool
+ default y
+ depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL
-config CONFIG_IPROUTE
- bool "iproute"
+config IPCALC
+ bool "ipcalc"
default n
help
- Please submit a patch to add help text for this item.
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
-config CONFIG_IPTUNNEL
- bool "iptunnel"
+config FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default y
+ depends on IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of "ipcalc".
+
+config FEATURE_IPCALC_LONG_OPTIONS
+ bool "Enable long options"
default n
+ depends on IPCALC && GETOPT_LONG
help
- Please submit a patch to add help text for this item.
+ Support long options for the ipcalc applet.
-config CONFIG_NAMEIF
+config NAMEIF
bool "nameif"
default n
+ select FEATURE_SYSLOG
help
- nameif used to rename network interface by its MAC address.
+ nameif is used to rename network interface by its MAC address.
Renamed interfaces MUST be in the down state.
- It is possible to use file (default: /etc/mactab)
+ It is possible to use a file (default: /etc/mactab)
with list of new interface names and MACs.
Maximum interface name length: IF_NAMESIZE = 16
- File fields are sepatated by space or tab.
+ File fields are separated by space or tab.
File format:
# Comment
- new_interface_name XX:XX:XX:XX:XX:XX
+ new_interface_name XX:XX:XX:XX:XX:XX
-config CONFIG_NC
+config NC
bool "nc"
default n
help
- Please submit a patch to add help text for this item.
+ A simple Unix utility which reads and writes data across network
+ connections.
-config CONFIG_NETSTAT
+config NC_SERVER
+ bool "Netcat server options (-lp)"
+ default n
+ depends on NC
+ help
+ Allow netcat to act as a server.
+
+config NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
+
+config NETSTAT
bool "netstat"
default n
help
- Please submit a patch to add help text for this item.
+ netstat prints information about the Linux networking subsystem.
-config CONFIG_NSLOOKUP
+config NSLOOKUP
bool "nslookup"
default n
help
- Please submit a patch to add help text for this item.
+ nslookup is a tool to query Internet name servers.
-config CONFIG_PING
+config PING
bool "ping"
default n
help
- Please submit a patch to add help text for this item.
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
-config CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
+config FEATURE_FANCY_PING
+ bool "Enable fancy ping output"
default y
- depends on CONFIG_PING
+ depends on PING
help
- Please submit a patch to add help text for this item.
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
-config CONFIG_PING6
+config PING6
bool "ping6"
default n
- depends on CONFIG_FEATURE_IPV6
+ depends on FEATURE_IPV6
help
- Please submit a patch to add help text for this item.
+ This will give you a ping that can talk IPv6.
-config CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
+config FEATURE_FANCY_PING6
+ bool "Enable fancy ping6 output"
default y
- depends on CONFIG_PING6
+ depends on PING6
help
- Please submit a patch to add help text for this item.
+ Make the output from the ping6 applet include statistics, and at the
+ same time provide full support for ICMP packets.
-config CONFIG_ROUTE
+config ROUTE
bool "route"
default n
help
- Please submit a patch to add help text for this item.
+ Route displays or manipulates the kernel's IP routing tables.
-config CONFIG_TELNET
+config TELNET
bool "telnet"
default n
help
- Please submit a patch to add help text for this item.
+ Telnet is an interface to the TELNET protocol, but is also commonly
+ used to test other simple protocols.
+
+config FEATURE_TELNET_TTYPE
+ bool "Pass TERM type to remote host"
+ default y
+ depends on TELNET
+ help
+ Setting this option will forward the TERM environment variable to the
+ remote host you are connecting to. This is useful to make sure that
+ things like ANSI colors and other control sequences behave.
-config CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
+config FEATURE_TELNET_AUTOLOGIN
+ bool "Pass USER type to remote host"
default y
- depends on CONFIG_TELNET
+ depends on TELNET
help
- Please submit a patch to add help text for this item.
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
-config CONFIG_TELNETD
+config TELNETD
bool "telnetd"
default n
+ select FEATURE_SYSLOG
+ help
+ A daemon for the TELNET protocol, allowing you to log onto the host
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
+ http://matt.ucc.asn.au/dropbear/dropbear.html
+
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
+ UNIX98_PTYS=y
+ DEVPTS_FS=y
+
+ Next, you need a /dev/pts directory on your root filesystem:
+
+ $ ls -ld /dev/pts
+ drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
+
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+ $ ls -la /dev/ptmx
+ crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
+
+ mount -t devpts devpts /dev/pts
+
+ You need to be sure that Busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
+
+ chown root.root /bin/busybox
+ chmod 4755 /bin/busybox
+
+ with all that done, telnetd _should_ work....
+
+
+config FEATURE_TELNETD_INETD
+ bool "Support call from inetd only"
+ default n
+ depends on TELNETD
help
- Please submit a patch to add help text for this item.
+ Selecting this will make telnetd only callable from inetd,
+ removing the standalone support.
-config CONFIG_TFTP
+config TFTP
bool "tftp"
default n
help
- Please submit a patch to add help text for this item.
+ This enables the Trivial File Transfer Protocol client program. TFTP
+ is usually used for simple, small transfers such as a root image
+ for a network-enabled bootloader.
-config CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
+config FEATURE_TFTP_GET
+ bool "Enable \"get\" command"
default y
- depends on CONFIG_TFTP
+ depends on TFTP
help
- Please submit a patch to add help text for this item.
+ Add support for the GET command within the TFTP client. This allows
+ a client to retrieve a file from a TFTP server.
-config CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
+config FEATURE_TFTP_PUT
+ bool "Enable \"put\" command"
default y
- depends on CONFIG_TFTP
+ depends on TFTP
help
- Please submit a patch to add help text for this item.
+ Add support for the PUT command within the TFTP client. This allows
+ a client to transfer a file to a TFTP server.
-config CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
+config FEATURE_TFTP_BLOCKSIZE
+ bool "Enable \"blocksize\" command"
default n
- depends on CONFIG_TFTP
+ depends on TFTP
help
- Please submit a patch to add help text for this item.
+ Allow the client to specify the desired block size for transfers.
-config CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
- default y
- depends on CONFIG_TFTP
+config DEBUG_TFTP
+ bool "Enable debug"
+ default n
+ depends on TFTP
help
- Please submit a patch to add help text for this item.
+ Enable debug settings for tftp. This is useful if you're running
+ into problems with tftp as the protocol doesn't help you much when
+ you run into problems.
-config CONFIG_TRACEROUTE
+config TRACEROUTE
bool "traceroute"
default n
help
- Please submit a patch to add help text for this item.
+ Utility to trace the route of IP packets
-config CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
- default y
- depends on CONFIG_TRACEROUTE
+config FEATURE_TRACEROUTE_VERBOSE
+ bool "Enable verbose output"
+ default n
+ depends on TRACEROUTE
help
- Please submit a patch to add help text for this item.
+ Add some verbosity to traceroute. This includes amongst other things
+ hostnames and ICMP response types.
-config CONFIG_FEATURE_TRACEROUTE_SO_DEBUG
- bool " Enable SO_DEBUG option"
- default y
- depends on CONFIG_TRACEROUTE
+config FEATURE_TRACEROUTE_SOURCE_ROUTE
+ bool "Enable loose source route"
+ default n
+ depends on TRACEROUTE
help
- Please submit a patch to add help text for this item.
+ Add option to specify a loose source route gateway
+ (8 maximum).
-config CONFIG_WGET
+config FEATURE_TRACEROUTE_USE_ICMP
+ bool "Use ICMP instead of UDP"
+ default n
+ depends on TRACEROUTE
+ help
+ Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source networking/udhcp/Config.in
+
+config VCONFIG
+ bool "vconfig"
+ default n
+ help
+ Creates, removes, and configures VLAN interfaces
+
+config WGET
bool "wget"
default n
help
- Please submit a patch to add help text for this item.
+ wget is a utility for non-interactive download of files from HTTP,
+ HTTPS, and FTP servers.
-config CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
+config FEATURE_WGET_STATUSBAR
+ bool "Enable a nifty process meter (+2k)"
default y
- depends on CONFIG_WGET
+ depends on WGET
help
- Please submit a patch to add help text for this item.
+ Enable the transfer progress bar for wget transfers.
-config CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
+config FEATURE_WGET_AUTHENTICATION
+ bool "Enable HTTP authentication"
default y
- depends on CONFIG_WGET
+ depends on WGET
help
- Please submit a patch to add help text for this item.
+ Support authenticated HTTP transfers.
-source networking/udhcp/Config.in
+config FEATURE_WGET_IP6_LITERAL
+ bool "Enable IPv6 literal addresses"
+ default y
+ depends on WGET && FEATURE_IPV6
+ help
+ Support IPv6 address literal notation in URLs.
-endmenu
+config FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on WGET && GETOPT_LONG
+ help
+ Support long options for the wget applet.
+
+config ZCIP
+ bool "zcip"
+ default n
+ select FEATURE_SYSLOG
+ help
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
+
+endmenu