Devkit8000: Switch over to enable_gpmc_cs_config

[oweals/u-boot.git] / nand_spl / nand_boot.c

diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 9545a9a7b51ea73173fc5935c4705e6e60575f2c..2326962b20fca42c8f432a683ae01a7b2ed3772e 100644 (file)
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -122,14 +122,59 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
        nand_command(mtd, block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
 
        /*
-        * Read one byte
+        * Read one byte (or two if it's a 16 bit chip).
         */
-       if (readb(this->IO_ADDR_R) != 0xff)
-               return 1;
+       if (this->options & NAND_BUSWIDTH_16) {
+               if (readw(this->IO_ADDR_R) != 0xffff)
+                       return 1;
+       } else {
+               if (readb(this->IO_ADDR_R) != 0xff)
+                       return 1;
+       }
 
        return 0;
 }
 
+#if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST)
+static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
+{
+       struct nand_chip *this = mtd->priv;
+       u_char *ecc_calc;
+       u_char *ecc_code;
+       u_char *oob_data;
+       int i;
+       int eccsize = CONFIG_SYS_NAND_ECCSIZE;
+       int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
+       int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+       uint8_t *p = dst;
+
+       /*
+        * No malloc available for now, just use some temporary locations
+        * in SDRAM
+        */
+       ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
+       ecc_code = ecc_calc + 0x100;
+       oob_data = ecc_calc + 0x200;
+
+       nand_command(mtd, block, page, 0, NAND_CMD_READOOB);
+       this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+       nand_command(mtd, block, page, 0, NAND_CMD_READ0);
+
+       /* Pick the ECC bytes out of the oob data */
+       for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+               ecc_code[i] = oob_data[nand_ecc_pos[i]];
+
+
+       for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+               this->ecc.hwctl(mtd, NAND_ECC_READ);
+               this->read_buf(mtd, p, eccsize);
+               this->ecc.calculate(mtd, p, &ecc_calc[i]);
+               this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+       }
+
+       return 0;
+}
+#else
 static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 {
        struct nand_chip *this = mtd->priv;
@@ -141,7 +186,6 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
        int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
        int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
        uint8_t *p = dst;
-       int stat;
 
        nand_command(mtd, block, page, 0, NAND_CMD_READ0);
 
@@ -171,11 +215,12 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
                 * from correct_data(). We just hope that all possible errors
                 * are corrected by this routine.
                 */
-               stat = this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+               this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
        }
 
        return 0;
 }
+#endif /* #if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST) */
 
 static int nand_load(struct mtd_info *mtd, unsigned int offs,
                     unsigned int uboot_size, uchar *dst)
@@ -221,7 +266,6 @@ void nand_boot(void)
 {
        struct nand_chip nand_chip;
        nand_info_t nand_info;
-       int ret;
        __attribute__((noreturn)) void (*uboot)(void);
 
        /*
@@ -240,8 +284,8 @@ void nand_boot(void)
        /*
         * Load U-Boot image from NAND into RAM
         */
-       ret = nand_load(&nand_info, CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
-                       (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+       nand_load(&nand_info, CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+                 (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 #ifdef CONFIG_NAND_ENV_DST
        nand_load(&nand_info, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,